[U-Boot] [non-working configuraton, post relocation 7/7] DNS323 configuration

[Rogan Dawes]

On 2011/03/19 9:19 AM, Heiko Schocher wrote:

>> Marvell>> bootm
>> ## Booting image at 00100000 ...
>>    Image Name:   UBoot dns323
>>    Image Type:   ARM U-Boot Kernel Image (uncompressed)
>>    Data Size:    170100 Bytes = 166.1 kB
>>    Load Address: 03000000
>>    Entry Point:  03000000
>>    Verifying Checksum ... OK
>> OK
>>
>> Starting kernel ...
> 
> With relocation, you must set TEXT_BASE to the value you start
> the image, so please try to set TEXT_BASE = load_addr.
> 
> Also, if you do a ram image, don;t forget that with relocation
> the u-boot image gets relocated to the end of ram, so don;t choose
> a TEXT_BASE near the end of ram.
> 
> If that not helps, you maybe need a debugger ...
> 
> bye,
> Heiko

Hi Heiko,

I did see that, and thought it might have something to do with it. I
also tried building a version with the TEXT_BASE at 0x100000, but had
exactly the same result.

It sounds like a debugger will be my only option. Fortunately, I should
be getting a Segger J-Link JTAG adapter on Tuesday, and then maybe I can
figure out what is going on.

Regards,

Rogan