[U-Boot] OpenRD: booting u-boot from NAND

[Prafulla Wadaskar]

> -----Original Message-----
> From: u-boot-bounces at lists.denx.de [mailto:u-boot-bounces at lists.denx.de]
> On Behalf Of Alexei Ozhigov
> Sent: Wednesday, June 08, 2011 6:44 PM
> To: u-boot at lists.denx.de
> Subject: [U-Boot] OpenRD: booting u-boot from NAND
> 
> Hello!
> 
> I am trying to launch U-Boot v2011.06-rc2 built with Codesourcery 2011
> toolchain on OpenRD Ultimate board with no luck so far.
> After resetting the board hangs without any symbols being printed on
> console. OpenOCD shows PC value of 0xFFFF0BA6 (not 4-byte aligned!)
> after halting the core.
> The strange thing is that the image boots up successfully if booted
> from SDRAM. U-boot-1.1.4 with the patch from open-rd.org does boot
> from NAND.
> 
> 
> Any suggestions on why booting from NAND is not working?

Hi Alexey Ozhigov
Which image you are flashing? You should create a target u-boot.kwb and use this image to flash on the NAND.

I think you are flashing u-boot.bin, pls clarify

Pls refer: docs/README.kwbimage for details.

Regards..
Prafulla . .