[U-Boot] [PATCH 6/6] p1021mds: add QE and UEC support

[Haiying Wang]

On Mon, 2011-01-31 at 21:11 +0100, Wolfgang Denk wrote:
> >  
> > +#ifdef CONFIG_P1021
> > +	ccsr_gur_t *gur = (void *)(CONFIG_SYS_MPC85xx_GUTS_ADDR);
> > +
> > +	/* QE9 and QE12 need to be set for enabling QE MII managment signals */
> > +	setbits_be32(&gur->pmuxcr, MPC85xx_PMUXCR_QE9);
> > +	setbits_be32(&gur->pmuxcr, MPC85xx_PMUXCR_QE12);
> > +#endif
> ...
> 
> Can we please avoid having board specific code in common files?
I wish I could, but only P1021 has such pin mux problems.

> If this is really necessary, it shoud be a feature-specific #define,
> not a board specific one.
I don't know whether this *feature* will show up on other SoC. But if
you insist, I can use CONFIG_QE_PIN_MUX.

Thanks.

Haiying