[U-Boot] [PATCH v3 0/6] OMAP: fix build breaks on OMAP boards

Aneesh V aneesh at ti.com
Thu Jun 9 13:24:04 CEST 2011


Fix build breaks for OMAP boards.
All the build breaks were due to couple of missing
defines in the config file, namely:

CONFIG_SYS_SDRAM_BASE and CONFIG_SYS_INIT_SP_ADDR

They have been fixed by providing the right SDRAM
base address and by using SRAM base as the initial
stack address.

None of these have been tested as I do not have any of
these boards.

V2:
 * Replaced the magic number used for CONFIG_SYS_INIT_SP_ADDR
   with a symbolic name - PHYS_SRAM - indicating that SRAM is
   used for the intial stack. Made this change in all the
   patches.
V3:
 * Missed doing the V2 change for omap1610inn. Fixed that

Aneesh V (6):
  omap1610h2: fix build breaks
  omap5912osk: fix build breaks
  omap1510inn: fix build breaks
  omap1610inn: fix build breaks
  omap2420h4: fix build breaks
  omap730p2: fix build breaks

 include/configs/omap1510inn.h |    5 +++++
 include/configs/omap1610h2.h  |    5 +++++
 include/configs/omap1610inn.h |    5 +++++
 include/configs/omap2420h4.h  |    4 ++++
 include/configs/omap5912osk.h |    5 +++++
 include/configs/omap730p2.h   |    5 +++++
 6 files changed, 29 insertions(+), 0 deletions(-)



More information about the U-Boot mailing list