[U-Boot] [PATCH V4 3/5] nand spl: add NAND Library to new SPL

[Simon Schwarz]

Dear Scott Wood,

On 07/26/2011 08:04 PM, Scott Wood wrote:
> On Tue, 26 Jul 2011 14:09:16 +0200
> Simon Schwarz<simonschwarzcor at googlemail.com>  wrote:
>
>> diff --git a/drivers/mtd/nand/Makefile b/drivers/mtd/nand/Makefile
>> index 8b598f6..cdc9a14 100644
>> --- a/drivers/mtd/nand/Makefile
>> +++ b/drivers/mtd/nand/Makefile
>> @@ -26,12 +26,16 @@ include $(TOPDIR)/config.mk
>>   LIB	:= $(obj)libnand.o
>>
>>   ifdef CONFIG_CMD_NAND
>> +ifdef CONFIG_SPL_BUILD
>> +COBJS-y += nand_spl.o
>> +else
>>   COBJS-y += nand.o
>>   COBJS-y += nand_base.o
>>   COBJS-y += nand_bbt.o
>> -COBJS-y += nand_ecc.o
>>   COBJS-y += nand_ids.o
>>   COBJS-y += nand_util.o
>> +endif
>> +COBJS-y += nand_ecc.o
>
> You're assuming all NAND SPLs will want nand_ecc -- this will not fit in
> most current ones.

True. I changed it to:
ifdef CONFIG_SPL_BUILD
COBJS-y += nand_spl.o
ifdef CONFIG_OMAP34XX
COBJS-y += nand_ecc.o
endif
else
COBJS-y += nand.o
COBJS-y += nand_base.o
COBJS-y += nand_bbt.o
COBJS-y += nand_ids.o
COBJS-y += nand_util.o
COBJS-y += nand_ecc.o
endif

Is there a simple way to write that without duplication of nand_ecc?

>
> Where is nand_spl.c, and what is in it that is appropriate for all targets?
It is essentially the old nand_boot.c from nand_spl. It is added with 
this patch to drivers/mtd/nand/nand_spl.c

So IMHO all boards which are activating the nand library for SPL need 
this one. There are some alternative implementations in the nand_spl - 
when they are added to the new SPL the devs may add switches as needed.

>
> -Scott
>

Regards & Thanks for your feedback!
Simon