[U-Boot] Tegra Patches

[Stephen Warren]

On 11/21/2011 04:07 PM, Simon Glass wrote:
> Hi,
> 
> For reference, here is (I believe) the current list of Tegra patches
> required become submitting new patches. I note a few conflicts

s/required become/required in your local branch before your changes/ ?

> already, so this will take a little sorting out once the tegra tree is
> live.

I assume that means we can assume these are all accepted and will be
merged, so we should apply them locally and build on top of them?

Is there a status update for the creation of a Tegra git that we could
fetch and branch from ?

Note that already, I think some of the later patches need rework given
earlier ones, e.g. there was some change to board/nvidia/common/Makefile
that required other boards using it to be updated, but the Ventana
Makefile wasn't IIRC. I guess that's what you meant by conflicts.

Thanks for the list!

> 31b9b64 tegra2: Move board_mmc_init into board files
> fbbb238 tegra2: Modify MMC driver to handle power and cd GPIOs
> 187643e tegra2: Add support for Ventana
> 7f27b57 tegra2: Use new GPIO APIs in gpio_config_uart()
> 6b61458 tegra2: Add arch_cpu_init() to fire up Cortex-A9
> eda293e tegra2: Simplify tegra_start() boot path
> 34e9d46 arm: Move CP15 init out of cpu_init_crit()
> 3e75dfa tegra2: Enable instruction cache
> f9c505b tegra2: Remove unneeded boot code
> 788bfea tegra2: Remove unneeded config option
> ad525dc tegra2: Remove unused low-level Tegra2 UART code
> 29843f0 tegra2: Remove unneeded 'dynamic ram size' message
> 7c6c3ae tegra2: Don't use board pointer before it is set up
> 5cc0dad tegra2: Tidy UART selection
> 845f1c6 tegra2: Add UARTB support
> 33977b1 tegra2: spi: Add SPI driver for Tegra2 SOC
> 61d1db1 tegra2: config: Enable SPI flash on Seaboard
> 57e2005 tegra2: Enable SPI environment on Seaboard
> 707ae71 tegra2: Implement SPI / UART GPIO switch
> 024baf8 tegra2: spi: Support SPI / UART switch
> 930fe9f tegra2: Plumb in SPI/UART switch code
> 40b415f tegra2: Always build with USE_PRIVATE_LIBGCC=yes.
> 0ec937a tegra2: Change CONFIG_SYS_TEXT_BASE to 0x00108000.
> 2936c6b tegra2: Move tegra2_mmc_init() prototype to public header.
> d75bb9f tegra2: Add common Avionic Design Tamonten support.
> 6205647 tegra2: Add Avionic Design Plutux support.
> 0b526ff (HEAD, denx/us-tegra, us-tegra) tegra2: Add Avionic Design
> Medcom support

-- 
nvpublic