[U-Boot] U-boot Config Parameters on Compact Flash

[Dach Miroslaw]

Dear Wolfgang,

Thank you very much for your hints. This is a good staring point for me to continue with u-boot and Compact Flash.

Best Regards

Miroslaw Dach



-----Original Message-----
From: Wolfgang Denk [mailto:wd at denx.de]
Sent: Sat 1/22/2011 8:39 PM
To: Dach Miroslaw
Cc: u-boot at lists.denx.de
Subject: Re: [U-Boot] U-boot Config Parameters on Compact Flash
 
Dear "Dach Miroslaw",

In message <1B4F8000449511488D1A640DD6DECA350392A61B at MAILBOX0A.psi.ch> you wrote:
> 
> Could you please direct me to some manual/"how to" to find out how to
> configure IDE 
> access by means of the CONFIG_IDE_* . I have examined several header
> files in u-boot/include/configs
> and it seems to be that CONFIG_ATA_* could be/should be used in
> conjunction with CONFIG_IDE_*?

I'm not an expert with Xilinx FPGAs and have no idea what needs to be
done to enable the ACE in them.  A "grep SYS_ACE" in include/configs/*
turns up only the icon and katmai boards that appearently enable a
Xilinx ACE controll, but these are PPC440SPe boards, i. e. no Xilinx
FPGA based solutions.

You will have to read the respective user manuals yourself.

Or hire an expert.

Best regards,

Wolfgang Denk

-- 
DENX Software Engineering GmbH,     MD: Wolfgang Denk & Detlev Zundel
HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany
Phone: (+49)-8142-66989-10 Fax: (+49)-8142-66989-80 Email: wd at denx.de
Any sufficiently advanced technology is indistinguishable from magic.
Clarke's Third Law       - _Profiles of the Future_ (1962; rev. 1973)
                  ``Hazards of Prophecy: The Failure of Imagination''