[U-Boot] Write error on fsl_esdhc driver

Fabio Estevam festevam at gmail.com
Sat May 14 14:54:46 CEST 2011


Hi Stefano,

On Fri, May 13, 2011 at 10:21 AM, Stefano Babic <sbabic at denx.de> wrote:
> On 05/13/2011 02:35 PM, Fabio Estevam wrote:
>> Hi,
>>
> Hi Fbio,
>
>> When trying to save environment variables into a SD card on MX51 and
>> MX53 boards I am getting the following error:
>>
>> MX51EVK U-Boot > set ipaddr 192.168.1.1
>> MX51EVK U-Boot > save
>> Saving Environment to MMC...
>> Writing to MMC(0)... MMC: block number 0x6be604 exceeds max(0x3aa000)
>> failed
>>
>> I will start debugging it, but just wanted to know if this was
>> something already known/reported.
>
> No, I have not (yet) seen. Was the SD card correctly recognized ?

Right after boot I also get the same error:
MMC:   FSL_ESDHC: 0
MMC: block number 0x6be604 exceeds max(0x3aa000)

Regards,

Fabio Estevam


More information about the U-Boot mailing list