[U-Boot] NAND: mxc_nand reads/writes only first 512 bytes of each page

[Stefano Babic]

On 01/09/2011 03:40 PM, Jason Liu wrote:
> Hi, Stefano,
> 

Hi Jason,

> Have you set the page_size correctly with the following register?

Let's see...

> 
> 49.4.3.7 Reset Control and Sourse Register - RCSR:
> 
> NFC_4K
> This bit is used to config the NandFlash page size. It is defined by
> PAGE_SIZE while boot up, and it can be
> configured by software after boot up.
> 0 not 4k page
> 1 4k page
> 8

This seems ok.

> NFC_FMS
> This bit is used to config the NandFlash page size.It is defined by
> PAGE_SIZE while boot up,and it can be
> configured by software after boot up.
> 0 not 2k page
> 1 2k page

That's it ! This was wrong on my board. I set the NFC_FMS bit and the
whole page is now read correctly.

Many thanks,

Stefano Babic

-- 
=====================================================================
DENX Software Engineering GmbH,     MD: Wolfgang Denk & Detlev Zundel
HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany
Phone: +49-8142-66989-0 Fax: +49-8142-66989-80  Email: office at denx.de
=====================================================================