[U-Boot] [PATCHv3 0/4] ST-Ericsson U8500 support

[John Rigby]

On Thu, Apr 28, 2011 at 8:41 PM, John Rigby <john.rigby at linaro.org> wrote:
> On Thu, Apr 28, 2011 at 9:40 AM, Albert ARIBAUD
> <albert.u.boot at aribaud.net> wrote:
>> Le 28/04/2011 16:47, John Rigby a écrit :
>>
>>>>  armv7: Add ST-Ericsson u8500 arch
>>>>  armv7: Add support for ST-Ericsson U8500 href platform
>>
>> Applying these on top of the current u-boot-arm/master and trying a MAKEALL
>> u8500_href (with an ELDK 4.2 toolchain) results in
>>
>> Configuring for u8500_href board...
>> u8500_href.c:30:49: error: ../../../drivers/mmc/arm_pl180_mmci.h: No such
>> file or directory
>> u8500_href.c:30:49: error: ../../../drivers/mmc/arm_pl180_mmci.h: No such
>> file or directory
>> u8500_href.c: In function 'hrefplus_mmc_power_init':
>> u8500_href.c:258: warning: implicit declaration of function 'prcmu_i2c_read'
>> u8500_href.c:265: warning: implicit declaration of function
>> 'prcmu_i2c_write'
>> u8500_href.c: In function 'board_mmc_init':
>> u8500_href.c:453: warning: implicit declaration of function
>> 'arm_pl180_mmci_init'
>>
>> Amicalement,
>> --
>> Albert.
>>
> Ok, we have a bit of a dependency problem.  I will followup on the
> pending mmc and i2c patches and once they have been committed ping
> you.
>
Heiko has acked the i2c patch and indicated it was ok for you to
commit it with the others.  The soc and board patches apply cleanly
and build now that the mmc driver is in.  So I think these can go in
now.

I will ping Wolfgang about the pl011 serial patch.

Thanks,
John