[U-Boot] [PATCH 1/2] efikamx: Configure the pins as GPIOs prior to using gpio_get_value.

[Mike Frysinger]

On Monday 21 November 2011 14:29:50 Marek Vasut wrote:
> > On Monday 21 November 2011 09:20:49 Marek Vasut wrote:
> > > > Configure the pins as GPIOs prior to using gpio_get_value
> > > > 
> > > > +	else {
> > > > +		mxc_request_iomux(MX51_PIN_GPIO1_8, IOMUX_CONFIG_ALT0);
> > > >  		*absent = gpio_get_value(IOMUX_TO_GPIO(MX51_PIN_GPIO1_8));
> > > > -
> > > > +	}
> > > 
> > > NAK. There should be some common function for setting up iomux of those
> > > pins. You souldn't set it in repeatedly called functions.
> > 
> > that's what gpio_request() is for
> 
> I mean in efika.c ... there should be a common place for these iomux
> configurations being done. This is unrelated to gpio ...

not really ... imo, if someone does gpio_request(PIN), the gpio core should 
take care of putting it into GPIO mode.  people shouldn't have to 
pinmux_request(PIN, GPIO_MODE) before doing gpio_request(PIN).
-mike
-------------- next part --------------
A non-text attachment was scrubbed...
Name: not available
Type: application/pgp-signature
Size: 836 bytes
Desc: This is a digitally signed message part.
URL: <http://lists.denx.de/pipermail/u-boot/attachments/20111121/41f9e17e/attachment.pgp>