[U-Boot] [PATCH v4 06/14] omap3: mem: Add MCFG helper macro
Tom Rini
trini at ti.com
Fri Nov 18 23:48:03 CET 2011
This adds an MCFG macro to calculate the correct value, similar to
the ACTIMA/ACTIMB macros and adds a comment that all of the potential
values here are documented in the TRM. Then we convert the Micron
value to use this macro.
Signed-off-by: Tom Rini <trini at ti.com>
---
arch/arm/include/asm/arch-omap3/mem.h | 46 +++++++++++++++++++++-----------
1 files changed, 30 insertions(+), 16 deletions(-)
diff --git a/arch/arm/include/asm/arch-omap3/mem.h b/arch/arm/include/asm/arch-omap3/mem.h
index abf4e82..12ff3b0 100644
--- a/arch/arm/include/asm/arch-omap3/mem.h
+++ b/arch/arm/include/asm/arch-omap3/mem.h
@@ -39,6 +39,12 @@ enum {
#define EARLY_INIT 1
+/*
+ * For a full explanation of these registers and values please see
+ * the Technical Reference Manual (TRM) for any of the processors in
+ * this family.
+ */
+
/* Slower full frequency range default timings for x32 operation*/
#define SDRC_SHARING 0x00000100
#define SDRC_MR_0_SDR 0x00000031
@@ -86,6 +92,27 @@ enum {
ACTIM_CTRLB_TXP(b) | \
ACTIM_CTRLB_TXSR(d)
+/*
+ * Values used in the MCFG register. Only values we use today
+ * are defined and the rest can be found in the TRM. Unless otherwise
+ * noted all fields are one bit.
+ */
+#define V_MCFG_RAMTYPE_DDR (0x1)
+#define V_MCFG_DEEPPD_EN (0x1 << 3)
+#define V_MCFG_B32NOT16_32 (0x1 << 4)
+#define V_MCFG_BANKALLOCATION_RBC (0x2 << 6) /* 6:7 */
+#define V_MCFG_RAMSIZE(a) ((((a)/(1024*1024))/2) << 8) /* 8:17 */
+#define V_MCFG_ADDRMUXLEGACY_FLEX (0x1 << 19)
+#define V_MCFG_CASWIDTH_10B (0x5 << 20) /* 20:22 */
+#define V_MCFG_RASWIDTH(a) ((a) << 24) /* 24:26 */
+
+/* Macro to construct MCFG */
+#define MCFG(a, b) \
+ V_MCFG_RASWIDTH(b) | V_MCFG_CASWIDTH_10B | \
+ V_MCFG_ADDRMUXLEGACY_FLEX | V_MCFG_RAMSIZE(a) | \
+ V_MCFG_BANKALLOCATION_RBC | \
+ V_MCFG_B32NOT16_32 | V_MCFG_DEEPPD_EN | V_MCFG_RAMTYPE_DDR
+
/* Infineon part of 3430SDP (165MHz optimized) 6.06ns */
#define INFINEON_TDAL_165 6 /* Twr/Tck + Trp/tck */
/* 15/6 + 18/6 = 5.5 -> 6 */
@@ -138,21 +165,8 @@ enum {
ACTIM_CTRLB(MICRON_TWTR_165, MICRON_TCKE_165, \
MICRON_TXP_165, MICRON_XSR_165)
-#define MICRON_RAMTYPE 0x1
-#define MICRON_DDRTYPE 0x0
-#define MICRON_DEEPPD 0x1
-#define MICRON_B32NOT16 0x1
-#define MICRON_BANKALLOCATION 0x2
-#define MICRON_RAMSIZE ((PHYS_SDRAM_1_SIZE/(1024*1024))/2)
-#define MICRON_ADDRMUXLEGACY 0x1
-#define MICRON_CASWIDTH 0x5
-#define MICRON_RASWIDTH 0x2
-#define MICRON_LOCKSTATUS 0x0
-#define MICRON_V_MCFG ((MICRON_LOCKSTATUS << 30) | (MICRON_RASWIDTH << 24) | \
- (MICRON_CASWIDTH << 20) | (MICRON_ADDRMUXLEGACY << 19) | \
- (MICRON_RAMSIZE << 8) | (MICRON_BANKALLOCATION << 6) | \
- (MICRON_B32NOT16 << 4) | (MICRON_DEEPPD << 3) | \
- (MICRON_DDRTYPE << 2) | (MICRON_RAMTYPE))
+#define MICRON_RASWIDTH 0x2
+#define MICRON_V_MCFG(size) MCFG((size), MICRON_RASWIDTH)
#define MICRON_ARCV 2030
#define MICRON_ARE 0x1
@@ -199,7 +213,7 @@ enum {
#ifdef CONFIG_OMAP3_MICRON_DDR
#define V_ACTIMA_165 MICRON_V_ACTIMA_165
#define V_ACTIMB_165 MICRON_V_ACTIMB_165
-#define V_MCFG MICRON_V_MCFG
+#define V_MCFG MICRON_V_MCFG(PHYS_SDRAM_1_SIZE)
#define V_RFR_CTRL MICRON_V_RFR_CTRL
#define V_MR MICRON_V_MR
#endif
--
1.7.0.4
More information about the U-Boot
mailing list