[U-Boot] [PATCH v2 2/3] Add support for Bluewater Systems Snapper 9260 and 9G20 modules

[Ryan Mallon]

On 01/26/2011 08:40 PM, Reinhard Meyer wrote:
> Dear Wolfgang Denk,
>> Dear Ryan Mallon,
>>
>> In
>> message<e3e679839f735fff180547840a3fe3cec2b1d535.1295995460.git.ryan at bluewatersys.com> 
>> you wrote:
>>>
>>> Signed-off-by: Ryan Mallon<ryan at bluewatersys.com>
>>> ---
>>>   board/bluewater/snapper9260/Makefile      |   53 ++++++++
>>>   board/bluewater/snapper9260/snapper9260.c |  169
>>> +++++++++++++++++++++++++
>>>   include/configs/snapper9260.h             |  191
>>> +++++++++++++++++++++++++++++
>>>   3 files changed, 413 insertions(+), 0 deletions(-)
>>>   create mode 100644 board/bluewater/snapper9260/Makefile
>>>   create mode 100644 board/bluewater/snapper9260/snapper9260.c
>>>   create mode 100644 include/configs/snapper9260.h
>>
>> Entry to MAINTAINERS and boards.cfg missing.
> 
> I am already engaged into this. There are minor coding issues involved,
> I will comment on them later.

Hi Reinhard,

Did you have any additional changes you want made for the
Snapper9260/9G20 patches other than adding a MAINTAINERS entry and
rolling the boards.cfg change into a single patch?

Thanks,
~Ryan

-- 
Bluewater Systems Ltd - ARM Technology Solution Centre

Ryan Mallon         		5 Amuri Park, 404 Barbadoes St
ryan at bluewatersys.com         	PO Box 13 889, Christchurch 8013
http://www.bluewatersys.com	New Zealand
Phone: +64 3 3779127		Freecall: Australia 1800 148 751
Fax:   +64 3 3779135			  USA 1800 261 2934