[U-Boot] Tegra Patches

[Simon Glass]

Hi,

For reference, here is (I believe) the current list of Tegra patches
required become submitting new patches. I note a few conflicts
already, so this will take a little sorting out once the tegra tree is
live.

31b9b64 tegra2: Move board_mmc_init into board files
fbbb238 tegra2: Modify MMC driver to handle power and cd GPIOs
187643e tegra2: Add support for Ventana
7f27b57 tegra2: Use new GPIO APIs in gpio_config_uart()
6b61458 tegra2: Add arch_cpu_init() to fire up Cortex-A9
eda293e tegra2: Simplify tegra_start() boot path
34e9d46 arm: Move CP15 init out of cpu_init_crit()
3e75dfa tegra2: Enable instruction cache
f9c505b tegra2: Remove unneeded boot code
788bfea tegra2: Remove unneeded config option
ad525dc tegra2: Remove unused low-level Tegra2 UART code
29843f0 tegra2: Remove unneeded 'dynamic ram size' message
7c6c3ae tegra2: Don't use board pointer before it is set up
5cc0dad tegra2: Tidy UART selection
845f1c6 tegra2: Add UARTB support
33977b1 tegra2: spi: Add SPI driver for Tegra2 SOC
61d1db1 tegra2: config: Enable SPI flash on Seaboard
57e2005 tegra2: Enable SPI environment on Seaboard
707ae71 tegra2: Implement SPI / UART GPIO switch
024baf8 tegra2: spi: Support SPI / UART switch
930fe9f tegra2: Plumb in SPI/UART switch code
40b415f tegra2: Always build with USE_PRIVATE_LIBGCC=yes.
0ec937a tegra2: Change CONFIG_SYS_TEXT_BASE to 0x00108000.
2936c6b tegra2: Move tegra2_mmc_init() prototype to public header.
d75bb9f tegra2: Add common Avionic Design Tamonten support.
6205647 tegra2: Add Avionic Design Plutux support.
0b526ff (HEAD, denx/us-tegra, us-tegra) tegra2: Add Avionic Design
Medcom support

Regards,
Simon