[U-Boot] [PATCH] I2C: Fix mxc_i2c.c problem on phycore pcm037
Marek Vasut
marek.vasut at gmail.com
Tue Oct 25 14:09:11 CEST 2011
The problem was caused by a global variable being used early in the boot
process.
This patch also contains the multibyte address swapping fix by:
Anatolij Gustschin <agust at denx.de>
Signed-off-by: Marek Vasut <marek.vasut at gmail.com>
Cc: Anatolij Gustschin <agust at denx.de>
Cc: Wolfgang Denk <wd at denx.de>
Cc: Albert ARIBAUD <albert.u.boot at aribaud.net>
Cc: Heiko Schocher <hs at denx.de>
Cc: Stefano Babic <sbabic at denx.de>
---
drivers/i2c/mxc_i2c.c | 29 ++++++++++++++++-------------
1 files changed, 16 insertions(+), 13 deletions(-)
diff --git a/drivers/i2c/mxc_i2c.c b/drivers/i2c/mxc_i2c.c
index a805bf6..360c54c 100644
--- a/drivers/i2c/mxc_i2c.c
+++ b/drivers/i2c/mxc_i2c.c
@@ -37,6 +37,7 @@
#include <asm/arch/clock.h>
#include <asm/arch/imx-regs.h>
+#include <i2c.h>
struct mxc_i2c_regs {
uint32_t iadr;
@@ -95,14 +96,11 @@ static u16 i2c_clk_div[50][2] = {
{ 3072, 0x1E }, { 3840, 0x1F }
};
-static u8 clk_idx;
-
/*
* Calculate and set proper clock divider
*/
-static void i2c_imx_set_clk(unsigned int rate)
+static uint8_t i2c_imx_get_clk(unsigned int rate)
{
- struct mxc_i2c_regs *i2c_regs = (struct mxc_i2c_regs *)I2C_BASE;
unsigned int i2c_clk_rate;
unsigned int div;
int i;
@@ -127,9 +125,7 @@ static void i2c_imx_set_clk(unsigned int rate)
for (i = 0; i2c_clk_div[i][0] < div; i++)
;
- /* Store divider value */
- clk_idx = i2c_clk_div[i][1];
- writeb(clk_idx, &i2c_regs->ifdr);
+ return i2c_clk_div[i][1];
}
/*
@@ -148,7 +144,12 @@ void i2c_reset(void)
*/
void i2c_init(int speed, int unused)
{
- i2c_imx_set_clk(speed);
+ struct mxc_i2c_regs *i2c_regs = (struct mxc_i2c_regs *)I2C_BASE;
+ u8 idx = i2c_imx_get_clk(speed);
+
+ /* Store divider value */
+ writeb(idx, &i2c_regs->ifdr);
+
i2c_reset();
}
@@ -217,8 +218,11 @@ int i2c_imx_start(void)
struct mxc_i2c_regs *i2c_regs = (struct mxc_i2c_regs *)I2C_BASE;
unsigned int temp = 0;
int result;
+ int speed = i2c_get_bus_speed();
+ u8 idx = i2c_imx_get_clk(speed);
- writeb(clk_idx, &i2c_regs->ifdr);
+ /* Store divider value */
+ writeb(idx, &i2c_regs->ifdr);
/* Enable I2C controller */
writeb(0, &i2c_regs->i2sr);
@@ -291,11 +295,10 @@ int i2c_imx_set_chip_addr(uchar chip, int read)
int i2c_imx_set_reg_addr(uint addr, int alen)
{
struct mxc_i2c_regs *i2c_regs = (struct mxc_i2c_regs *)I2C_BASE;
- int ret;
- int i;
+ int ret = 0;
- for (i = 0; i < (8 * alen); i += 8) {
- writeb((addr >> i) & 0xff, &i2c_regs->i2dr);
+ while (alen--) {
+ writeb((addr >> (alen * 8)) & 0xff, &i2c_regs->i2dr);
ret = i2c_imx_trx_complete();
if (ret)
--
1.7.6.3
More information about the U-Boot
mailing list