[U-Boot] [PATCH 2/5] mx53ard: Configure the pins as GPIOs prior to using gpio_get_value

Fabio Estevam festevam at gmail.com
Tue Nov 15 16:51:30 CET 2011


Configure the pins as GPIO prior to using gpio_get_value.

Signed-off-by: Fabio Estevam <fabio.estevam at freescale.com>
---
 board/freescale/mx53ard/mx53ard.c |    3 +++
 1 files changed, 3 insertions(+), 0 deletions(-)

diff --git a/board/freescale/mx53ard/mx53ard.c b/board/freescale/mx53ard/mx53ard.c
index be32aee..e5a1142 100644
--- a/board/freescale/mx53ard/mx53ard.c
+++ b/board/freescale/mx53ard/mx53ard.c
@@ -87,6 +87,9 @@ int board_mmc_getcd(u8 *cd, struct mmc *mmc)
 {
 	struct fsl_esdhc_cfg *cfg = (struct fsl_esdhc_cfg *)mmc->priv;
 
+	mxc_request_iomux(MX53_PIN_GPIO_1, IOMUX_CONFIG_ALT1);
+	mxc_request_iomux(MX53_PIN_GPIO_4, IOMUX_CONFIG_ALT1);
+
 	if (cfg->esdhc_base == MMC_SDHC1_BASE_ADDR)
 		*cd = gpio_get_value(1); /*GPIO1_1*/
 	else
-- 
1.7.1



More information about the U-Boot mailing list