[U-Boot] [PATCH v11 3/9] nds32/core N1213: NDS32 N12 core family N1213
Macpaul Lin
macpaul at andestech.com
Thu Sep 1 07:52:44 CEST 2011
Add N1213 cpu core (N12 Core family) support for NDS32 arch.
This patch includes start.S for the initialize procedure of N1213.
NDS32 Core N1213 has the following hardware features.
Core:
- 16-/32-bit mixable instruction format
- 32 general-purpose 32-bit registers
- 8-stage pipeline
- Dynamic branch prediction
- 32/64/128/256 BTB
- Return address stack (RAS)
- Vector interrupts for internal/external
- 3 HW-level nested interruptions
- User and super-user mode support
- Memory-mapped I/O
- Address space up to 4GB
Memory Management Unit:
- TLB
- Optional hardware page table walker
- Two groups of page size support
Memory Subsystem:
- I & D cache
- I & D local memory (LM)
Bus Interface:
- Synchronous/Asynchronous AHB bus: 0, 1 or 2 ports
Start procedure:
start.S will start up the N1213 CPU core at first,
then jump to SoC dependent "lowlevel_init.S" and
"watchdog.S" to configure peripheral devices.
Signed-off-by: Macpaul Lin <macpaul at andestech.com>
---
Changes v1 to v6:
- Style clean up and reorganize code
Changes v7-v9:
- No Change.
Changes v10:
- start.S of N1213 CPU has been rewrote for relocation support.
- u-boot.lds:
- Add got and *(.got.plt) section for support GCC 4 toolchain
- Modified for relocation implementation.
Changes v11:
- arch/nds32/cpu/n1213/Makefile
- replace $(AR) $(call cmd_link_o_target,...)
arch/nds32/cpu/n1213/Makefile | 50 ++++
arch/nds32/cpu/n1213/start.S | 523 +++++++++++++++++++++++++++++++++++++++
arch/nds32/cpu/n1213/u-boot.lds | 72 ++++++
3 files changed, 645 insertions(+), 0 deletions(-)
create mode 100644 arch/nds32/cpu/n1213/Makefile
create mode 100644 arch/nds32/cpu/n1213/start.S
create mode 100644 arch/nds32/cpu/n1213/u-boot.lds
diff --git a/arch/nds32/cpu/n1213/Makefile b/arch/nds32/cpu/n1213/Makefile
new file mode 100644
index 0000000..da15574
--- /dev/null
+++ b/arch/nds32/cpu/n1213/Makefile
@@ -0,0 +1,50 @@
+#
+# (C) Copyright 2000-2006
+# Wolfgang Denk, DENX Software Engineering, wd at denx.de.
+#
+# Copyright (C) 2011 Andes Technology Corporation
+# Shawn Lin, Andes Technology Corporation <nobuhiro at andestech.com>
+# Macpaul Lin, Andes Technology Corporation <macpaul at andestech.com>
+#
+# See file CREDITS for list of people who contributed to this
+# project.
+#
+# This program is free software; you can redistribute it and/or
+# modify it under the terms of the GNU General Public License as
+# published by the Free Software Foundation; either version 2 of
+# the License, or (at your option) any later version.
+#
+# This program is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+# GNU General Public License for more details.
+#
+# You should have received a copy of the GNU General Public License
+# along with this program; if not, write to the Free Software
+# Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+# MA 02111-1307 USA
+#
+
+include $(TOPDIR)/config.mk
+
+LIB = $(obj)lib$(CPU).o
+
+START = start.o
+
+SRCS := $(START:.o=.S) $(SOBJS:.o=.S) $(COBJS:.o=.c)
+OBJS := $(addprefix $(obj),$(COBJS) $(SOBJS))
+START := $(addprefix $(obj),$(START))
+
+all: $(obj).depend $(START) $(LIB)
+
+$(LIB): $(OBJS)
+ $(call cmd_link_o_target, $(OBJS))
+
+#########################################################################
+
+# defines $(obj).depend target
+include $(SRCTREE)/rules.mk
+
+sinclude $(obj).depend
+
+#########################################################################
diff --git a/arch/nds32/cpu/n1213/start.S b/arch/nds32/cpu/n1213/start.S
new file mode 100644
index 0000000..602067e
--- /dev/null
+++ b/arch/nds32/cpu/n1213/start.S
@@ -0,0 +1,523 @@
+/*
+ * Andesboot - Startup Code for Whitiger core
+ *
+ * Copyright (C) 2006 Andes Technology Corporation
+ * Copyright (C) 2006 Shawn Lin <nobuhiro at andestech.com>
+ * Copyright (C) 2011 Macpaul <macpaul at andestech.com>
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+#include <asm-offsets.h>
+#include <config.h>
+#include <common.h>
+#include <asm/macro.h>
+#include <version.h>
+
+/*
+ * Jump vector table for EVIC mode
+ */
+#define ENA_DCAC 2UL
+#define DIS_DCAC ~ENA_DCAC
+#define ICAC_MEM_KBF_ISET (0x07) ! I Cache sets per way
+#define ICAC_MEM_KBF_IWAY (0x07<<3) ! I cache ways
+#define ICAC_MEM_KBF_ISZ (0x07<<6) ! I cache line size
+#define DCAC_MEM_KBF_DSET (0x07) ! D Cache sets per way
+#define DCAC_MEM_KBF_DWAY (0x07<<3) ! D cache ways
+#define DCAC_MEM_KBF_DSZ (0x07<<6) ! D cache line size
+
+#define PSW $ir0
+#define EIT_INTR_PSW $ir1 ! interruption $PSW
+#define EIT_PREV_IPSW $ir2 ! previous $IPSW
+#define EIT_IVB $ir3 ! intr vector base address
+#define EIT_EVA $ir4 ! MMU related Exception Virtual Address register
+#define EIT_PREV_EVA $ir5 ! previous $eva
+#define EIT_ITYPE $ir6 ! interruption type
+#define EIT_PREV_ITYPE $ir7 ! prev intr type
+#define EIT_MACH_ERR $ir8 ! machine error log
+#define EIT_INTR_PC $ir9 ! Interruption PC
+#define EIT_PREV_IPC $ir10 ! previous $IPC
+#define EIT_OVL_INTR_PC $ir11 ! overflow interruption PC
+#define EIT_PREV_P0 $ir12 ! prev $P0
+#define EIT_PREV_P1 $ir13 ! prev $p1
+#define CR_ICAC_MEM $cr1 ! I-cache/memory config reg
+#define CR_DCAC_MEM $cr2 ! D-cache/memory config reg
+#define MR_CAC_CTL $mr8
+
+.globl _start
+
+_start: b reset
+ b tlb_fill
+ b tlb_not_present
+ b tlb_misc
+ b tlb_vlpt_miss
+ b cache_parity_error
+ b debug
+ b general_exception
+ b internal_interrupt ! H0I
+ b internal_interrupt ! H1I
+ b internal_interrupt ! H2I
+ b internal_interrupt ! H3I
+ b internal_interrupt ! H4I
+ b internal_interrupt ! H5I
+
+ .balign 16
+
+/*
+ * Andesboot Startup Code (reset vector)
+ *
+ * 1. bootstrap
+ * 1.1 reset - start of Andesboot
+ * 1.2 to superuser mode - as is when reset
+ * 1.4 Do lowlevel_init
+ * - (this will jump out to lowlevel_init.S in SoC)
+ * - (lowlevel_init)
+ * 1.3 Turn off watchdog timer
+ * - (this will jump out to watchdog.S in SoC)
+ * - (turnoff_watchdog)
+ * 2. Do critical init when reboot (not from mem)
+ * 3. Relocate andesboot to ram
+ * 4. Setup stack
+ * 5. Jump to second stage (start_andesboot)
+ */
+
+/* Note: TEXT_BASE is defined by the (board-dependent) linker script */
+.globl _TEXT_BASE
+_TEXT_BASE:
+ .word CONFIG_SYS_TEXT_BASE
+
+/*
+ * These are defined in the board-specific linker script.
+ * Subtracting _start from them lets the linker put their
+ * relative position in the executable instead of leaving
+ * them null.
+ */
+.globl _bss_start_ofs
+_bss_start_ofs:
+ .word __bss_start - _start
+
+.globl _bss_end_ofs
+_bss_end_ofs:
+ .word __bss_end__ - _start
+
+.globl _end_ofs
+_end_ofs:
+ .word _end - _start
+
+#ifdef CONFIG_USE_IRQ
+/* IRQ stack memory (calculated at run-time) */
+.globl IRQ_STACK_START
+IRQ_STACK_START:
+ .word 0x0badc0de
+
+/* IRQ stack memory (calculated at run-time) */
+.globl FIQ_STACK_START
+FIQ_STACK_START:
+ .word 0x0badc0de
+#endif
+
+/* IRQ stack memory (calculated at run-time) + 8 bytes */
+.globl IRQ_STACK_START_IN
+IRQ_STACK_START_IN:
+ .word 0x0badc0de
+
+/*
+ * The bootstrap code of nds32 core
+ */
+
+reset:
+
+load_lli:
+#ifndef CONFIG_SKIP_LOWLEVEL_INIT
+ jal load_lowlevel_init
+ jral $p0
+#endif
+
+/*
+ * Set the N1213 (Whitiger) core to superuser mode
+ * According to spec, it is already when reset
+ */
+turnoff_wtdog:
+#ifndef CONFIG_SKIP_TRUNOFF_WATCHDOG
+ jal load_turnoff_watchdog
+ jral $p0
+#endif
+
+/*
+ * Do CPU critical regs init only at reboot,
+ * not when booting from ram
+ */
+#ifdef CONFIG_INIT_CRITICAL
+ bal cpu_init_crit ! Do CPU critical regs init
+#endif
+
+/*
+ * Set stackpointer in internal RAM to call board_init_f
+ * $sp must be 8-byte alignment for ABI compliance.
+ */
+call_board_init_f:
+ li $sp, CONFIG_SYS_INIT_SP_ADDR
+ li $r0, 0x00000000
+
+#ifdef __PIC__
+#ifdef __NDS32_N1213_43U1H__
+/* __NDS32_N1213_43U1H__ implies NDS32 V0 ISA */
+ la $r15, board_init_f ! store function address into $r15
+#endif
+#endif
+ j board_init_f ! jump to board_init_f() in lib/board.c
+
+/*
+ * void relocate_code (addr_sp, gd, addr_moni)
+ *
+ * This "function" does not return, instead it continues in RAM
+ * after relocating the monitor code.
+ *
+ */
+.globl relocate_code
+relocate_code:
+ move $r4, $r0 /* save addr_sp */
+ move $r5, $r1 /* save addr of gd */
+ move $r6, $r2 /* save addr of destination */
+
+/* Set up the stack */
+stack_setup:
+ move $sp, $r4
+
+ la $r0, _start
+
+ beq $r0, $r6, clear_bss /* skip relocation */
+
+ move $r1, $r6 /* r1 <- scratch for copy_loop */
+ l.w $r3, _bss_start_ofs
+ add $r2, $r0, $r3 /* r2 <- source end address */
+
+copy_loop:
+ lwi.p $r7, [$r0], #4
+ swi.p $r7, [$r1], #4
+ blt $r0, $r2, copy_loop
+
+/*
+ * fix relocations related issues
+ */
+fix_relocations:
+ l.w $r0, _TEXT_BASE /* r0 <- Text base */
+ sub $r9, $r6, $r0 /* r9 <- relocation offset */
+
+fix_got:
+/*
+ * Now we want to update GOT.
+ *
+ * GOT[0] is reserved. GOT[1] is also reserved for the dynamic object
+ * generated by GNU ld. Skip these reserved entries from relocation.
+ */
+ l.w $r2, _rel_got_start_ofs /* r2 <- rel got start ofs */
+ add $r2, $r2, $r0 /* r2 <- rel got start in FLASH */
+ add $r2, $r2, $r9 /* r2 <- rel got start in RAM */
+ l.w $r3, _rel_got_end_ofs /* r3 <- rel got end ofs */
+ add $r3, $r3, $r0 /* r3 <- rel got end in FLASH */
+ add $r3, $r3, $r9 /* r3 <- rel got end in RAM */
+ addi $r2, $r2, #8 /* skipping first two entries */
+fix_got_loop:
+ lwi $r0, [$r2] /* r0 <- location in FLASH to fix up */
+ add $r0, $r0, $r9 /* r0 <- location fix up to RAM */
+ swi.p $r0, [$r2], #4 /* r0 <- store fix into .got in RAM */
+ blt $r2, $r3, fix_got_loop
+
+clear_bss:
+ l.w $r0, _bss_start_ofs
+ l.w $r1, _bss_end_ofs
+ move $r4, $r6 /* reloc addr */
+ add $r0, $r0, $r4
+ add $r1, $r1, $r4
+ li $r2, 0x00000000 /* clear */
+
+clbss_l:
+ sw $r2, [$r0] /* clear loop... */
+ addi $r0, $r0, #4
+ bne $r0, $r1, clbss_l
+
+/*
+ * We are done. Do not return, instead branch to second part of board
+ * initialization, now running from RAM.
+ */
+call_board_init_r:
+ l.w $r0, _board_init_r_ofs
+ la $r1, _start
+ add $lp, $r0, $r1 /* offset of board_init_f() */
+ add $lp, $lp, $r9 /* real address of board_init_f() */
+ /* setup parameters for board_init_r */
+ move $r0, $r5 /* gd_t */
+ move $r1, $r6 /* dest_addr */
+
+#ifdef __PIC__
+#ifdef __NDS32_N1213_43U1H__ /* NDS32 V0 ISA */
+ move $r15, $lp /* store function address into $r15 */
+#endif
+#endif
+
+ /* jump to it ... */
+ jr $lp /* jump to board_init_r() */
+
+_board_init_r_ofs:
+ .word board_init_r - _start
+_rel_got_start_ofs:
+ .word __got_start - _start
+_rel_got_end_ofs:
+ .word __got_end - _start
+
+/*
+ * Initialize CPU critical registers
+ *
+ * 1. Setup control registers
+ * 1.1 Mask all IRQs
+ * 1.2 Flush cache and TLB
+ * 1.3 Disable MMU and cache
+ * 2. Setup memory timing
+ */
+
+cpu_init_crit:
+
+ move $r0, $lp /* push ra */
+
+ /* Disable Interrupts by clear GIE in $PSW reg */
+ setgie.d
+
+ /* Flush caches and TLB */
+ /* Invalidate caches */
+ bal invalidate_icac
+ bal invalidate_dcac
+
+ /* Flush TLB */
+ mfsr $p0, $MMU_CFG
+ andi $p0, $p0, 0x3 ! MMPS
+ li $p1, 0x2 ! TLB MMU
+ bne $p0, $p1, 1f
+ tlbop flushall ! Flush TLB
+
+1:
+ ! Disable MMU, Dcache
+ ! Whitiger is MMU disabled when reset
+ ! Disable the D$
+ mfsr $p0, MR_CAC_CTL ! Get the $CACHE_CTL reg
+ li $p1, DIS_DCAC
+ and $p0, $p0, $p1 ! Set DC_EN bit
+ mtsr $p0, MR_CAC_CTL ! write back the $CACHE_CTL reg
+ isb
+
+ move $lp, $r0
+2:
+ ret
+
+#ifndef CONFIG_SKIP_LOWLEVEL_INIT
+load_lowlevel_init:
+ la $r6, lowlevel_init
+ la $r7, load_lli + 4
+ sub $p0, $r6, $r7
+ add $p0, $p0, $lp
+ret
+#endif
+
+#ifndef CONFIG_SKIP_TRUNOFF_WATCHDOG
+load_turnoff_watchdog:
+ la $r6, turnoff_watchdog
+ la $r7, turnoff_wtdog + 4
+ sub $p0, $r6, $r7
+ add $p0, $p0, $lp
+ret
+#endif
+
+/*
+ * Invalidate I$
+ */
+invalidate_icac:
+ mfsr $t0, CR_ICAC_MEM ! read $cr1(I CAC/MEM cfg. reg.) configuration
+ andi $p0, $t0, ICAC_MEM_KBF_ISZ ! Get the ISZ field
+ beqz $p0, end_flush_icache ! if $p0=0, then no I CAC existed
+ srli $p0, $p0, 6 ! get $p0 the index of I$ block
+ addi $t1, $p0, 2 ! $t1= bit width of I cache line size(ISZ)
+ li $t4, 1
+ sll $t5, $t4, $t1 ! get $t5 cache line size
+ andi $p1, $t0, ICAC_MEM_KBF_ISET ! get the ISET field
+ addi $t2, $p1, 6 ! $t2= bit width of ISET
+ andi $p1, $t0, ICAC_MEM_KBF_IWAY ! get bitfield of Iway
+ srli $p1, $p1, 3
+ addi $p1, $p1, 1 ! then $p1 is I way number
+ add $t3, $t2, $t1 ! SHIFT
+ sll $p1, $p1, $t3 ! GET the total cache size
+ICAC_LOOP:
+ sub $p1, $p1, $t5
+ cctl $p1, L1I_IX_INVAL
+ bnez $p1, ICAC_LOOP
+end_flush_icache:
+ ret
+
+/*
+ * Invalidate D$
+ */
+invalidate_dcac:
+ mfsr $t0, CR_DCAC_MEM ! read $cr2(D CAC/MEM cfg. reg.) configuration
+ andi $p0, $t0, DCAC_MEM_KBF_DSZ ! Get the DSZ field
+ beqz $p0, end_flush_dcache ! if $p0=0, then no D CAC existed
+ srli $p0, $p0, 6 ! get $p0 the index of D$ block
+ addi $t1, $p0, 2 ! $t1= bit width of D cache line size(DSZ)
+ li $t4, 1
+ sll $t5, $t4, $t1 ! get $t5 cache line size
+ andi $p1, $t0, DCAC_MEM_KBF_DSET ! get the DSET field
+ addi $t2, $p1, 6 ! $t2= bit width of DSET
+ andi $p1, $t0, DCAC_MEM_KBF_DWAY ! get bitfield of D way
+ srli $p1, $p1, 3
+ addi $p1, $p1, 1 ! then $p1 is D way number
+ add $t3, $t2, $t1 ! SHIFT
+ sll $p1, $p1, $t3 ! GET the total cache size
+DCAC_LOOP:
+ sub $p1, $p1, $t5
+ cctl $p1, L1D_IX_INVAL
+ bnez $p1, DCAC_LOOP
+end_flush_dcache:
+ ret
+
+/*
+ * Interrupt handling
+ */
+
+/*
+ * exception handlers
+ */
+ .align 5
+
+.macro SAVE_ALL
+ ! FIXME: Other way to get PC?
+ ! FIXME: Update according to the newest spec!!
+1:
+ la $r28, 1
+ push $r28
+ mfsr $r28, PSW ! $PSW
+ push $r28
+ mfsr $r28, EIT_EVA ! $ir1 $EVA
+ push $r28
+ mfsr $r28, EIT_ITYPE ! $ir2 $ITYPE
+ push $r28
+ mfsr $r28, EIT_MACH_ERR ! $ir3 Mach Error
+ push $r28
+ mfsr $r28, EIT_INTR_PSW ! $ir5 $IPSW
+ push $r28
+ mfsr $r28, EIT_PREV_IPSW ! $ir6 prev $IPSW
+ push $r28
+ mfsr $r28, EIT_PREV_EVA ! $ir7 prev $EVA
+ push $r28
+ mfsr $r28, EIT_PREV_ITYPE ! $ir8 prev $ITYPE
+ push $r28
+ mfsr $r28, EIT_INTR_PC ! $ir9 Interruption PC
+ push $r28
+ mfsr $r28, EIT_PREV_IPC ! $ir10 prev INTR_PC
+ push $r28
+ mfsr $r28, EIT_OVL_INTR_PC ! $ir11 Overflowed INTR_PC
+ push $r28
+ mfusr $r28, $d1.lo
+ push $r28
+ mfusr $r28, $d1.hi
+ push $r28
+ mfusr $r28, $d0.lo
+ push $r28
+ mfusr $r28, $d0.hi
+ push $r28
+ pushm $r0, $r30 ! store $sp-$r31, ra-$r30, $gp-$r29, $r28-$fp
+ addi $sp, $sp, -4 ! make room for implicit pt_regs parameters
+.endm
+
+ .align 5
+tlb_fill:
+ SAVE_ALL
+ move $r0, $sp ! To get the kernel stack
+ li $r1, 1 ! Determine interruption type
+ bal do_interruption
+
+ .align 5
+tlb_not_present:
+ SAVE_ALL
+ move $r0, $sp ! To get the kernel stack
+ li $r1, 2 ! Determine interruption type
+ bal do_interruption
+
+ .align 5
+tlb_misc:
+ SAVE_ALL
+ move $r0, $sp ! To get the kernel stack
+ li $r1, 3 ! Determine interruption type
+ bal do_interruption
+
+ .align 5
+tlb_vlpt_miss:
+ SAVE_ALL
+ move $r0, $sp ! To get the kernel stack
+ li $r1, 4 ! Determine interruption type
+ bal do_interruption
+
+ .align 5
+cache_parity_error:
+ SAVE_ALL
+ move $r0, $sp ! To get the kernel stack
+ li $r1, 5 ! Determine interruption type
+ bal do_interruption
+
+ .align 5
+debug:
+ SAVE_ALL
+ move $r0, $sp ! To get the kernel stack
+ li $r1, 6 ! Determine interruption type
+ bal do_interruption
+
+ .align 5
+general_exception:
+ SAVE_ALL
+ move $r0, $sp ! To get the kernel stack
+ li $r1, 7 ! Determine interruption type
+ bal do_interruption
+
+ .align 5
+internal_interrupt:
+ SAVE_ALL
+ move $r0, $sp ! To get the kernel stack
+ li $r1, 8 ! Determine interruption type
+ bal do_interruption
+
+ .align 5
+
+/*
+ * void reset_cpu(ulong addr);
+ * $r0: input address to jump to
+ */
+.globl reset_cpu
+reset_cpu:
+/* No need to disable MMU because we never enable it */
+
+ bal invalidate_icac
+ bal invalidate_dcac
+ mfsr $p0, $MMU_CFG
+ andi $p0, $p0, 0x3 ! MMPS
+ li $p1, 0x2 ! TLB MMU
+ bne $p0, $p1, 1f
+ tlbop flushall ! Flush TLB
+1:
+ mfsr $p0, MR_CAC_CTL ! Get the $CACHE_CTL reg
+ li $p1, DIS_DCAC
+ and $p0, $p0, $p1 ! Clear the DC_EN bit
+ mtsr $p0, MR_CAC_CTL ! Write back the $CACHE_CTL reg
+ br $r0 ! Jump to the input address
diff --git a/arch/nds32/cpu/n1213/u-boot.lds b/arch/nds32/cpu/n1213/u-boot.lds
new file mode 100644
index 0000000..194f45a
--- /dev/null
+++ b/arch/nds32/cpu/n1213/u-boot.lds
@@ -0,0 +1,72 @@
+/*
+ * (C) Copyright 2000
+ * Wolfgang Denk, DENX Software Engineering, wd at denx.de.
+ *
+ * Copyright (C) 2011 Andes Technology Corporation
+ * Shawn Lin, Andes Technology Corporation <nobuhiro at andestech.com>
+ * Macpaul Lin, Andes Technology Corporation <macpaul at andestech.com>
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+OUTPUT_FORMAT("elf32-nds32", "elf32-nds32", "elf32-nds32")
+OUTPUT_ARCH(nds32)
+ENTRY(_start)
+SECTIONS
+{
+ . = 0x00000000;
+
+ . = ALIGN(4);
+ .text :
+ {
+ arch/nds32/cpu/n1213/start.o (.text)
+ *(.text)
+ }
+
+ . = ALIGN(4);
+ .rodata : { *(SORT_BY_ALIGNMENT(SORT_BY_NAME(.rodata*))) }
+
+ . = ALIGN(4);
+ .data : { *(.data) }
+
+ . = ALIGN(4);
+
+ .got : {
+ __got_start = .;
+ *(.got.plt) *(.got)
+ __got_end = .;
+ }
+
+ . = .;
+ __u_boot_cmd_start = .;
+ .u_boot_cmd : { *(.u_boot_cmd) }
+ __u_boot_cmd_end = .;
+
+ . = ALIGN(4);
+
+ _end = .;
+
+ .bss : {
+ __bss_start = .;
+ *(.bss)
+ . = ALIGN(4);
+ __bss_end__ = .;
+ }
+
+}
--
1.7.3.5
More information about the U-Boot
mailing list