[U-Boot] [PATCH v3 08/12] OMAP3 SPL: Add identify_nand_chip function
Tom Rini
trini at ti.com
Thu Nov 17 23:36:50 CET 2011
On 11/09/2011 11:25 PM, Heiko Schocher wrote:
> Hello Tom,
>
> Tom Rini wrote:
>> A number of boards are populated with a PoP chip for both DDR and NAND
>> memory. Other boards may simply use this as an easy way to identify
>> board revs. So we provide a function that can be called early to reset
>> the NAND chip and return the result of NAND_CMD_READID. All of this
>> code is put into spl_id_nand.c and controlled via CONFIG_SPL_OMAP3_ID_NAND.
>>
>> Signed-off-by: Tom Rini <trini at ti.com>
>> ---
>> arch/arm/cpu/armv7/omap3/Makefile | 3 +
>> arch/arm/cpu/armv7/omap3/spl_id_nand.c | 83 +++++++++++++++++++++++++++
>> arch/arm/include/asm/arch-omap3/sys_proto.h | 1 +
>> 3 files changed, 87 insertions(+), 0 deletions(-)
>> create mode 100644 arch/arm/cpu/armv7/omap3/spl_id_nand.c
>>
>> diff --git a/arch/arm/cpu/armv7/omap3/spl_id_nand.c b/arch/arm/cpu/armv7/omap3/spl_id_nand.c
>> new file mode 100644
>> index 0000000..edf3ded
>> --- /dev/null
>> +++ b/arch/arm/cpu/armv7/omap3/spl_id_nand.c
>> @@ -0,0 +1,83 @@
> [...]
>> +void identify_nand_chip(int *mfr, int *id)
>> +{
>> + /* Make sure that we have setup GPMC for NAND correctly. */
>> + writel(M_NAND_GPMC_CONFIG1, &gpmc_config->cs[0].config1);
>> + writel(M_NAND_GPMC_CONFIG2, &gpmc_config->cs[0].config2);
>> + writel(M_NAND_GPMC_CONFIG3, &gpmc_config->cs[0].config3);
>> + writel(M_NAND_GPMC_CONFIG4, &gpmc_config->cs[0].config4);
>> + writel(M_NAND_GPMC_CONFIG5, &gpmc_config->cs[0].config5);
>> + writel(M_NAND_GPMC_CONFIG6, &gpmc_config->cs[0].config6);
>> +
>> + /* Enable the GPMC Mapping */
>> + writel((((GPMC_SIZE_128M & 0xF) << 8) | ((NAND_BASE >> 24) & 0x3F) |
> ^ ^ ^
>> + (1 << 6)), &gpmc_config->cs[0].config7);
> ^^^^^^^^
>
> Please substitute this magic values through defines.
OK, I've clarified the original code and then done the same to this code.
--
Tom
More information about the U-Boot
mailing list