[U-Boot] [PATCH V6 5/5] devkit8000: Add nand-spl support for new SPL

[Simon Schwarz]

Hi Aneesh,

On 07/28/2011 12:51 PM, Aneesh V wrote:
> On Thursday 28 July 2011 02:08 PM, Simon Schwarz wrote:
>> Add NAND SPL support to the devkit8000 config
>>
>> Signed-off-by: Simon Schwarz<simonschwarzcor at gmail.com>
>> ---
>> V1 changes:
>> ADD devkit8000_nand to board.cfg
>> ADD nand_spl Makefile, llinker script, spl-devkit8000.c
>> ADD config ecc, SRAM, SPL to board config
>> ADD CONFIG_SYS_SRAM_START and _SIZE to board config
>> ADD CONFIG_SYS_SPL_TEXT_BASE, _MAX_SIZE and SPL_STACK to board config
>>
>> V2 changes:
>> ADD CONFIG_SPL and LIBCOMMON, LIBDISK, I2C, LIBGENERIC, SERIAL, POWER,
>> NAND and
>> CONFIG_SPL_LDSCRIPT to board config
>> CHG renamed CONFIG_SYS_SPL_* to CONFIG_SPL_*
>> ADD CONFIG_SYS_NAND_U_BOOT_START, _OFFS, _SIZE, _DST to board config:
>> Where to
>> expect u-boot and where to load it.
>> ADD some barrier to not build board_eth_init in SPL
>> DEL no changes to board.cfg
>> DEL everything used the old nand_spl layout (Makefile, linker script,
>> spl-devkit8000.c)
>> CHG cosmetic
>>
>> V3 changes:
>> CHG Deleted wrong comment
>>
>> V4 changes:
>> CHG CONFIG_SYS_SRAM_SIZE NOW has the right value
>> CHG cosmetic - corrected style problems
>>
>> V5 changes:
>> nothing
>>
>> V6 changes:
>> nothing
>>
>> Transition from V1 to V2 also includes that this patch is now based on
>> - the new SPL layout by Aneesh V and Daniel Schwierzeck
>> - the OMAP4 SPL patches by Aneesh V
>>
>> This is the successor of "[U-Boot,5/5] devkit8000 nand_spl: add nand_spl
>> support"
>> (http://article.gmane.org/gmane.comp.boot-loaders.u-boot/102111)
>> ---
>> board/timll/devkit8000/devkit8000.c | 2 +-
>> include/configs/devkit8000.h | 46 +++++++++++++++++++++++++++++++++++
>> 2 files changed, 47 insertions(+), 1 deletions(-)
>>
>> diff --git a/board/timll/devkit8000/devkit8000.c
>> b/board/timll/devkit8000/devkit8000.c
>> index 95afaaa..9b53742 100644
>> --- a/board/timll/devkit8000/devkit8000.c
>> +++ b/board/timll/devkit8000/devkit8000.c
>> @@ -119,7 +119,7 @@ void set_muxconf_regs(void)
>> MUX_DEVKIT8000();
>> }
>>
>> -#ifdef CONFIG_DRIVER_DM9000
>> +#if defined(CONFIG_DRIVER_DM9000)& !defined(CONFIG_SPL_BUILD)
>> /*
>> * Routine: board_eth_init
>> * Description: Setting up the Ethernet hardware.
>> diff --git a/include/configs/devkit8000.h b/include/configs/devkit8000.h
>> index 125c690..022069d 100644
>> --- a/include/configs/devkit8000.h
>> +++ b/include/configs/devkit8000.h
>> @@ -307,4 +307,50 @@
>> CONFIG_SYS_INIT_RAM_SIZE - \
>> GENERATED_GBL_DATA_SIZE)
>>
>> +/* SRAM config */
>> +#define CONFIG_SYS_SRAM_START 0x40200000
>> +#define CONFIG_SYS_SRAM_SIZE 0x10000
>
> OMAP3 secure devices do not have this much public SRAM. So, the above
> values wouldn't work for it. I suggest the following values:

> #define CONFIG_SYS_SRAM_START 0x40208000
> #define CONFIG_SYS_SRAM_SIZE 0x8000 /* 32 KB */
>
> #define CONFIG_SPL_TEXT_BASE CONFIG_SYS_SRAM_START
> #define CONFIG_SPL_MAX_SIZE 0x7C00 /* 31 K - set aside at least 1K for
> stack*/

What do you mean by secure devices? Custom processors? The datasheet i 
have says 64K for OMAP35x devices.

Since this is the configuration for the devkit8000 and these devices 
have 64K SRAM I would prefer to leave these settings as they are.

If the SPL is ported to other OMAP3 devs with just 32K they can change 
the settings then. (At the moment the NAND SPL has 19K so this won't be 
a problem)

>
> best regards,
> Aneesh

Regards & thanks for reviewing
Simon