[U-Boot] [U-Boot, v4] NAND: add support for reading ONFI page table

[Florian Fainelli]

Le jeudi 17 mars 2011 00:42:55, Scott Wood a écrit :
> On Fri, Feb 25, 2011 at 12:01:34AM -0000, Florian Fainelli wrote:
> > From: Florian Fainelli <florian at openwrt.org>
> > 
> > This patch adds support for reading an ONFI page parameter from a NAND
> > device supporting it. If this is the case, struct nand_chip onfi_version
> > member contains the supported ONFI version, 0 otherwise.
> > 
> > This allows NAND drivers past nand_scan_ident to set the best timings for
> > the NAND chip.
> > 
> > Signed-off-by: Florian Fainelli <florian at openwrt.org>
> 
> Applied to u-boot-nand-flash next with this change:
> 
> diff --git a/drivers/mtd/nand/nand_base.c b/drivers/mtd/nand/nand_base.c
> index 0d7c819..fa286a8 100644
> --- a/drivers/mtd/nand/nand_base.c
> +++ b/drivers/mtd/nand/nand_base.c
> @@ -2585,7 +2585,7 @@ static const struct nand_flash_dev
> *nand_get_flash_type(st type = nand_flash_ids;
> 
>         for (; type->name != NULL; type++)
> -               if (dev_id == type->id)
> +               if (*dev_id == type->id)
>                         break;

My bad, thanks for fixing this and committing the patch!
--
Florian