[U-Boot] [GIT PULL] Pull request u-boot-85xx.git

[Wolfgang Denk]

Dear Kumar Gala,

In message <alpine.LFD.2.00.1111110817050.8953 at right.am.freescale.net> you wrote:
> The following changes since commit 5721385b187b3154c7768e6c182501022f4e2e45:
> 
>   Merge branch 'master' of git://git.denx.de/u-boot-mpc83xx (2011-11-08 07:44:52 +0100)
> 
> are available in the git repository at:
> 
>   git://git.denx.de/u-boot-mpc85xx.git master
> 
> Jerry Huang (2):
>       powerpc/mpc85xx: Set SYSCLK to the required frequency
>       powerpc/85xx: Set max alloc length to 10MB on P1022DS
> 
> Kumar Gala (20):
>       powerpc/85xx: Add support for Book-E MMU Arch v2.0
>       powerpc/85xx: Fix MPC8572DS NAND build
>       powerpc/85xx: Fix NAND SPL support
>       arch/powerpc/cpu/mpc85xx/cpu_init.c: Fix GCC 4.6 build warning
>       arch/powerpc/cpu/mpc85xx/tlb.c: Fix GCC 4.6 build warning
>       arch/powerpc/cpu/mpc8xxx/fsl_lbc.c: Fix GCC 4.6 build warning
>       board/freescale/common/cds_pci_ft.c: Fix GCC 4.6 build warning
>       board/freescale/common/pixis.c: Fix GCC 4.6 build warning
>       board/freescale/mpc8548cds/mpc8548cds.c: Fix GCC 4.6 build warning
>       board/freescale/mpc8568mds/mpc8568mds.c: Fix GCC 4.6 build warning
>       board/freescale/mpc8569mds/mpc8569mds.c: Fix GCC 4.6 build warning
>       board/sbc8548/sbc8548.c: Fix GCC 4.6 build warning
>       board/sbc8560/sbc8560.c: Fix GCC 4.6 build warning
>       drivers/net/fm/fm.c: Fix GCC 4.6 build warning
>       drivers/usb/host/ehci-fsl.c: Fix GCC 4.6 build warning
>       drivers/qe/uec.c: Fix GCC 4.6 build warning
>       arch/powerpc/cpu/mpc8xxx/ddr/options.c: Fix GCC 4.6 build warning
>       arch/powerpc/cpu/mpc85xx/fsl_corenet_serdes.c: Fix GCC 4.6 build warning
>       arch/powerpc/cpu/mpc8xxx/ddr/ctrl_regs.c: Fix GCC 4.6 build warning
>       powerpc/85xx: Fix builds of P1020/P2020RDB-PC_36BIT_NAND
> 
> Poonam Aggrwal (1):
>       fsl_ifc: Fixed a bug in the erratum handling code for IFC_A003399
> 
> Ramneek Mehresh (2):
>       powerpc/85xx: Fix warning for USB device-fixup
>       powerpc/85xx: Make inclusion of USB device fixup conditional
> 
> Roy Zang (1):
>       powerpc/QorIQ: fix network frame manager TBI PHY address settings
> 
> Timur Tabi (5):
>       powerpc/85xx: fix definition of MAS register macros
>       powerpc/85xx: fix some comments in the CCSR relocation code
>       powerpc/85xx: add some missing sync instructions in the CCSR relocation code
>       powerpc/85xx: verify the current address of CCSR before relocating it
>       powerpc/85xx: resize the boot page TLB before relocating CCSR
> 
> Xie Xiaobo (1):
>       phylib: Enable AR8021 phy support
> 
> chenhui zhao (2):
>       powerpc/mpc8548: Add workaround for erratum NMG_eTSEC129
>       powerpc/mpc8548cds: Fix network initialization
> 
>  arch/powerpc/cpu/mpc85xx/cmd_errata.c         |    4 +
>  arch/powerpc/cpu/mpc85xx/cpu_init.c           |    3 +-
>  arch/powerpc/cpu/mpc85xx/cpu_init_early.c     |    4 +-
>  arch/powerpc/cpu/mpc85xx/fsl_corenet_serdes.c |    7 ++-
>  arch/powerpc/cpu/mpc85xx/start.S              |   84 ++++++++++++++++++++++-
>  arch/powerpc/cpu/mpc85xx/tlb.c                |   17 +++--
>  arch/powerpc/cpu/mpc8xxx/ddr/ctrl_regs.c      |    7 +--
>  arch/powerpc/cpu/mpc8xxx/ddr/options.c        |    4 +
>  arch/powerpc/cpu/mpc8xxx/fdt.c                |   24 ++++---
>  arch/powerpc/cpu/mpc8xxx/fsl_lbc.c            |    4 +-
>  arch/powerpc/include/asm/config_mpc85xx.h     |    1 +
>  arch/powerpc/include/asm/mmu.h                |   10 ++--
>  arch/powerpc/include/asm/processor.h          |    6 ++
>  board/freescale/common/cds_pci_ft.c           |    3 +-
>  board/freescale/common/ics307_clk.c           |   69 ++++++++++++++++++
>  board/freescale/common/ics307_clk.h           |    4 +-
>  board/freescale/common/ngpixis.c              |   27 +++++++
>  board/freescale/common/pixis.c                |    4 +-
>  board/freescale/corenet_ds/eth_hydra.c        |    8 --
>  board/freescale/corenet_ds/eth_p4080.c        |    8 --
>  board/freescale/mpc8548cds/mpc8548cds.c       |   69 +++++++++++++++---
>  board/freescale/mpc8568mds/mpc8568mds.c       |    3 +-
>  board/freescale/mpc8569mds/mpc8569mds.c       |    2 -
>  board/freescale/mpc8572ds/tlb.c               |    2 +
>  board/freescale/p1010rdb/p1010rdb.c           |    2 +
>  board/freescale/p1_p2_rdb/p1_p2_rdb.c         |    2 +
>  board/freescale/p1_p2_rdb_pc/law.c            |   10 ++-
>  board/freescale/p1_p2_rdb_pc/p1_p2_rdb_pc.c   |    3 +
>  board/freescale/p2041rdb/eth.c                |    8 --
>  board/sbc8548/sbc8548.c                       |    2 -
>  board/sbc8560/sbc8560.c                       |    3 +-
>  drivers/net/fm/fm.c                           |    3 +-
>  drivers/net/tsec.c                            |   93 +++++++++++++++++++++++++
>  drivers/qe/uec.c                              |    7 --
>  drivers/usb/host/ehci-fsl.c                   |    4 +-
>  include/config_phylib_all_drivers.h           |    1 +
>  include/configs/MPC8536DS.h                   |    2 +-
>  include/configs/MPC8548CDS.h                  |    2 +
>  include/configs/MPC8569MDS.h                  |    2 +-
>  include/configs/MPC8572DS.h                   |    2 +-
>  include/configs/P1022DS.h                     |    2 +-
>  include/configs/P1_P2_RDB.h                   |    2 +-
>  include/configs/p1_p2_rdb_pc.h                |    2 +-
>  43 files changed, 420 insertions(+), 106 deletions(-)

Applied, thanks.

Best regards,

Wolfgang Denk

-- 
DENX Software Engineering GmbH,     MD: Wolfgang Denk & Detlev Zundel
HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany
Phone: (+49)-8142-66989-10 Fax: (+49)-8142-66989-80 Email: wd at denx.de
The only person who always got his work done by Friday
                                                 was Robinson Crusoe.