[U-Boot] Write error on fsl_esdhc driver

Stefano Babic sbabic at denx.de
Fri May 13 15:21:00 CEST 2011


On 05/13/2011 02:35 PM, Fabio Estevam wrote:
> Hi,
> 
Hi Fbio,

> When trying to save environment variables into a SD card on MX51 and
> MX53 boards I am getting the following error:
> 
> MX51EVK U-Boot > set ipaddr 192.168.1.1
> MX51EVK U-Boot > save
> Saving Environment to MMC...
> Writing to MMC(0)... MMC: block number 0x6be604 exceeds max(0x3aa000)
> failed
> 
> I will start debugging it, but just wanted to know if this was
> something already known/reported.

No, I have not (yet) seen. Was the SD card correctly recognized ?

Stefano

-- 
=====================================================================
DENX Software Engineering GmbH,     MD: Wolfgang Denk & Detlev Zundel
HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany
Phone: +49-8142-66989-0 Fax: +49-8142-66989-80  Email: office at denx.de
=====================================================================


More information about the U-Boot mailing list