[U-Boot] [PATCH v3 0/5] Add Highbank platform

[Rob Herring]

From: Rob Herring <rob.herring at calxeda.com>

This series enables non-PCI AHCI controllers and adds support for Calxeda
Highbank platform which uses the AHCI changes. I've dropped my SDHCI 
changes as now there are 2 versions of "common SDHCI" code on the list
and that needs sorting out.

Wolfgang, Albert,

Are there any more comments on these patches? If not, can you apply these
to your trees for v2011.09?

Rob

Rob Herring (5):
  ARM: Add Calxeda Highbank platform
  arm: add __ilog2 function
  scsi/ahci: ata id little endian fix
  scsi/ahci: add support for non-PCI controllers
  ARM: highbank: Add AHCI support

 arch/arm/cpu/armv7/highbank/Makefile  |   46 ++++++++++++
 arch/arm/cpu/armv7/highbank/config.mk |    4 +
 arch/arm/cpu/armv7/highbank/timer.c   |  124 +++++++++++++++++++++++++++++++++
 arch/arm/include/asm/bitops.h         |    9 +++
 board/highbank/Makefile               |   49 +++++++++++++
 board/highbank/highbank.c             |   58 +++++++++++++++
 boards.cfg                            |    1 +
 common/cmd_scsi.c                     |    6 +-
 drivers/block/ahci.c                  |   72 ++++++++++++++++---
 include/ahci.h                        |    4 +
 include/configs/highbank.h            |  112 +++++++++++++++++++++++++++++
 include/scsi.h                        |    1 +
 12 files changed, 474 insertions(+), 12 deletions(-)
 create mode 100644 arch/arm/cpu/armv7/highbank/Makefile
 create mode 100644 arch/arm/cpu/armv7/highbank/config.mk
 create mode 100644 arch/arm/cpu/armv7/highbank/timer.c
 create mode 100644 board/highbank/Makefile
 create mode 100644 board/highbank/highbank.c
 create mode 100644 include/configs/highbank.h

-- 
1.7.4.1