[U-Boot] [PATCH 1/9] arm926ej-s: Invalidate instruction cache in flush_cache

[Aneesh V]

Hi Arden,

On Sunday 20 March 2011 08:00 AM, arden jay wrote:
> Hi Michael,
> Curiously, have any idea how to test cache stuff?

Recently I did some cache testing. Here is the technique I used for
data-cache:

To test flush:
* Write a known pattern to a region of memory
* Flush the region
* Invalidate the region
* Read back the region and see if you get the original pattern. If the
flush was effective you will see the original data.

To test Invalidate:
* Write a known pattern to a region of memory
* Invalidate the region immediately
* Read back the region and see if you get the original pattern. You
should *not* be seeing the expected pattern for the entire region if
the invalidate was successful.

Similar tests can be done for the I-cache, but maybe a little more
tedious.

I agree that these tests may not be 100% fool-proof - for instance what
if both invalidate and flush didn't work in the first case. But these
should at least catch very obvious errors and can be used in
combination with other techniques to make sure that your cache
operations are indeed working.

Additionally, there was a JTAG debugger technique that I found quite
useful. If your processor supports a technique called DAP(Debug Access
Port or Dual Access Port, I am not sure) then a debugger like
Lauterbach can view memory in two modes, one the normal or CPU mode and
the other DAP mode. In normal mode the memory is dumped as if it is
viewed from the CPU, so it goes through the cache and you see the cache
contents if the area in question is in cache. In DAP mode the
real memory contents are dumped. Comparing these two you can see
whether cache and memory are coherent for a given area. It worked quite
well with Lauterbach and OMAP4.

br,
Aneesh

>
> 2011/3/18 Michael Spang<mspang at csclub.uwaterloo.ca>:
>> If U-Boot is loaded from RAM and the OS is loaded into an overlapping
>> region, the instruction cache is not coherent when that OS is started.
>> We must therefore invalidate the instruction cache in addition to
>> cleaning the data cache.
>>
>> Signed-off-by: Michael Spang<mspang at csclub.uwaterloo.ca>
>> ---
>>   arch/arm/lib/cache.c |    2 ++
>>   1 files changed, 2 insertions(+), 0 deletions(-)
>>
>> diff --git a/arch/arm/lib/cache.c b/arch/arm/lib/cache.c
>> index 30686fe..047786a 100644
>> --- a/arch/arm/lib/cache.c
>> +++ b/arch/arm/lib/cache.c
>> @@ -37,6 +37,8 @@ void  flush_cache (unsigned long dummy1, unsigned long dummy2)
>>         asm("0: mrc p15, 0, r15, c7, c10, 3\n\t" "bne 0b\n" : : : "memory");
>>         /* disable write buffer as well (page 2-22) */
>>         asm("mcr p15, 0, %0, c7, c10, 4" : : "r" (0));
>> +       /* invalidate icache for coherence with cleaned dcache */
>> +       asm("mcr p15, 0, %0, c7, c5, 0" : : "r" (0));
>>   #endif
>>   #ifdef CONFIG_OMAP34XX
>>         void v7_flush_cache_all(void);
>> --
>> 1.7.2.3
>>
>> _______________________________________________
>> U-Boot mailing list
>> U-Boot at lists.denx.de
>> http://lists.denx.de/mailman/listinfo/u-boot
>>
>
>
>