[U-Boot] [PATCH v3 0/6] OMAP: fix build breaks on OMAP boards

[Albert ARIBAUD]

Hi Aneesh,

Le 09/06/2011 13:24, Aneesh V a écrit :
> Fix build breaks for OMAP boards.
> All the build breaks were due to couple of missing
> defines in the config file, namely:
>
> CONFIG_SYS_SDRAM_BASE and CONFIG_SYS_INIT_SP_ADDR
>
> They have been fixed by providing the right SDRAM
> base address and by using SRAM base as the initial
> stack address.
>
> None of these have been tested as I do not have any of
> these boards.
>
> V2:
>   * Replaced the magic number used for CONFIG_SYS_INIT_SP_ADDR
>     with a symbolic name - PHYS_SRAM - indicating that SRAM is
>     used for the intial stack. Made this change in all the
>     patches.
> V3:
>   * Missed doing the V2 change for omap1610inn. Fixed that
>
> Aneesh V (6):
>    omap1610h2: fix build breaks
>    omap5912osk: fix build breaks
>    omap1510inn: fix build breaks
>    omap1610inn: fix build breaks
>    omap2420h4: fix build breaks
>    omap730p2: fix build breaks
>
>   include/configs/omap1510inn.h |    5 +++++
>   include/configs/omap1610h2.h  |    5 +++++
>   include/configs/omap1610inn.h |    5 +++++
>   include/configs/omap2420h4.h  |    4 ++++
>   include/configs/omap5912osk.h |    5 +++++
>   include/configs/omap730p2.h   |    5 +++++
>   6 files changed, 29 insertions(+), 0 deletions(-)

Hmm, seems like they don't apply cleanly above current 
u-boot-arm/master. Can you rebase and resend as V4 ?

Amicalement,
-- 
Albert.