[U-Boot] OpenRD: booting u-boot from NAND

[Alexei Ozhigov]

Hello!

I am trying to launch U-Boot v2011.06-rc2 built with Codesourcery 2011
toolchain on OpenRD Ultimate board with no luck so far.
After resetting the board hangs without any symbols being printed on
console. OpenOCD shows PC value of 0xFFFF0BA6 (not 4-byte aligned!)
after halting the core.
The strange thing is that the image boots up successfully if booted
from SDRAM. U-boot-1.1.4 with the patch from open-rd.org does boot
from NAND.


Any suggestions on why booting from NAND is not working?

Best regards
Alexey Ozhigov