[U-Boot] [PATCH v2 2/2] omap4_panda: Build in cmd_gpio support on panda

[Joe Hershberger]

Enable the gpio command

Signed-off-by: Joe Hershberger <joe.hershberger at ni.com>
Cc: Joe Hershberger <joe.hershberger at gmail.com>
Cc: Sandeep Paulraj <s-paulraj at ti.com>
---
Changes for v2:
  - Correct a bad merge... sorry.

 board/ti/panda/panda_mux_data.h |    2 +-
 include/configs/omap4_panda.h   |    3 +++
 2 files changed, 4 insertions(+), 1 deletions(-)

diff --git a/board/ti/panda/panda_mux_data.h b/board/ti/panda/panda_mux_data.h
index 63448b6..c692c7b 100644
--- a/board/ti/panda/panda_mux_data.h
+++ b/board/ti/panda/panda_mux_data.h
@@ -212,7 +212,7 @@ const struct pad_conf_entry wkup_padconf_array_non_essential[] = {
 	{PAD0_FREF_SLICER_IN, (M0)},		/* fref_slicer_in */
 	{PAD1_FREF_CLK_IOREQ, (M0)},		/* fref_clk_ioreq */
 	{PAD0_FREF_CLK0_OUT, (M2)},		/* sys_drm_msecure */
-	{PAD1_FREF_CLK3_REQ, M7},					/* safe mode */
+	{PAD1_FREF_CLK3_REQ, M7},		/* safe mode */
 	{PAD0_FREF_CLK3_OUT, (M0)},		/* fref_clk3_out */
 	{PAD1_FREF_CLK4_REQ, (PTU | M3)},	/* led status_1 */
 	{PAD0_FREF_CLK4_OUT, (PTU | M3)},	/* led status_2 */
diff --git a/include/configs/omap4_panda.h b/include/configs/omap4_panda.h
index 67da70e..b88e5ad 100644
--- a/include/configs/omap4_panda.h
+++ b/include/configs/omap4_panda.h
@@ -35,6 +35,9 @@
 
 #include <configs/omap4_common.h>
 
+/* GPIO */
+#define CONFIG_CMD_GPIO 1
+
 /* ENV related config options */
 #define CONFIG_ENV_IS_NOWHERE
 
-- 
1.6.0.2