[U-Boot] [Patch V5] Add support for Bluewater Systems Snapper 9260/9G20 modules

[Reinhard Meyer]

Dear Simon Glass:
> From: Ryan Mallon <ryan at bluewatersys.com>
> 
> Add support for Bluewater Systems AT91 based Snapper 9260 and 9G20
> single board computer modules. Includes NAND flash and Ethernet
> support.
> 
> Signed-off-by: Ryan Mallon <ryan at bluewatersys.com>
> ---
> Build and run tested with new changes.
> 
> Changes for v5:
> - Previous patch was accepted but mostly lost during the commit process
> - This re-instates the lost bits from Ryan's patch
> - Also ran through checkpatch to clean up warnings
How then did this escape:

WARNING: please, no space before tabs
#350: FILE: include/configs/snapper9260.h:39:
+#define CONFIG_SYS_HZ ^I^I^I1000$

Fixed manually.
> ---
>  MAINTAINERS                               |    5 +
>  board/bluewater/snapper9260/Makefile      |   53 ++++++++
>  board/bluewater/snapper9260/snapper9260.c |  169 +++++++++++++++++++++++++
>  include/configs/snapper9260.h             |  191 +++++++++++++++++++++++++++++
>  4 files changed, 418 insertions(+), 0 deletions(-)
>  create mode 100644 board/bluewater/snapper9260/Makefile
>  create mode 100644 board/bluewater/snapper9260/snapper9260.c
>  create mode 100644 include/configs/snapper9260.h

Applied to u-boot-atmel. Will show up later - MAKEALL at91 still running ;)

Best Regards,
Reinhard