[U-Boot] Booting linux 2.6.37+ on rsk7203 eva board

[Fabio Giovagnini]

These are my news

Hi all, I have this condition now
 when I do
make zImage
and 
make bootstrap
(i link zImage at 0x00040000 after a simple bootloader)
the system work and zImage decompress itself at 0x0C100000
when I make
make uiImage
of the same kernel
and I execute it usinf u-bbot it doesn't work.
There could be 2 reasons
1) address problem
bootargs problem, but my kernel is built using BOOTCMD_OVERWRITE option.

Any ideas?

Thanks


On Monday 17 January 2011 19:24:14 Fabio Giovagnini wrote:
> Ok, rigth.
> I'mm newbe of u-bbot and I'd loke to contribute.
> What could be the usefull info for you?
> 
> Thanks in advance
> 
> On Monday 17 January 2011 19:21:27 Wolfgang Denk wrote:
> > Dear Fabio Giovagnini,
> > 
> > In message <201101171908.02343.fabio.giovagnini at aurion-tech.com> you 
wrote:
> > > Hi All this is what I do:
> > > 1) I run u-Boot getting this output:
> > > U-Boot 2010.12-09860-g9cb5761-dirty (Jan 17 2011 - 18:05:12)
> > > 
> > > CPU: SH2A
> > > BOARD: MLCD7203
> > 
> > This appears to be an out-of-tree port, i. e. code which is completely
> > unknown to us.
> > 
> > > Any ideas about why the kernelò do not send out anything?
> > 
> > We don't know your code, we don't know which exact commands you're
> > running, we don't see your environment, we don't know nothing.
> > 
> > How could we then come up with helpful comments?
> > 
> > Best regards,
> > 
> > Wolfgang Denk

-- 
Ing. Fabio Giovagnini

Aurion s.r.l.
P.I e C.F.
00885711200
skype: aurion.giovagnini
Tel. +39.051.594.78.24
Fax. +39.051.082.14.49
Cell. +39.335.83.50.919
www.aurion-tech.com