[U-Boot] [PATCH V6 5/5] devkit8000: Add nand-spl support for new SPL

[Aneesh V]

On Thursday 28 July 2011 02:08 PM, Simon Schwarz wrote:
> Add NAND SPL support to the devkit8000 config
>
> Signed-off-by: Simon Schwarz<simonschwarzcor at gmail.com>
> ---
> V1 changes:
> ADD devkit8000_nand to board.cfg
> ADD nand_spl Makefile, llinker script, spl-devkit8000.c
> ADD config ecc, SRAM, SPL to board config
> ADD CONFIG_SYS_SRAM_START and _SIZE to board config
> ADD CONFIG_SYS_SPL_TEXT_BASE, _MAX_SIZE and SPL_STACK to board config
>
> V2 changes:
> ADD CONFIG_SPL and LIBCOMMON, LIBDISK, I2C, LIBGENERIC, SERIAL, POWER, NAND and
> 	CONFIG_SPL_LDSCRIPT to board config
> CHG renamed CONFIG_SYS_SPL_* to CONFIG_SPL_*
> ADD CONFIG_SYS_NAND_U_BOOT_START, _OFFS, _SIZE, _DST to board config: Where to
> 	expect u-boot and where to load it.
> ADD some barrier to not build board_eth_init in SPL
> DEL no changes to board.cfg
> DEL everything used the old nand_spl layout (Makefile, linker script,
> 	spl-devkit8000.c)
> CHG cosmetic
>
> V3 changes:
> CHG Deleted wrong comment
>
> V4 changes:
> CHG CONFIG_SYS_SRAM_SIZE NOW has the right value
> CHG cosmetic - corrected style problems
>
> V5 changes:
> nothing
>
> V6 changes:
> nothing
>
> Transition from V1 to V2 also includes that this patch is now based on
> 	- the new SPL layout by Aneesh V and Daniel Schwierzeck
>    	- the OMAP4 SPL patches by Aneesh V
>
> This is the successor of "[U-Boot,5/5] devkit8000 nand_spl: add nand_spl
> support"
> (http://article.gmane.org/gmane.comp.boot-loaders.u-boot/102111)
> ---
>   board/timll/devkit8000/devkit8000.c |    2 +-
>   include/configs/devkit8000.h        |   46 +++++++++++++++++++++++++++++++++++
>   2 files changed, 47 insertions(+), 1 deletions(-)
>
> diff --git a/board/timll/devkit8000/devkit8000.c b/board/timll/devkit8000/devkit8000.c
> index 95afaaa..9b53742 100644
> --- a/board/timll/devkit8000/devkit8000.c
> +++ b/board/timll/devkit8000/devkit8000.c
> @@ -119,7 +119,7 @@ void set_muxconf_regs(void)
>   	MUX_DEVKIT8000();
>   }
>
> -#ifdef CONFIG_DRIVER_DM9000
> +#if defined(CONFIG_DRIVER_DM9000)&  !defined(CONFIG_SPL_BUILD)
>   /*
>    * Routine: board_eth_init
>    * Description: Setting up the Ethernet hardware.
> diff --git a/include/configs/devkit8000.h b/include/configs/devkit8000.h
> index 125c690..022069d 100644
> --- a/include/configs/devkit8000.h
> +++ b/include/configs/devkit8000.h
> @@ -307,4 +307,50 @@
>   		                                         CONFIG_SYS_INIT_RAM_SIZE - \
>   		                                         GENERATED_GBL_DATA_SIZE)
>
> +/* SRAM config */
> +#define CONFIG_SYS_SRAM_START              0x40200000
> +#define CONFIG_SYS_SRAM_SIZE               0x10000

OMAP3 secure devices do not have this much public SRAM. So, the above
values wouldn't work for it. I suggest the following values:

#define CONFIG_SYS_SRAM_START              0x40208000
#define CONFIG_SYS_SRAM_SIZE               0x8000 /* 32 KB */

#define CONFIG_SPL_TEXT_BASE		CONFIG_SYS_SRAM_START
#define CONFIG_SPL_MAX_SIZE		0x7C00  /* 31 K  - set aside at least 1K 
for stack*/

best regards,
Aneesh