[U-Boot] Tegra Patches

[Simon Glass]

Hi Stephen,

On Mon, Nov 21, 2011 at 3:30 PM, Stephen Warren <swarren at nvidia.com> wrote:
> On 11/21/2011 04:07 PM, Simon Glass wrote:
>> Hi,
>>
>> For reference, here is (I believe) the current list of Tegra patches
>> required become submitting new patches. I note a few conflicts
>
> s/required become/required in your local branch before your changes/ ?

s/become/before/

>
>> already, so this will take a little sorting out once the tegra tree is
>> live.
>
> I assume that means we can assume these are all accepted and will be
> merged, so we should apply them locally and build on top of them?
>
> Is there a status update for the creation of a Tegra git that we could
> fetch and branch from ?

Well I could put up a tree, but it's a bit dangerous - the real place
is patchwork.

>
> Note that already, I think some of the later patches need rework given
> earlier ones, e.g. there was some change to board/nvidia/common/Makefile
> that required other boards using it to be updated, but the Ventana
> Makefile wasn't IIRC. I guess that's what you meant by conflicts.

Yes that's right. Hopefully the pain will reduce soon!

>
> Thanks for the list!

You are welcome.

Regards,
Simon

>
>> 31b9b64 tegra2: Move board_mmc_init into board files
>> fbbb238 tegra2: Modify MMC driver to handle power and cd GPIOs
>> 187643e tegra2: Add support for Ventana
>> 7f27b57 tegra2: Use new GPIO APIs in gpio_config_uart()
>> 6b61458 tegra2: Add arch_cpu_init() to fire up Cortex-A9
>> eda293e tegra2: Simplify tegra_start() boot path
>> 34e9d46 arm: Move CP15 init out of cpu_init_crit()
>> 3e75dfa tegra2: Enable instruction cache
>> f9c505b tegra2: Remove unneeded boot code
>> 788bfea tegra2: Remove unneeded config option
>> ad525dc tegra2: Remove unused low-level Tegra2 UART code
>> 29843f0 tegra2: Remove unneeded 'dynamic ram size' message
>> 7c6c3ae tegra2: Don't use board pointer before it is set up
>> 5cc0dad tegra2: Tidy UART selection
>> 845f1c6 tegra2: Add UARTB support
>> 33977b1 tegra2: spi: Add SPI driver for Tegra2 SOC
>> 61d1db1 tegra2: config: Enable SPI flash on Seaboard
>> 57e2005 tegra2: Enable SPI environment on Seaboard
>> 707ae71 tegra2: Implement SPI / UART GPIO switch
>> 024baf8 tegra2: spi: Support SPI / UART switch
>> 930fe9f tegra2: Plumb in SPI/UART switch code
>> 40b415f tegra2: Always build with USE_PRIVATE_LIBGCC=yes.
>> 0ec937a tegra2: Change CONFIG_SYS_TEXT_BASE to 0x00108000.
>> 2936c6b tegra2: Move tegra2_mmc_init() prototype to public header.
>> d75bb9f tegra2: Add common Avionic Design Tamonten support.
>> 6205647 tegra2: Add Avionic Design Plutux support.
>> 0b526ff (HEAD, denx/us-tegra, us-tegra) tegra2: Add Avionic Design
>> Medcom support
>
> --
> nvpublic
>