September 2011 Archives by subject
Starting: Thu Sep 1 00:02:40 CEST 2011
Ending: Fri Sep 30 23:52:49 CEST 2011
Messages: 2908
- [U-Boot] "nand write.yaffs" is not working as expected
Peter Pan
- [U-Boot] "nand write.yaffs" is not working as expected
Lei Wen
- [U-Boot] (no subject)
Coca-Cola Great Britain
- [U-Boot] (no subject)
Wen Lee
- [U-Boot] (no subject)
UK INTERNATIONAL LOTTERY
- [U-Boot] (no subject)
Elo Petteri
- [U-Boot] (no subject)
Mr.Wen Lee
- [U-Boot] (no subject)
Mr. Song Lile Transfer Offer 2011
- [U-Boot] (no subject)
IRISH LOTTERY
- [U-Boot] (no subject)
Mr. Abdulrahman Ibrahim
- [U-Boot] ***(ANDRE MOORE ESQ)CONGRATULATES YOU ON YOUR WON PRIZE***
BRITISH COLUMBIA LOTTERY 2011 PROMOTION
- [U-Boot] ***(ANDRE MOORE ESQ)CONGRATULATES YOU ON YOUR WON PRIZE***
BRITISH COLUMBIA LOTTERY 2011 PROMOTION.
- [U-Boot] [2011.09-rc2] Fix for compile error with gcc3
rhabarber1848
- [U-Boot] [2011.09-rc2] Fix for compile error with gcc3
Scott McNutt
- [U-Boot] [2011.09-rc2] Fix for compile error with gcc3
Marek Vasut
- [U-Boot] [Example 3/3] fastboot: add board specific implementation
Wolfgang Denk
- [U-Boot] [Example 3/3] fastboot: add board specific implementation
Sebastian Andrzej Siewior
- [U-Boot] [Example v2 3/3] fastboot: add board specific implementation
Sebastian Andrzej Siewior
- [U-Boot] [GIT PULL] MIPS patche
Shinya Kuribayashi
- [U-Boot] [GIT PULL] MIPS patche
Wolfgang Denk
- [U-Boot] [GIT PULL] Pull request: u-boot-imx
Stefano Babic
- [U-Boot] [GIT PULL] Pull request: u-boot-imx
Albert ARIBAUD
- [U-Boot] [HELP] coldfire, bss.variable offset greater than __bss_end
Angelo Dureghello
- [U-Boot] [HELP] coldfire, bss.variable offset greater than __bss_end
Angelo Dureghello
- [U-Boot] [MPC8379E-rdb] Question about master bus busy after enabling I2C.
shawn Bai
- [U-Boot] [MPC8379E-rdb] Question about master bus busy after enabling I2C.
Heiko Schocher
- [U-Boot] [MPC8379E-rdb] Question about master bus busy after enabling I2C.
shawn Bai
- [U-Boot] [PATCH 0/2] Add EfikaSB support
Marek Vasut
- [U-Boot] [PATCH 0/2] arm, davinci: add rtc support
Heiko Schocher
- [U-Boot] [PATCH 0/2] board revision related patches for dm646x
nagabhushana.netagunte at ti.com
- [U-Boot] [PATCH 0/2] devkit8000: add spl mmc boot
Simon Schwarz
- [U-Boot] [PATCH 0/2] implement set individual variables to default
Gerlando Falauto
- [U-Boot] [PATCH 0/2] misc:max8998 Support for MAX8998 PMIC driver
Stefano Babic
- [U-Boot] [PATCH 0/2] misc:max8998 Support for MAX8998 PMIC driver
Lukasz Majewski
- [U-Boot] [PATCH 0/2] misc:max8998 Support for MAX8998 PMIC driver
Wolfgang Denk
- [U-Boot] [PATCH 0/2] misc:max8998 Support for MAX8998 PMIC driver
Lukasz Majewski
- [U-Boot] [PATCH 0/2] misc:max8998 Support for MAX8998 PMIC driver
Stefano Babic
- [U-Boot] [PATCH 0/2] misc:max8998 Support for MAX8998 PMIC driver
Lukasz Majewski
- [U-Boot] [PATCH 0/2] mpc85xx: support for Freescale COM Express P2020
Ira W. Snyder
- [U-Boot] [PATCH 0/2] phylib: a couple of minor fixes in generic phy library
Vladimir Zapolskiy
- [U-Boot] [PATCH 0/2] powerpc, mpc83xx: mpc83xx.h cleanup and enhancement
Heiko Schocher
- [U-Boot] [PATCH 0/2] SPL improvements
Marek Vasut
- [U-Boot] [PATCH 0/2] SPL improvements
Marek Vasut
- [U-Boot] [PATCH 0/2] SPL improvements
Marek Vasut
- [U-Boot] [PATCH 0/2] SPL improvements
Marek Vasut
- [U-Boot] [PATCH 0/2] SPL: omap4: Fix boot crash in HS devices.
sricharan
- [U-Boot] [PATCH 0/3] Add secure boot support on P4080/P3041/P5020 & P1010 boards.
Ruchika Gupta
- [U-Boot] [PATCH 0/3] arm, davinci: add wdt support
Heiko Schocher
- [U-Boot] [PATCH 0/3] fix: regression in SMDK6400
Simon Schwarz
- [U-Boot] [PATCH 0/3] fix: regression in SMDK6400
Scott Wood
- [U-Boot] [PATCH 0/3] misc:pmic: New PMIC generic driver
Lukasz Majewski
- [U-Boot] [PATCH 0/3] misc:pmic: New PMIC generic driver
Stefano Babic
- [U-Boot] [PATCH 0/3] misc:pmic: New PMIC generic driver
Lukasz Majewski
- [U-Boot] [PATCH 0/3] omap4: changes for 4460 ES1.1
Ricardo Salveti de Araujo
- [U-Boot] [PATCH 0/3] omap: gpio: Use generic API (instead of custom)
Sanjeev Premi
- [U-Boot] [PATCH 0/3] omap: gpio: Use generic API (instead of custom)
Paulraj, Sandeep
- [U-Boot] [PATCH 0/3] omap: gpio: Use generic API (instead of custom)
Luca Ceresoli
- [U-Boot] [PATCH 0/3] omap: gpio: Use generic API (instead of custom)
Premi, Sanjeev
- [U-Boot] [PATCH 0/3] omap: gpio: Use generic API (instead of custom)
Premi, Sanjeev
- [U-Boot] [PATCH 0/3] omap: gpio: Use generic API (instead of custom)
Luca Ceresoli
- [U-Boot] [PATCH 0/4] Buffer overruns in printf
Simon Glass
- [U-Boot] [PATCH 0/4] Buffer overruns in printf
Albert ARIBAUD
- [U-Boot] [PATCH 0/4] Buffer overruns in printf
Simon Glass
- [U-Boot] [PATCH 0/4] Buffer overruns in printf
Albert ARIBAUD
- [U-Boot] [PATCH 0/4] Buffer overruns in printf
Simon Glass
- [U-Boot] [PATCH 0/4] Buffer overruns in printf
Albert ARIBAUD
- [U-Boot] [PATCH 0/4] Buffer overruns in printf
Simon Glass
- [U-Boot] [PATCH 0/4] Buffer overruns in printf
Wolfgang Denk
- [U-Boot] [PATCH 0/4] Buffer overruns in printf
Albert ARIBAUD
- [U-Boot] [PATCH 0/4] Buffer overruns in printf
Simon Glass
- [U-Boot] [PATCH 0/4] Buffer overruns in printf
Simon Glass
- [U-Boot] [PATCH 0/4] Buffer overruns in printf
Wolfgang Denk
- [U-Boot] [PATCH 0/4] Buffer overruns in printf
Scott Wood
- [U-Boot] [PATCH 0/4] Buffer overruns in printf
Albert ARIBAUD
- [U-Boot] [PATCH 0/4] Clock fix and MXC I2C rework series
Marek Vasut
- [U-Boot] [PATCH 0/4] davinci: addition of emac features
nagabhushana.netagunte at ti.com
- [U-Boot] [PATCH 0/4] Move ehci headers, add Efika USB support
Jana Rapava
- [U-Boot] [PATCH 0/4] Move ehci headers, add Efika USB support
Marek Vasut
- [U-Boot] [PATCH 0/4] omap3: Add DMA driver
Simon Schwarz
- [U-Boot] [PATCH 0/4] smdkv310 modifications
Chander Kashyap
- [U-Boot] [PATCH 0/4] smdkv310 modifications
Minkyu Kang
- [U-Boot] [PATCH 0/5 V2] Random NAND fixes and improvements
Marek Vasut
- [U-Boot] [PATCH 0/5] addition of clocks command for davinci
nagabhushana.netagunte at ti.com
- [U-Boot] [PATCH 0/5] Random NAND fixes and improvements
Marek Vasut
- [U-Boot] [PATCH 0/6] da850: add board specific functions
nagabhushana.netagunte at ti.com
- [U-Boot] [PATCH 0/6] OMAP3 SPL: Use DMA to copy images from NAND to RAM
Simon Schwarz
- [U-Boot] [PATCH 0/6] OMAP3 SPL: Use DMA to copy images from NAND to RAM
Simon Schwarz
- [U-Boot] [PATCH 0/6] omap3evm: Clean-up and add new configurations
Sanjeev Premi
- [U-Boot] [PATCH 0/6] tegra2: Add more clock/pinmux functionality
Simon Glass
- [U-Boot] [PATCH 0/6] tegra2: Add more clock/pinmux functionality
Simon Glass
- [U-Boot] [PATCH 0/6] tegra2: Add more clock/pinmux functionality
Tom Warren
- [U-Boot] [PATCH 0/6] tegra2: Add more clock/pinmux functionality
Simon Glass
- [U-Boot] [PATCH 0/6] YAFFS2: fix build warnings
Wolfgang Denk
- [U-Boot] [PATCH 0/7] Bootgraph.pl instrumentation support for UBoot
Mike Frysinger
- [U-Boot] [PATCH 0/7] Bootgraph.pl instrumentation support for UBoot
Simon Glass
- [U-Boot] [PATCH 0/7] Bootgraph.pl instrumentation support for UBoot
Andrew Murray
- [U-Boot] [PATCH 0/7] Bootgraph.pl instrumentation support for UBoot
Graeme Russ
- [U-Boot] [PATCH 0/7] Bootgraph.pl instrumentation support for UBoot
Simon Glass
- [U-Boot] [PATCH 0/7] Bootgraph.pl instrumentation support for UBoot
Andrew Murray
- [U-Boot] [PATCH 0/7] Bootgraph.pl instrumentation support for UBoot
Andrew Murray
- [U-Boot] [PATCH 0/7] Bootgraph.pl instrumentation support for UBoot
Simon Glass
- [U-Boot] [PATCH 0/7] Bootgraph.pl instrumentation support for UBoot
Graeme Russ
- [U-Boot] [PATCH 0/7] Bootgraph.pl instrumentation support for UBoot
Simon Glass
- [U-Boot] [PATCH 0/7] Bootgraph.pl instrumentation support for UBoot
Simon Glass
- [U-Boot] [PATCH 0/7] Bootgraph.pl instrumentation support for UBoot
Andrew Murray
- [U-Boot] [PATCH 0/7] Bootgraph.pl instrumentation support for UBoot
Graeme Russ
- [U-Boot] [PATCH 0/8] arm, davinci: add support for the am1808 based enbw_cmc board
Heiko Schocher
- [U-Boot] [PATCH 00/10] ARM board removal, next round
Wolfgang Denk
- [U-Boot] [PATCH 00/11 V2] Support for both FEC interfaces on i.MX28
Marek Vasut
- [U-Boot] [PATCH 00/11] Support for both FEC interfaces on i.MX28
Marek Vasut
- [U-Boot] [PATCH 00/15 V2] Support for the DENX M28 SoM
Marek Vasut
- [U-Boot] [PATCH 00/31] Support for the DENX M28 SoM
Marek Vasut
- [U-Boot] [PATCH 01/10] ARM: remove broken "SMN42" board.
Wolfgang Denk
- [U-Boot] [PATCH 01/10] ARM: remove broken "SMN42" board.
Wolfgang Denk
- [U-Boot] [PATCH 01/10] microblaze: Fix in/out_be8/16/32 functions
Wolfgang Denk
- [U-Boot] [PATCH 01/11] FEC: Use proper accessor to read register in debug call
Marek Vasut
- [U-Boot] [PATCH 01/11] FEC: Use proper accessor to read register in debug call
Marek Vasut
- [U-Boot] [PATCH 01/11] FEC: Use proper accessor to read register in debug call
Stefano Babic
- [U-Boot] [PATCH 01/15 V2] iMX28: Initial support for iMX28 CPU
Marek Vasut
- [U-Boot] [PATCH 01/15 V3] iMX28: Initial support for iMX28 CPU
Marek Vasut
- [U-Boot] [PATCH 01/15] iMX28: Initial support for iMX28 CPU
Marek Vasut
- [U-Boot] [PATCH 01/15] iMX28: Initial support for iMX28 CPU
Stefano Babic
- [U-Boot] [PATCH 01/15] Make bootm optionally use pre-existing atags for Linux kernel boot.
Mike Frysinger
- [U-Boot] [PATCH 01/15] Make bootm optionally use pre-existing atags for Linux kernel boot.
Pali Rohár
- [U-Boot] [PATCH 01/26] net: emaclite: Change driver name and add address
Michal Simek
- [U-Boot] [PATCH 01/31] iMX28: Initial support for iMX28 CPU
Marek Vasut
- [U-Boot] [PATCH 01/31] iMX28: Initial support for iMX28 CPU
Stefano Babic
- [U-Boot] [PATCH 01/31] iMX28: Initial support for iMX28 CPU
Heiko Schocher
- [U-Boot] [PATCH 01/31] iMX28: Initial support for iMX28 CPU
Marek Vasut
- [U-Boot] [PATCH 01/31] iMX28: Initial support for iMX28 CPU
Stefano Babic
- [U-Boot] [PATCH 01/31] iMX28: Initial support for iMX28 CPU
Marek Vasut
- [U-Boot] [PATCH 01/31] iMX28: Initial support for iMX28 CPU
Stefano Babic
- [U-Boot] [PATCH 01/48] ARM: Update mach-types
Marek Vasut
- [U-Boot] [PATCH 01/48] ARM: Update mach-types
Jason
- [U-Boot] [PATCH 01/48] ARM: Update mach-types
Marek Vasut
- [U-Boot] [PATCH 01/48] ARM: Update mach-types
Jason
- [U-Boot] [PATCH 01/48] ARM: Update mach-types
Marek Vasut
- [U-Boot] [PATCH 01/48] ARM: Update mach-types
Jason
- [U-Boot] [PATCH 01/48] ARM: Update mach-types
Wolfgang Denk
- [U-Boot] [PATCH 01/48] ARM: Update mach-types
Marek Vasut
- [U-Boot] [PATCH 01/48] ARM: Update mach-types
Wolfgang Denk
- [U-Boot] [PATCH 01/48] ARM: Update mach-types
Jason
- [U-Boot] [PATCH 01/48] ARM: Update mach-types
Wolfgang Denk
- [U-Boot] [PATCH 01/48] ARM: Update mach-types
Jason
- [U-Boot] [PATCH 02/10] ARM: remove broken "dnp1110" board.
Wolfgang Denk
- [U-Boot] [PATCH 02/10] ARM: remove broken "dnp1110" board.
Wolfgang Denk
- [U-Boot] [PATCH 02/11] FEC: Use defined constant instead of magic number
Stefano Babic
- [U-Boot] [PATCH 02/11] FEC: Use defined constant instead of magic number
Marek Vasut
- [U-Boot] [PATCH 02/11] FEC: Use defined constant instead of magic number
Marek Vasut
- [U-Boot] [PATCH 02/13] BeagleBoard: config: Switch console to ttyO2
Steve Sakoman
- [U-Boot] [PATCH 02/15] iMX28: Add SSP MMC driver
Marek Vasut
- [U-Boot] [PATCH 02/15] Store existing atags at startup if chainloading.
Pali Rohár
- [U-Boot] [PATCH 02/26] net: emaclite: Remove deviceid property
Michal Simek
- [U-Boot] [PATCH 02/31] iMX28: Add basic support for DENX M28EVK board
Marek Vasut
- [U-Boot] [PATCH 02/31] iMX28: Add basic support for DENX M28EVK board
Stefano Babic
- [U-Boot] [PATCH 02/31] iMX28: Add basic support for DENX M28EVK board
Igor Grinberg
- [U-Boot] [PATCH 03/10] ARM: remove broken "ep7312" board.
Wolfgang Denk
- [U-Boot] [PATCH 03/10] ARM: remove broken "ep7312" board.
Wolfgang Denk
- [U-Boot] [PATCH 03/10] microblaze: Support flashes on lower addresses
Michal Simek
- [U-Boot] [PATCH 03/10] microblaze: Support flashes on lower addresses
Wolfgang Denk
- [U-Boot] [PATCH 03/11] FEC: Kill mode select FIXME's
Marek Vasut
- [U-Boot] [PATCH 03/11] FEC: Kill mode select FIXME's
Mike Frysinger
- [U-Boot] [PATCH 03/11] FEC: Kill mode select FIXME's
Marek Vasut
- [U-Boot] [PATCH 03/11] FEC: Kill mode select FIXME's
Marek Vasut
- [U-Boot] [PATCH 03/11] FEC: Kill mode select FIXME's
Stefano Babic
- [U-Boot] [PATCH 03/15] FEC: Add support for iMX28 quirks
Marek Vasut
- [U-Boot] [PATCH 03/15] FEC: Add support for iMX28 quirks
Stefano Babic
- [U-Boot] [PATCH 03/15] FEC: Add support for iMX28 quirks
Marek Vasut
- [U-Boot] [PATCH 03/15] FEC: Add support for iMX28 quirks
Mike Frysinger
- [U-Boot] [PATCH 03/15] Nokia RX-51 aka N900 support
Pali Rohár
- [U-Boot] [PATCH 03/15] Nokia RX-51 aka N900 support
Mike Frysinger
- [U-Boot] [PATCH 03/26] net: emaclite: Use calloc instead of malloc
Michal Simek
- [U-Boot] [PATCH 03/31] iMX28: Add support for SSP MMC
Marek Vasut
- [U-Boot] [PATCH 04/10] ARM: remove broken "evb4510" board.
Wolfgang Denk
- [U-Boot] [PATCH 04/10] ARM: remove broken "evb4510" board.
Wolfgang Denk
- [U-Boot] [PATCH 04/10] microblaze: Add netconsole support
Michal Simek
- [U-Boot] [PATCH 04/10] microblaze: Add netconsole support
Wolfgang Denk
- [U-Boot] [PATCH 04/11] FEC: Add RMII mode support
Marek Vasut
- [U-Boot] [PATCH 04/11] FEC: Add RMII mode support
Marek Vasut
- [U-Boot] [PATCH 04/11] FEC: Add RMII mode support
Stefano Babic
- [U-Boot] [PATCH 04/15] iMX28: Add PINMUX control
Marek Vasut
- [U-Boot] [PATCH 04/15] Only delay boot if keyboard open
Pali Rohár
- [U-Boot] [PATCH 04/15] Only delay boot if keyboard open
Mike Frysinger
- [U-Boot] [PATCH 04/26] net: emaclite: Remove baseaddress from xemaclite
Michal Simek
- [U-Boot] [PATCH 04/31] M28EVK: Enable MMC support
Marek Vasut
- [U-Boot] [PATCH 04/31] M28EVK: Enable MMC support
Stefano Babic
- [U-Boot] [PATCH 05/10] ARM: remove broken "gcplus" board.
Wolfgang Denk
- [U-Boot] [PATCH 05/10] ARM: remove broken "gcplus" board.
George G. Davis
- [U-Boot] [PATCH 05/10] ARM: remove broken "gcplus" board.
Wolfgang Denk
- [U-Boot] [PATCH 05/10] microblaze: Fix unaligned.h for endians
Michal Simek
- [U-Boot] [PATCH 05/11] FEC: Allow selection of MII mode via CONFIG_FEC_XCV_TYPE
Marek Vasut
- [U-Boot] [PATCH 05/11] FEC: Allow selection of MII mode via CONFIG_FEC_XCV_TYPE
Mike Frysinger
- [U-Boot] [PATCH 05/11] FEC: Allow selection of MII mode via CONFIG_FEC_XCV_TYPE
Marek Vasut
- [U-Boot] [PATCH 05/11] FEC: Allow selection of MII mode via CONFIG_FEC_XCV_TYPE
Marek Vasut
- [U-Boot] [PATCH 05/11] FEC: Allow selection of MII mode via CONFIG_FEC_XCV_TYPE
Stefano Babic
- [U-Boot] [PATCH 05/15 V2] iMX28: Add I2C bus driver
Marek Vasut
- [U-Boot] [PATCH 05/15] Change Wireless LAN mode from M4 to M0
Pali Rohár
- [U-Boot] [PATCH 05/15] iMX28: Add I2C bus driver
Marek Vasut
- [U-Boot] [PATCH 05/15] iMX28: Add I2C bus driver
Heiko Schocher
- [U-Boot] [PATCH 05/15] iMX28: Add I2C bus driver
Marek Vasut
- [U-Boot] [PATCH 05/15] iMX28: Add I2C bus driver
Wolfram Sang
- [U-Boot] [PATCH 05/15] iMX28: Add I2C bus driver
Marek Vasut
- [U-Boot] [PATCH 05/15] iMX28: Add I2C bus driver
Wolfram Sang
- [U-Boot] [PATCH 05/15] iMX28: Add I2C bus driver
Marek Vasut
- [U-Boot] [PATCH 05/15] iMX28: Add I2C bus driver
Wolfram Sang
- [U-Boot] [PATCH 05/26] net: emaclite: Use dynamic allocation
Michal Simek
- [U-Boot] [PATCH 05/31] iMX28: Add pinctrl and ocotp register definitions
Marek Vasut
- [U-Boot] [PATCH 05/31] iMX28: Add pinctrl and ocotp register definitions
Stefano Babic
- [U-Boot] [PATCH 06/10] ARM: remove broken "impa7" board.
Wolfgang Denk
- [U-Boot] [PATCH 06/10] ARM: remove broken "impa7" board.
Wolfgang Denk
- [U-Boot] [PATCH 06/11] FEC: Abstract access to fec->eth in MII operations
Marek Vasut
- [U-Boot] [PATCH 06/11] FEC: Abstract access to fec->eth in MII operations
Marek Vasut
- [U-Boot] [PATCH 06/11] FEC: Abstract access to fec->eth in MII operations
Stefano Babic
- [U-Boot] [PATCH 06/15] iMX28: Add GPIO control
Marek Vasut
- [U-Boot] [PATCH 06/15] iMX28: Add GPIO control
Stefano Babic
- [U-Boot] [PATCH 06/15] Look for boot.scr on 'mmc 0:3' instead 'mmc 0' and add support for loading boot.scr from 'mmc 2:1'
Pali Rohár
- [U-Boot] [PATCH 06/26] net: emaclite: Setup RX/TX ping pong for every instance
Michal Simek
- [U-Boot] [PATCH 06/31] FEC: Add support for iMX28 quirks
Marek Vasut
- [U-Boot] [PATCH 07/10] ARM: remove broken "lart" board.
Wolfgang Denk
- [U-Boot] [PATCH 07/10] ARM: remove broken "lart" board.
Wolfgang Denk
- [U-Boot] [PATCH 07/11] FEC: Allow multiple FECes
Marek Vasut
- [U-Boot] [PATCH 07/11] FEC: Allow multiple FECes
Marek Vasut
- [U-Boot] [PATCH 07/15 V2] iMX28: Add SPI driver
Marek Vasut
- [U-Boot] [PATCH 07/15 V2] iMX28: Add SPI driver
Mike Frysinger
- [U-Boot] [PATCH 07/15 V2] iMX28: Add SPI driver
Marek Vasut
- [U-Boot] [PATCH 07/15] iMX28: Add SPI driver
Marek Vasut
- [U-Boot] [PATCH 07/15] iMX28: Add SPI driver
Mike Frysinger
- [U-Boot] [PATCH 07/15] iMX28: Add SPI driver
Marek Vasut
- [U-Boot] [PATCH 07/15] iMX28: Add SPI driver
Mike Frysinger
- [U-Boot] [PATCH 07/15] iMX28: Add SPI driver
Marek Vasut
- [U-Boot] [PATCH 07/15] RX-51: Fixed compilation on top of master (changes from Beagle Board)
Pali Rohár
- [PATCH 07/15] RX-51: Fixed compilation on top of master (changes from Beagle Board)
Pali Rohár
- [U-Boot] [PATCH 07/26] net: emaclite: Use unsigned long for baseaddr
Michal Simek
- [U-Boot] [PATCH 07/31] iMX28: Add CPU-specific FEC ethernet init
Marek Vasut
- [U-Boot] [PATCH 08/10] ARM: remove broken "lpc2292sodimm" board.
Wolfgang Denk
- [U-Boot] [PATCH 08/10] ARM: remove broken "lpc2292sodimm" board.
Wolfgang Denk
- [U-Boot] [PATCH 08/11] FEC: Allow registering MII postconfiguration callback
Stefano Babic
- [U-Boot] [PATCH 08/11] FEC: Allow registering MII postconfiguration callback
Marek Vasut
- [U-Boot] [PATCH 08/11] FEC: Allow registering MII postconfiguration callback
Marek Vasut
- [U-Boot] [PATCH 08/15] iMX28: Add APBH DMA driver
Marek Vasut
- [U-Boot] [PATCH 08/15] RX-51: Add support for resetting twl4030 watchdog
Pali Rohár
- [U-Boot] [PATCH 08/26] net: emaclite: Move RX/TX ping pong initialization to board
Michal Simek
- [U-Boot] [PATCH 08/31] M28EVK: Enable FEC0 and FEC1
Marek Vasut
- [U-Boot] [PATCH 09/10] ARM: remove broken "modnet50" board.
Wolfgang Denk
- [U-Boot] [PATCH 09/10] ARM: remove broken "modnet50" board.
Wolfgang Denk
- [U-Boot] [PATCH 09/11] FEC: Add timeout for chip reset
Marek Vasut
- [U-Boot] [PATCH 09/11] FEC: Add timeout for chip reset
Marek Vasut
- [U-Boot] [PATCH 09/11] FEC: Add timeout for chip reset
Stefano Babic
- [U-Boot] [PATCH 09/12] da850: read MAC address from I2C EEPROM on AM18xx EVM
Netagunte, Nagabhushana
- [U-Boot] [PATCH 09/15 V2] iMX28: Add GPMI NAND driver
Marek Vasut
- [U-Boot] [PATCH 09/15 V3] iMX28: Add GPMI NAND driver
Marek Vasut
- [U-Boot] [PATCH 09/15 V4] iMX28: Add GPMI NAND driver
Marek Vasut
- [U-Boot] [PATCH 09/15 V5] iMX28: Add GPMI NAND driver
Marek Vasut
- [U-Boot] [PATCH 09/15] iMX28: Add GPMI NAND driver
Marek Vasut
- [U-Boot] [PATCH 09/15] iMX28: Add GPMI NAND driver
Scott Wood
- [U-Boot] [PATCH 09/15] iMX28: Add GPMI NAND driver
Marek Vasut
- [U-Boot] [PATCH 09/15] iMX28: Add GPMI NAND driver
Scott Wood
- [U-Boot] [PATCH 09/15] iMX28: Add GPMI NAND driver
Marek Vasut
- [U-Boot] [PATCH 09/15] iMX28: Add GPMI NAND driver
Marek Vasut
- [U-Boot] [PATCH 09/15] iMX28: Add GPMI NAND driver
Scott Wood
- [U-Boot] [PATCH 09/15] iMX28: Add GPMI NAND driver
Scott Wood
- [U-Boot] [PATCH 09/15] iMX28: Add GPMI NAND driver
Marek Vasut
- [U-Boot] [PATCH 09/15] RX-51: Fix keymap
Pali Rohár
- [U-Boot] [PATCH 09/26] net: emaclite: Use PKTSIZE directly
Michal Simek
- [U-Boot] [PATCH 09/31] iMX28: Add PINMUX control
Marek Vasut
- [U-Boot] [PATCH 1/1 V2] add support for mcf5307 cpu
angelo
- [U-Boot] [PATCH 1/1 V2] add support for mcf5307 cpu
Jin Zhengxiong-R64188
- [U-Boot] [PATCH 1/1 V3] add support for mcf5307 cpu
Angelo Dureghello
- [U-Boot] [PATCH 1/1 V3] add support for mcf5307 cpu
Jin Zhengxiong-R64188
- [U-Boot] [PATCH 1/13] mx31pdk: Remove dram_init_banksize()
Fabio Estevam
- [U-Boot] [PATCH 1/13] mx31pdk: Remove dram_init_banksize()
Stefano Babic
- [U-Boot] [PATCH 1/1] mmc: omap: enable high capacity
Andy Fleming
- [U-Boot] [PATCH 1/1] mmc: omap: enable high capacity
T Krishnamoorthy, Balaji
- [U-Boot] [PATCH 1/1] mmc: omap: enable high capacity
Simon Glass
- [U-Boot] [PATCH 1/1] mmc: omap: enable high capacity
Paulraj, Sandeep
- [U-Boot] [PATCH 1/1] mmc: omap: enable high capacity
T Krishnamoorthy, Balaji
- [U-Boot] [PATCH 1/1] mmc: omap: enable high capacity
Paulraj, Sandeep
- [U-Boot] [PATCH 1/1] mmc: omap: enable high capacity
Paulraj, Sandeep
- [U-Boot] [PATCH 1/2 RESEND] SPL: Make path to start.S configurable
Marek Vasut
- [U-Boot] [PATCH 1/2 V2] EfikaMX: Add imximage config for Efika SB
Stefano Babic
- [U-Boot] [PATCH 1/2 V2] EfikaMX: Add imximage config for Efika SB
Marek Vasut
- [U-Boot] [PATCH 1/2 V2] EfikaMX: Add imximage config for Efika SB
Marek Vasut
- [U-Boot] [PATCH 1/2 V2] GCC4.6: Convert various empty macros to inline functions
Marek Vasut
- [U-Boot] [PATCH 1/2 v2] USB cleanup for EfikaMX
Jana Rapava
- [U-Boot] [PATCH 1/2 v2] USB cleanup for EfikaMX
Marek Vasut
- [U-Boot] [PATCH 1/2] arm, davinci: add RTC base addr
Heiko Schocher
- [U-Boot] [PATCH 1/2] arm/km: add variable waitforne to mgcoge3un
Holger Brunck
- [U-Boot] [PATCH 1/2] ARM: mx25: Print the silicon revison
Stefano Babic
- [U-Boot] [PATCH 1/2] coldfire: Fix compilation for most coldfire boards
Jin Zhengxiong-R64188
- [U-Boot] [PATCH 1/2] coldfire: Fix compilation for most coldfire boards
Wolfgang Denk
- [U-Boot] [PATCH 1/2] coldfire: Fix compilation for most coldfire boards
Stany MARCEL
- [U-Boot] [PATCH 1/2] coldfire: Fix compilation for most coldfire boards
Jin Zhengxiong-R64188
- [U-Boot] [PATCH 1/2] coldfire: Fix compilation for most coldfire boards
Jin Zhengxiong-R64188
- [U-Boot] [PATCH 1/2] coldfire: Fix compilation for most coldfire boards
Stany MARCEL
- [U-Boot] [PATCH 1/2] coldfire: Fix compilation for most coldfire boards
Jin Zhengxiong-R64188
- [U-Boot] [PATCH 1/2] console: Squelch pre-console output in console functions
Simon Glass
- [U-Boot] [PATCH 1/2] cosmetic, powerpc, mpc83xx: checkpatch cleanup
Heiko Schocher
- [U-Boot] [PATCH 1/2] devkit8000: protect board_mmc_init
Simon Schwarz
- [U-Boot] [PATCH 1/2] dm646x: add new configuration for dm6467T
nagabhushana.netagunte at ti.com
- [U-Boot] [PATCH 1/2] EfikaMX: Add imximage config for Efika SB
Marek Vasut
- [U-Boot] [PATCH 1/2] EfikaMX: Add imximage config for Efika SB
Stefano Babic
- [U-Boot] [PATCH 1/2] env: set individual variables to default
Gerlando Falauto
- [U-Boot] [PATCH 1/2] env: set individual variables to default
Wolfgang Denk
- [U-Boot] [PATCH 1/2] env: set individual variables to default
Gerlando Falauto
- [U-Boot] [PATCH 1/2] env: set individual variables to default
Wolfgang Denk
- [U-Boot] [PATCH 1/2] env: set individual variables to default
Gerlando Falauto
- [U-Boot] [PATCH 1/2] env: set individual variables to default
Wolfgang Denk
- [U-Boot] [PATCH 1/2] env: set individual variables to default
Gerlando Falauto
- [U-Boot] [PATCH 1/2] GCC4.6: Convert various empty macros to inline functions
Marek Vasut
- [U-Boot] [PATCH 1/2] GCC4.6: Convert various empty macros to inline functions
Mike Frysinger
- [U-Boot] [PATCH 1/2] GCC4.6: Convert various empty macros to inline functions
Mike Frysinger
- [U-Boot] [PATCH 1/2] GCC4.6: Convert various empty macros to inline functions
Marek Vasut
- [U-Boot] [PATCH 1/2] GCC4.6: Convert various empty macros to inline functions
Mike Frysinger
- [U-Boot] [PATCH 1/2] GCC4.6: Convert various empty macros to inline functions
Marek Vasut
- [U-Boot] [PATCH 1/2] image: Support relative-addresses property in FIT images
Stephen Warren
- [U-Boot] [PATCH 1/2] misc:max8998 Support for MAX8998 PMIC driver
Lukasz Majewski
- [U-Boot] [PATCH 1/2] mpc85xx: support board-specific reset function
Ira W. Snyder
- [U-Boot] [PATCH 1/2] mx31: define pins and init for UART2 and CSPI3
Helmut Raiger
- [U-Boot] [PATCH 1/2] MX31: fix missing mxc_get_clk() call
Wolfgang Denk
- [U-Boot] [PATCH 1/2] mx31: make HSP clock for mx3fb driver available
Marek Vasut
- [U-Boot] [PATCH 1/2] mx31: make HSP clock for mx3fb driver available
Helmut Raiger
- [U-Boot] [PATCH 1/2] mx31pdk: Disable watchdog
Fabio Estevam
- [U-Boot] [PATCH 1/2] mx31pdk: Disable watchdog
Stefano Babic
- [U-Boot] [PATCH 1/2] mx31pdk: Disable watchdog
Sergei Shtylyov
- [U-Boot] [PATCH 1/2] mx31pdk: Disable watchdog
Fabio Estevam
- [U-Boot] [PATCH 1/2] mx31pdk: Disable watchdog
Stefano Babic
- [U-Boot] [PATCH 1/2] mx31pdk: Disable watchdog
Fabio Estevam
- [U-Boot] [PATCH 1/2] mx31pdk: Disable watchdog
Fabio Estevam
- [U-Boot] [PATCH 1/2] net/eth.c: throw BUG for eth_get_dev_by_name(NULL)
Wolfgang Denk
- [U-Boot] [PATCH 1/2] phylib: reset mii bus only if reset handler is registered
Detlev Zundel
- [U-Boot] [PATCH 1/2] phylib: reset mii bus only if reset handler is registered
Wolfgang Denk
- [U-Boot] [PATCH 1/2] phylib: reset mii bus only if reset handler is registered
Mike Frysinger
- [U-Boot] [PATCH 1/2] phylib: reset mii bus only if reset handler is registered
Vladimir Zapolskiy
- [U-Boot] [PATCH 1/2] phylib: reset mii bus only if reset handler is registered
Andy Fleming
- [U-Boot] [PATCH 1/2] phylib: reset mii bus only if reset handler is registered
Andy Fleming
- [U-Boot] [PATCH 1/2] powerpc/85xx: CONFIG_ENABLE_36BIT_PHYS does not depend on CONFIG_PHYS_64BIT
Timur Tabi
- [U-Boot] [PATCH 1/2] powerpc/85xx: CONFIG_ENABLE_36BIT_PHYS does not depend on CONFIG_PHYS_64BIT
Timur Tabi
- [U-Boot] [PATCH 1/2] powerpc/p2041: update cpld reset command according to CPLD 2.0
Shaohui Xie
- [U-Boot] [PATCH 1/2] powerpc/p2041rdb: updated description of cpld command
Kumar Gala
- [U-Boot] [PATCH 1/2] SPL: Make path to start.S configurable
Marek Vasut
- [U-Boot] [PATCH 1/2] SPL: Make path to start.S configurable
Scott Wood
- [U-Boot] [PATCH 1/2] SPL: Make path to start.S configurable
Marek Vasut
- [U-Boot] [PATCH 1/2] SPL: Make path to start.S configurable
Scott Wood
- [U-Boot] [PATCH 1/2] SPL: Make path to start.S configurable
Marek Vasut
- [U-Boot] [PATCH 1/2] U-Boot/SPL: omap4: Make ddr pre-calculated timings as default.
sricharan
- [U-Boot] [PATCH 1/2] VIDEO: MX5: Switch MX5 to CONFIG_VIDEO
Stefano Babic
- [U-Boot] [PATCH 1/3] arm, davinci: move davinci_timer in header file
Heiko Schocher
- [U-Boot] [PATCH 1/3] fdt: check for fdt errors in fdt_create_phandle
Timur Tabi
- [U-Boot] [PATCH 1/3] image: add support for Android's boot image format
Mike Frysinger
- [U-Boot] [PATCH 1/3] image: add support for Android's boot image format
Wolfgang Denk
- [U-Boot] [PATCH 1/3] image: add support for Android's boot image format
Sebastian Andrzej Siewior
- [U-Boot] [PATCH 1/3] image: add support for Android's boot image format
Mike Frysinger
- [U-Boot] [PATCH 1/3] image: add support for Android's boot image format
Wolfgang Denk
- [U-Boot] [PATCH 1/3] image: add support for Android's boot image format
Sebastian Andrzej Siewior
- [U-Boot] [PATCH 1/3] image: add support for Android's boot image format
Mike Frysinger
- [U-Boot] [PATCH 1/3] image: add support for Android's boot image format
Sebastian Andrzej Siewior
- [U-Boot] [PATCH 1/3] image: add support for Android's boot image format
Sebastian Andrzej Siewior
- [U-Boot] [PATCH 1/3] image: add support for Android's boot image format
Sebastian Andrzej Siewior
- [U-Boot] [PATCH 1/3] image: add support for Android's boot image format
Sebastian Andrzej Siewior
- [U-Boot] [PATCH 1/3] km/common: force set ethaddr only for KM kirkwood boards
Holger Brunck
- [U-Boot] [PATCH 1/3] misc:pmic New generic pmic driver
Lukasz Majewski
- [U-Boot] [PATCH 1/3] mkimage: ublimage must return if the header is not verified
Stefano Babic
- [U-Boot] [PATCH 1/3] mkimage: ublimage must return if the header is not verified
Heiko Schocher
- [U-Boot] [PATCH 1/3] nand: Remove static modifier from common functions
Simon Schwarz
- [U-Boot] [PATCH 1/3] omap4: replacing OMAP4_CONTROL with OMAP4430_CONTROL
Ricardo Salveti de Araujo
- [U-Boot] [PATCH 1/3] omap: gpio: Use generic API
Sanjeev Premi
- [U-Boot] [PATCH 1/3] powerpc/mpc8xxx: Extend CWL table
Kumar Gala
- [U-Boot] [PATCH 1/3] powerpc/p4080: Add support for secure boot flow
Ruchika Gupta
- [U-Boot] [PATCH 1/4 V2] MX5: Modify the PLL decoding algorithm
Marek Vasut
- [U-Boot] [PATCH 1/4] Add limits.h to hold basic limits
Simon Glass
- [U-Boot] [PATCH 1/4] davinci: emac: add new features to autonegotiate for EMAC
nagabhushana.netagunte at ti.com
- [U-Boot] [PATCH 1/4] davinci: emac: add new features to autonegotiate for EMAC
Laurence Withers
- [U-Boot] [PATCH 1/4] MX5: Modify the PLL decoding algorithm
Marek Vasut
- [U-Boot] [PATCH 1/4] MX5: Modify the PLL decoding algorithm
Jason Hui
- [U-Boot] [PATCH 1/4] MX5: Modify the PLL decoding algorithm
Stefano Babic
- [U-Boot] [PATCH 1/4] omap3: Add Base register for DMA
Simon Schwarz
- [U-Boot] [PATCH 1/4] SMDKV310: Initialize board id using CONFIG_MACH_TYPE
Chander Kashyap
- [U-Boot] [PATCH 1/4] SPI: Add SPI driver support for Marvell Armada100
Ajay Bhargav
- [U-Boot] [PATCH 1/4] SPI: Add SPI driver support for Marvell Armada100
Marek Vasut
- [U-Boot] [PATCH 1/4] SPI: Add SPI driver support for Marvell Armada100
Marek Vasut
- [U-Boot] [PATCH 1/4] SPI: Add SPI driver support for Marvell Armada100
Mike Frysinger
- [U-Boot] [PATCH 1/4] SPI: Add SPI driver support for Marvell Armada100
Ajay Bhargav
- [U-Boot] [PATCH 1/4] tegra2: Seaboard's MMC has an 8-bit bus
Stephen Warren
- [U-Boot] [PATCH 1/4] usb: Move ehci.h and ehci-core.h to include/usb directory
Marek Vasut
- [U-Boot] [PATCH 1/4] usb: Move ehci.h and ehci-core.h to include/usb directory
Jana Rapava
- [U-Boot] [PATCH 1/4] usb: Move ehci.h and ehci-core.h to include/usb directory
Jana Rapava
- [U-Boot] [PATCH 1/4] zmx25: Remove dram_init_banksize()
Fabio Estevam
- [U-Boot] [PATCH 1/4] zmx25: Remove dram_init_banksize()
Stefano Babic
- [U-Boot] [PATCH 1/5 v1] integrator: pass configs for core modules
Linus Walleij
- [U-Boot] [PATCH 1/5 v1] integrator: pass configs for core modules
Linus Walleij
- [U-Boot] [PATCH 1/5] arm/km: adapt bootcounter evaluation
Holger Brunck
- [U-Boot] [PATCH 1/5] coldfire: Change timer_init return type from void to int
Wolfgang Denk
- [U-Boot] [PATCH 1/5] da830: disable cache usage due to coherency issues
Tom Rini
- [U-Boot] [PATCH 1/5] da830: disable cache usage due to coherency issues
Netagunte, Nagabhushana
- [U-Boot] [PATCH 1/5] da830: disable cache usage due to coherency issues
Nick Thompson
- [U-Boot] [PATCH 1/5] da830: disable cache usage due to coherency issues
Netagunte, Nagabhushana
- [U-Boot] [PATCH 1/5] davinci : move clock related functions to new file
nagabhushana.netagunte at ti.com
- [U-Boot] [PATCH 1/5] GCC4.6: Squash warning in nand_bbt.c
Marek Vasut
- [U-Boot] [PATCH 1/5] GCC4.6: Squash warning in nand_bbt.c
Mike Frysinger
- [U-Boot] [PATCH 1/5] NAND: Really ignore bad blocks when scrubbing
Scott Wood
- [U-Boot] [PATCH 1/5] NAND: Really ignore bad blocks when scrubbing
Marek Vasut
- [U-Boot] [PATCH 1/5] NAND: Really ignore bad blocks when scrubbing
Marek Vasut
- [U-Boot] [PATCH 1/6] ColdFire: Cleanup lds files for multiple defined symbols
Stany MARCEL
- [U-Boot] [PATCH 1/6] ColdFire: Cleanup lds files for multiple defined symbols
Jin Zhengxiong-R64188
- [U-Boot] [PATCH 1/6] ColdFire: Cleanup lds files for multiple defined symbols
Stany MARCEL
- [U-Boot] [PATCH 1/6] da850: add new config file for AM18xx
nagabhushana.netagunte at ti.com
- [U-Boot] [PATCH 1/6] omap3evm: Reorder related config options
Sanjeev Premi
- [U-Boot] [PATCH 1/6] tegra2: Rename CLOCK_PLL_ID to CLOCK_ID
Simon Glass
- [U-Boot] [PATCH 1/6] YAFFS2: cmd_yaffs2.c - fix build warnings
Wolfgang Denk
- [U-Boot] [PATCH 1/6] YAFFS2: cmd_yaffs2.c - fix build warnings
Wolfgang Denk
- [U-Boot] [PATCH 1/7 V2] GCC4.6: Convert various empty macros to inline functions
Marek Vasut
- [U-Boot] [PATCH 1/7 V2] GCC4.6: Convert various empty macros to inline functions
Mike Frysinger
- [U-Boot] [PATCH 1/7 V2] GCC4.6: Convert various empty macros to inline functions
Marek Vasut
- [U-Boot] [PATCH 1/7 V2] GCC4.6: Convert various empty macros to inline functions
Wolfgang Denk
- [U-Boot] [PATCH 1/7 V2] GCC4.6: Convert various empty macros to inline functions
Fabio Estevam
- [U-Boot] [PATCH 1/7 V3] GCC4.6: Convert various empty macros to inline functions
Marek Vasut
- [U-Boot] [PATCH 1/7] Add bootgraph.pl script for generating a boot graph SVG file
Andrew Murray
- [U-Boot] [PATCH 1/8] arm, davinci: add SYSCFG1 base and register struct
Heiko Schocher
- [U-Boot] [PATCH 1/8] MX35: added ESDC structure to imx-regs
Stefano Babic
- [U-Boot] [PATCH 1/9] powerpc/mpc8548cds: Fix booting message
Zhao Chenhui
- [U-Boot] [PATCH 10/10] ARM: remove broken "shannon" board.
Wolfgang Denk
- [U-Boot] [PATCH 10/10] ARM: remove broken "shannon" board.
Wolfgang Denk
- [U-Boot] [PATCH 10/11] FEC: Squish "got MAC from fuse" message, make it debug()
Marek Vasut
- [U-Boot] [PATCH 10/11] FEC: Squish "got MAC from fuse" message, make it debug()
Marek Vasut
- [U-Boot] [PATCH 10/11] FEC: Squish "got MAC from fuse" message, make it debug()
Stefano Babic
- [U-Boot] [PATCH 10/13] mx53loco: Place machine ID into board config
Stefano Babic
- [U-Boot] [PATCH 10/13] mx53loco: Place machine ID into board config
Jason Hui
- [U-Boot] [PATCH 10/13] mx53loco: Place machine ID into board config
Stefano Babic
- [U-Boot] [PATCH 10/13] mx53loco: Place machine ID into board config
Fabio Estevam
- [U-Boot] [PATCH 10/15] iMX28: Add driver for internal RTC
Marek Vasut
- [U-Boot] [PATCH 10/15] include/common.h: Add some macros for ANSI escape codes
Pali Rohár
- [U-Boot] [PATCH 10/26] net: emaclite: Fix coding style
Michal Simek
- [U-Boot] [PATCH 10/31] iMX28: Add RTC register definitions
Marek Vasut
- [U-Boot] [PATCH 11/11] FEC: Move imx_get_mac_from_fuse() definition to fec_mxc.h
Marek Vasut
- [U-Boot] [PATCH 11/11] FEC: Move imx_get_mac_from_fuse() definition to fec_mxc.h
Marek Vasut
- [U-Boot] [PATCH 11/11] FEC: Move imx_get_mac_from_fuse() definition to fec_mxc.h
Stefano Babic
- [U-Boot] [PATCH 11/13] mx53smd: Place machine ID into board config
Stefano Babic
- [U-Boot] [PATCH 11/13] mx53smd: Place machine ID into board config
Fabio Estevam
- [U-Boot] [PATCH 11/15 V2] iMX28: Add image header generator tool
Marek Vasut
- [U-Boot] [PATCH 11/15] drivers/video/cfb_console.c: Added support for ANSI escape codes
Pali Rohár
- [U-Boot] [PATCH 11/15] iMX28: Add image header generator tool
Marek Vasut
- [U-Boot] [PATCH 11/15] iMX28: Add image header generator tool
Mike Frysinger
- [U-Boot] [PATCH 11/15] iMX28: Add image header generator tool
Marek Vasut
- [U-Boot] [PATCH 11/15] iMX28: Add image header generator tool
Mike Frysinger
- [U-Boot] [PATCH 11/15] iMX28: Add image header generator tool
Marek Vasut
- [U-Boot] [PATCH 11/26] microblaze: Support CTRL+C when tftp is running
Michal Simek
- [U-Boot] [PATCH 11/26] microblaze: Support CTRL+C when tftp is running
Mike Frysinger
- [U-Boot] [PATCH 11/26] microblaze: Support CTRL+C when tftp is running
Mike Frysinger
- [U-Boot] [PATCH 11/26] microblaze: Support CTRL+C when tftp is running
Michal Simek
- [U-Boot] [PATCH 11/31] iMX28: Add I2C register definitions
Marek Vasut
- [U-Boot] [PATCH 11/31] iMX28: Add I2C register definitions
Heiko Schocher
- [U-Boot] [PATCH 12/13] mx53ard: Place machine ID into board config
Stefano Babic
- [U-Boot] [PATCH 12/13] mx53ard: Place machine ID into board config
Fabio Estevam
- [U-Boot] [PATCH 12/15 V2] iMX28: Add u-boot.sb target to Makefile
Marek Vasut
- [U-Boot] [PATCH 12/15] iMX28: Add u-boot.sb target to Makefile
Marek Vasut
- [U-Boot] [PATCH 12/15] iMX28: Add u-boot.sb target to Makefile
Mike Frysinger
- [U-Boot] [PATCH 12/15] iMX28: Add u-boot.sb target to Makefile
Marek Vasut
- [U-Boot] [PATCH 12/15] New command bootmenu: ANSI terminal Boot Menu support
Mike Frysinger
- [U-Boot] [PATCH 12/15] New command bootmenu: ANSI terminal Boot Menu support
Pali Rohár
- [U-Boot] [PATCH 12/26] microblaze: Support flashes on lower addresses
Michal Simek
- [U-Boot] [PATCH 12/26] microblaze: Support flashes on lower addresses
Mike Frysinger
- [U-Boot] [PATCH 12/26] microblaze: Support flashes on lower addresses
Michal Simek
- [U-Boot] [PATCH 12/31] iMX28: Add I2C bus driver
Marek Vasut
- [U-Boot] [PATCH 12/31] iMX28: Add I2C bus driver
Heiko Schocher
- [U-Boot] [PATCH 12/31] iMX28: Add I2C bus driver
Marek Vasut
- [U-Boot] [PATCH 12/31] iMX28: Add I2C bus driver
Stefan Roese
- [U-Boot] [PATCH 12/31] iMX28: Add I2C bus driver
Marek Vasut
- [U-Boot] [PATCH 13/13] mx53evk: Place machine ID into board config
Stefano Babic
- [U-Boot] [PATCH 13/13] mx53evk: Place machine ID into board config
Jason Hui
- [U-Boot] [PATCH 13/13] mx53evk: Place machine ID into board config
Stefano Babic
- [U-Boot] [PATCH 13/13] mx53evk: Place machine ID into board config
Fabio Estevam
- [U-Boot] [PATCH 13/15 V2] iMX28: Add support for DENX M28EVK board
Mike Frysinger
- [U-Boot] [PATCH 13/15 V2] iMX28: Add support for DENX M28EVK board
Marek Vasut
- [U-Boot] [PATCH 13/15 V2] iMX28: Add support for DENX M28EVK board
Mike Frysinger
- [U-Boot] [PATCH 13/15 V2] iMX28: Add support for DENX M28EVK board
Marek Vasut
- [U-Boot] [PATCH 13/15 V2] iMX28: Add support for DENX M28EVK board
Mike Frysinger
- [U-Boot] [PATCH 13/15 V2] iMX28: Add support for DENX M28EVK board
Marek Vasut
- [U-Boot] [PATCH 13/15 V2] iMX28: Add support for DENX M28EVK board
Mike Frysinger
- [U-Boot] [PATCH 13/15 V2] iMX28: Add support for DENX M28EVK board
Marek Vasut
- [U-Boot] [PATCH 13/15 V2] iMX28: Add support for DENX M28EVK board
Marek Vasut
- [U-Boot] [PATCH 13/15 V3] iMX28: Add support for DENX M28EVK board
Marek Vasut
- [U-Boot] [PATCH 13/15] iMX28: Add support for DENX M28EVK board
Marek Vasut
- [U-Boot] [PATCH 13/15] New config variable CONFIG_MENU
Pali Rohár
- [U-Boot] [PATCH 13/26] microblaze: Initialize jumptable and console
Michal Simek
- [U-Boot] [PATCH 13/31] M28: Enable I2C, EEPROM and RTC
Marek Vasut
- [U-Boot] [PATCH 13/31] M28: Enable I2C, EEPROM and RTC
Heiko Schocher
- [U-Boot] [PATCH 14/15 V2] M28: Add MMC SPL
Marek Vasut
- [U-Boot] [PATCH 14/15] M28: Add MMC SPL
Marek Vasut
- [U-Boot] [PATCH 14/15] New config variable CONFIG_PREMONITOR
Pali Rohár
- [U-Boot] [PATCH 14/26] microblaze: Fix unaligned.h for endians
Michal Simek
- [U-Boot] [PATCH 14/31] iMX28: Add MMC SPL
Marek Vasut
- [U-Boot] [PATCH 14/31] iMX28: Add MMC SPL
Chander Kashyap
- [U-Boot] [PATCH 14/31] iMX28: Add MMC SPL
Wolfgang Denk
- [U-Boot] [PATCH 14/31] iMX28: Add MMC SPL
Marek Vasut
- [U-Boot] [PATCH 14/31] iMX28: Add MMC SPL
Chander Kashyap
- [U-Boot] [PATCH 14/31] iMX28: Add MMC SPL
Marek Vasut
- [U-Boot] [PATCH 14/31] iMX28: Add MMC SPL
Marek Vasut
- [U-Boot] [PATCH 15/15] M28: Add doc/README.m28 documentation
Marek Vasut
- [U-Boot] [PATCH 15/15] RX-51: Add support for bootmenu
Pali Rohár
- [U-Boot] [PATCH 15/26] microblaze: Copy bootfile from variables
Michal Simek
- [U-Boot] [PATCH 15/31] M28: Enable MMC SPL
Marek Vasut
- [U-Boot] [PATCH 16/26] microblaze: Remove debug saving value
Michal Simek
- [U-Boot] [PATCH 16/31] iMX28: Add GPIO control
Marek Vasut
- [U-Boot] [PATCH 16/31] iMX28: Add GPIO control
Stefano Babic
- [U-Boot] [PATCH 17/26] microblaze: Setup MB vectors if feature is enable for u-boot
Michal Simek
- [U-Boot] [PATCH 17/31] M28: Enable use of GPIO configurators
Marek Vasut
- [U-Boot] [PATCH 18/26] microblaze: Save and restore first unused vector
Michal Simek
- [U-Boot] [PATCH 18/31] iMX28: Add SPI driver
Marek Vasut
- [U-Boot] [PATCH 18/31] iMX28: Add SPI driver
Stefano Babic
- [U-Boot] [PATCH 18/31] iMX28: Add SPI driver
Marek Vasut
- [U-Boot] [PATCH 18/31] iMX28: Add SPI driver
Stefano Babic
- [U-Boot] [PATCH 18/31] iMX28: Add SPI driver
Marek Vasut
- [U-Boot] [PATCH 19/26] microblaze: Clean up reset asm code
Michal Simek
- [U-Boot] [PATCH 19/31] M28EVK: Enable SPI and SPI flash
Marek Vasut
- [U-Boot] [PATCH 2/13] mx25pdk: Remove dram_init_banksize()
Fabio Estevam
- [U-Boot] [PATCH 2/13] mx25pdk: Remove dram_init_banksize()
Stefano Babic
- [U-Boot] [PATCH 2/2 RESEND] SPL: Allow user to disable CPU support library
Marek Vasut
- [U-Boot] [PATCH 2/2 RESEND] SPL: Allow user to disable CPU support library
Scott Wood
- [U-Boot] [PATCH 2/2 RESEND] SPL: Allow user to disable CPU support library
Marek Vasut
- [U-Boot] [PATCH 2/2 RESEND] SPL: Allow user to disable CPU support library
Marek Vasut
- [U-Boot] [PATCH 2/2 RESEND] SPL: Allow user to disable CPU support library
Marek Vasut
- [U-Boot] [PATCH 2/2 RESEND] SPL: Allow user to disable CPU support library
Marek Vasut
- [U-Boot] [PATCH 2/2 RESEND] SPL: Allow user to disable CPU support library
Scott Wood
- [U-Boot] [PATCH 2/2 RESEND] SPL: Allow user to disable CPU support library
Marek Vasut
- [U-Boot] [PATCH 2/2 RESEND] SPL: Allow user to disable CPU support library
Marek Vasut
- [U-Boot] [PATCH 2/2 RESEND] SPL: Allow user to disable CPU support library
Marek Vasut
- [U-Boot] [PATCH 2/2 RESEND] SPL: Allow user to disable CPU support library
Marek Vasut
- [U-Boot] [PATCH 2/2 RESEND] SPL: Allow user to disable CPU support library
Scott Wood
- [U-Boot] [PATCH 2/2 RESEND] SPL: Allow user to disable CPU support library
Scott Wood
- [U-Boot] [PATCH 2/2 RESEND] SPL: Allow user to disable CPU support library
Scott Wood
- [U-Boot] [PATCH 2/2 RESEND] SPL: Allow user to disable CPU support library
Scott Wood
- [U-Boot] [PATCH 2/2 RESEND] SPL: Allow user to disable CPU support library
Scott Wood
- [U-Boot] [PATCH 2/2 RESEND] SPL: Allow user to disable CPU support library
Scott Wood
- [U-Boot] [PATCH 2/2 V2] EfikaSB: Add preliminary EfikaSB support
Marek Vasut
- [U-Boot] [PATCH 2/2 V2] EfikaSB: Add preliminary EfikaSB support
Stefano Babic
- [U-Boot] [PATCH 2/2] arm/km/mgcoge3un: enhance "waitforne" feature
Holger Brunck
- [U-Boot] [PATCH 2/2] ARM: mx25: Print the source of reset
Stefano Babic
- [U-Boot] [PATCH 2/2] coldfire: Fix compilation with CONFIG_SYS_DRAMSZ1 defined
Stany MARCEL
- [U-Boot] [PATCH 2/2] devkit8000: Add config to enable SPL MMC boot
Simon Schwarz
- [U-Boot] [PATCH 2/2] dm646x: pass board revision info to kernel
nagabhushana.netagunte at ti.com
- [U-Boot] [PATCH 2/2] dm646x: pass board revision info to kernel
Sergei Shtylyov
- [U-Boot] [PATCH 2/2] EfikaSB: Add preliminary EfikaSB support
Marek Vasut
- [U-Boot] [PATCH 2/2] EfikaSB: Add preliminary EfikaSB support
Stefano Babic
- [U-Boot] [PATCH 2/2] EfikaSB: Add preliminary EfikaSB support
Marek Vasut
- [U-Boot] [PATCH 2/2] EfikaSB: Add preliminary EfikaSB support
Stefano Babic
- [U-Boot] [PATCH 2/2] EfikaSB: Add preliminary EfikaSB support
Marek Vasut
- [U-Boot] [PATCH 2/2] GCC4.6: Remove unused "port" variable in cmd_usb.c
Marek Vasut
- [U-Boot] [PATCH 2/2] GCC4.6: Remove unused "port" variable in cmd_usb.c
Remy Bohmer
- [U-Boot] [PATCH 2/2] I2C: mxc: fix compilation for MX31
Heiko Schocher
- [U-Boot] [PATCH 2/2] I2C: mxc: fix compilation for MX31
Stefano Babic
- [U-Boot] [PATCH 2/2] I2C: mxc: fix compilation for MX31
Heiko Schocher
- [U-Boot] [PATCH 2/2] I2C: mxc: fix compilation for MX31
Wolfgang Denk
- [U-Boot] [PATCH 2/2] km/common: enable "env default" for all keymile boards
Gerlando Falauto
- [U-Boot] [PATCH 2/2] Makefile: remove mx31pdk exception
Fabio Estevam
- [U-Boot] [PATCH 2/2] misc:samsung:s5p Enable MAX8998 support at GONI reference target
Lukasz Majewski
- [U-Boot] [PATCH 2/2] mmc: omap: config VMMC, MMC1_PBIAS
Balaji T K
- [U-Boot] [PATCH 2/2] mmc: omap: config VMMC, MMC1_PBIAS
T Krishnamoorthy, Balaji
- [U-Boot] [PATCH 2/2] Moving mx3fb.c to CONFIG_VIDEO
Helmut Raiger
- [U-Boot] [PATCH 2/2] Moving mx3fb.c to CONFIG_VIDEO
Stefano Babic
- [U-Boot] [PATCH 2/2] Moving mx3fb.c to CONFIG_VIDEO
Anatolij Gustschin
- [U-Boot] [PATCH 2/2] Moving mx3fb.c to CONFIG_VIDEO
Stefano Babic
- [U-Boot] [PATCH 2/2] Moving mx3fb.c to CONFIG_VIDEO
Helmut Raiger
- [U-Boot] [PATCH 2/2] Moving mx3fb.c to CONFIG_VIDEO
Stefano Babic
- [U-Boot] [PATCH 2/2] Moving mx3fb.c to CONFIG_VIDEO
Anatolij Gustschin
- [U-Boot] [PATCH 2/2] mpc85xx: support for Freescale COM Express P2020
Ira W. Snyder
- [U-Boot] [PATCH 2/2] MX27: Update to autogenerated asm-offsets.h
Wolfgang Denk
- [U-Boot] [PATCH 2/2] MX27: Update to autogenerated asm-offsets.h
Stefano Babic
- [U-Boot] [PATCH 2/2] MX27: Update to autogenerated asm-offsets.h
Wolfgang Denk
- [U-Boot] [PATCH 2/2] mx31pdk: Change the prompt as per other i.MX boards
Stefano Babic
- [U-Boot] [PATCH 2/2] mx31pdk: Change the prompt as per other i.MX boards
Stefano Babic
- [U-Boot] [PATCH 2/2] mx31pdk: Change the prompt as per other i.MX boards
Fabio Estevam
- [U-Boot] [PATCH 2/2] MX5: Switch vision2 to CONFIG_VIDEO
Stefano Babic
- [U-Boot] [PATCH 2/2] phylib: remove a couple of redundant code lines
Detlev Zundel
- [U-Boot] [PATCH 2/2] phylib: remove a couple of redundant code lines
Wolfgang Denk
- [U-Boot] [PATCH 2/2] phylib: remove a couple of redundant code lines
Andy Fleming
- [U-Boot] [PATCH 2/2] phylib: remove a couple of redundant code lines
Wolfgang Denk
- [U-Boot] [PATCH 2/2] phylib: remove a couple of redundant code lines
Wolfgang Denk
- [U-Boot] [PATCH 2/2] phylib: remove a couple of redundant code lines
Vladimir Zapolskiy
- [U-Boot] [PATCH 2/2] phylib: remove a couple of redundant code lines
Vladimir Zapolskiy
- [U-Boot] [PATCH 2/2] powerpc, mpc83xx: add DDR SDRAM Timing Configuration 3 definitions
Heiko Schocher
- [U-Boot] [PATCH 2/2] powerpc/85xx: don't display address map size (32-bit vs. 36-bit) during boot
Timur Tabi
- [U-Boot] [PATCH 2/2] powerpc/85xx: standardize display of address map size (32-bit vs. 36-bit)
Kumar Gala
- [U-Boot] [PATCH 2/2] powerpc/85xx: standardize display of address map size (32-bit vs. 36-bit)
Timur Tabi
- [U-Boot] [PATCH 2/2] powerpc/85xx: standardize display of address map size (32-bit vs. 36-bit)
Wolfgang Denk
- [U-Boot] [PATCH 2/2] powerpc/85xx: standardize display of address map size (32-bit vs. 36-bit)
Wolfgang Denk
- [U-Boot] [PATCH 2/2] powerpc/85xx: standardize display of address map size (32-bit vs. 36-bit)
Kumar Gala
- [U-Boot] [PATCH 2/2] powerpc/85xx: standardize display of address map size (32-bit vs. 36-bit)
Kumar Gala
- [U-Boot] [PATCH 2/2] powerpc/85xx: standardize display of address map size (32-bit vs. 36-bit)
Kumar Gala
- [U-Boot] [PATCH 2/2] powerpc/85xx: standardize display of address map size (32-bit vs. 36-bit)
Wolfgang Denk
- [U-Boot] [PATCH 2/2] powerpc/85xx: standardize display of address map size (32-bit vs. 36-bit)
Wolfgang Denk
- [U-Boot] [PATCH 2/2] powerpc/85xx: standardize display of address map size (32-bit vs. 36-bit)
Wolfgang Denk
- [U-Boot] [PATCH 2/2] powerpc/85xx: standardize display of address map size (32-bit vs. 36-bit)
Wolfgang Denk
- [U-Boot] [PATCH 2/2] powerpc/85xx: standardize display of address map size (32-bit vs. 36-bit)
Timur Tabi
- [U-Boot] [PATCH 2/2] powerpc/85xx: standardize display of address map size (32-bit vs. 36-bit)
Timur Tabi
- [U-Boot] [PATCH 2/2] powerpc/85xx: standardize display of address map size (32-bit vs. 36-bit)
Timur Tabi
- [U-Boot] [PATCH 2/2] powerpc/85xx: standardize display of address map size (32-bit vs. 36-bit)
Tabi Timur-B04825
- [U-Boot] [PATCH 2/2] powerpc/85xx: standardize display of address map size (32-bit vs. 36-bit)
Timur Tabi
- [U-Boot] [PATCH 2/2] powerpc/85xx: standardize display of address map size (32-bit vs. 36-bit)
Timur Tabi
- [U-Boot] [PATCH 2/2] powerpc/p2041: set sysclk according to status of physical switch SW1
Shaohui Xie
- [U-Boot] [PATCH 2/2] powerpc/p2041rdb: remove watch dog related codes
Kumar Gala
- [U-Boot] [PATCH 2/2] rtc, davinci: add support for davinci internal RTC
Heiko Schocher
- [U-Boot] [PATCH 2/2] smc911x MII made available
Wolfgang Denk
- [U-Boot] [PATCH 2/2] SPL: Allow user to disable CPU support library
Marek Vasut
- [U-Boot] [PATCH 2/2] SPL: omap4: Reduce the maximum size of SPL to 32K bytes.
Andreas Bießmann
- [U-Boot] [PATCH 2/2] SPL: omap4: Reduce the maximum size of SPL to 32K bytes.
sricharan
- [U-Boot] [PATCH 2/2] SPL: omap4: Reduce the maximum size of SPL to 32K bytes.
Sricharan R
- [U-Boot] [PATCH 2/2] tegra2: Enable new image format (FIT)
Stephen Warren
- [U-Boot] [PATCH 2/2] TT-01: add basic board support for HALE TT-01
Fabio Estevam
- [U-Boot] [PATCH 2/2] TT-01: add basic board support for HALE TT-01
Stefano Babic
- [U-Boot] [PATCH 2/2] TT-01: add basic board support for HALE TT-01
Wolfgang Denk
- [U-Boot] [PATCH 2/2] TT-01: add basic board support for HALE TT-01
Helmut Raiger
- [U-Boot] [PATCH 2/3] arm, davinci: add missing timer baseaddresses for !DA8xx cpu
Heiko Schocher
- [U-Boot] [PATCH 2/3] BeagleBoard: Added userbutton command
Albert ARIBAUD
- [U-Boot] [PATCH 2/3] BeagleBoard: Added userbutton command
Wolfgang Denk
- [U-Boot] [PATCH 2/3] BeagleBoard: Added userbutton command
Joel A Fernandes
- [U-Boot] [PATCH 2/3] BeagleBoard: Added userbutton command
Albert ARIBAUD
- [U-Boot] [PATCH 2/3] BeagleBoard: Added userbutton command
Kridner, Jason
- [U-Boot] [PATCH 2/3] BeagleBoard: Added userbutton command
Joel A Fernandes
- [U-Boot] [PATCH 2/3] BeagleBoard: Added userbutton command
Joel A Fernandes
- [U-Boot] [PATCH 2/3] BeagleBoard: Added userbutton command
Jason Kridner
- [U-Boot] [PATCH 2/3] BeagleBoard: Added userbutton command
Joel A Fernandes
- [U-Boot] [PATCH 2/3] BeagleBoard: Added userbutton command
Joel A Fernandes
- [U-Boot] [PATCH 2/3] BeagleBoard: Added userbutton command
Joel A Fernandes
- [U-Boot] [PATCH 2/3] fdt: update fdt_alloc_phandle to use fdt_get_phandle
Timur Tabi
- [U-Boot] [PATCH 2/3] km/common: fix ramfs development target
Holger Brunck
- [U-Boot] [PATCH 2/3] misc:pmic: Enable PMIC handling at u-boot startup code
Lukasz Majewski
- [U-Boot] [PATCH 2/3] mkimage: Add variable lenght header support
Stefano Babic
- [U-Boot] [PATCH 2/3] nand: Add common functions to nand.h
Simon Schwarz
- [U-Boot] [PATCH 2/3] omap4: adding revision detection for 4460 ES1.1
Ricardo Salveti de Araujo
- [U-Boot] [PATCH 2/3] omap: gpio: generic changes after changing API
Sanjeev Premi
- [U-Boot] [PATCH 2/3] powerpc/85xx: Add PBL & SECUREBOOT support on P3041/P5020DS boards
Ruchika Gupta
- [U-Boot] [PATCH 2/3] powerpc/mpc8xxx: Move DDR RCW overriding to common code
Kumar Gala
- [U-Boot] [PATCH 2/3] usb/gadget: add the fastboot gadget
Sebastian Andrzej Siewior
- [U-Boot] [PATCH 2/3] usb/gadget: add the fastboot gadget
Wolfgang Denk
- [U-Boot] [PATCH 2/4 V2] MX5: Add AHB clock reporting and fix IPG clock reporting
Jason Hui
- [U-Boot] [PATCH 2/4 V2] MX5: Add AHB clock reporting and fix IPG clock reporting
Marek Vasut
- [U-Boot] [PATCH 2/4] Add safe vsnprintf and snprintf library functions
Simon Glass
- [U-Boot] [PATCH 2/4] Add safe vsnprintf and snprintf library functions
Sonny Rao
- [U-Boot] [PATCH 2/4] Add safe vsnprintf and snprintf library functions
Graeme Russ
- [U-Boot] [PATCH 2/4] Add safe vsnprintf and snprintf library functions
Sonny Rao
- [U-Boot] [PATCH 2/4] Add safe vsnprintf and snprintf library functions
Graeme Russ
- [U-Boot] [PATCH 2/4] Add safe vsnprintf and snprintf library functions
Graeme Russ
- [U-Boot] [PATCH 2/4] Armada100: Add SPI support for Marvell gplugD
Ajay Bhargav
- [U-Boot] [PATCH 2/4] da830: emac: add support for RMII
nagabhushana.netagunte at ti.com
- [U-Boot] [PATCH 2/4] da830: emac: add support for RMII
Mike Frysinger
- [U-Boot] [PATCH 2/4] EHCI: add callback ehci_fixup
Jana Rapava
- [U-Boot] [PATCH 2/4] MX5: Add AHB clock reporting and fix IPG clock reporting
Jason Hui
- [U-Boot] [PATCH 2/4] MX5: Add AHB clock reporting and fix IPG clock reporting
Marek Vasut
- [U-Boot] [PATCH 2/4] MX5: Add AHB clock reporting and fix IPG clock reporting
Jason Hui
- [U-Boot] [PATCH 2/4] MX5: Add AHB clock reporting and fix IPG clock reporting
Marek Vasut
- [U-Boot] [PATCH 2/4] omap3: Add DMA register accessors
Simon Schwarz
- [U-Boot] [PATCH 2/4] SMDKV310: use get_ram_size() to validate dram size
Chander Kashyap
- [U-Boot] [PATCH 2/4] tegra2: Call gpio_request for SDMMC GPIOs
Stephen Warren
- [U-Boot] [PATCH 2/4] zmx25: Place machine ID into board config
Fabio Estevam
- [U-Boot] [PATCH 2/5 v1] integrator: move text offset to config
Linus Walleij
- [U-Boot] [PATCH 2/5 V2] NAND: Add nand read.raw and write.raw commands
Marek Vasut
- [U-Boot] [PATCH 2/5 V2] NAND: Add nand read.raw and write.raw commands
Scott Wood
- [U-Boot] [PATCH 2/5 V3] NAND: Add nand read.raw and write.raw commands
Marek Vasut
- [U-Boot] [PATCH 2/5 V3] NAND: Add nand read.raw and write.raw commands
Scott Wood
- [U-Boot] [PATCH 2/5 V4] NAND: Add nand read.raw and write.raw commands
Marek Vasut
- [U-Boot] [PATCH 2/5 V4] NAND: Add nand read.raw and write.raw commands
Scott Wood
- [U-Boot] [PATCH 2/5] arm/km: portl2 environment address update to P1B
Holger Brunck
- [U-Boot] [PATCH 2/5] davinci: remove macro CONFIG_DISPLAY_CPUINFO
nagabhushana.netagunte at ti.com
- [U-Boot] [PATCH 2/5] GCC4,6: Squash warning in cmd_nand.c
Marek Vasut
- [U-Boot] [PATCH 2/5] GCC4,6: Squash warning in cmd_nand.c
Marek Vasut
- [U-Boot] [PATCH 2/5] GCC4,6: Squash warning in cmd_nand.c
Mike Frysinger
- [U-Boot] [PATCH 2/5] NAND: Add nand read.raw and write.raw commands
Scott Wood
- [U-Boot] [PATCH 2/5] NAND: Add nand read.raw and write.raw commands
Marek Vasut
- [U-Boot] [PATCH 2/5] NAND: Add nand read.raw and write.raw commands
Marek Vasut
- [U-Boot] [PATCH 2/6] ColdFire: Add $(obj) before cpu lib to correct build
Stany MARCEL
- [U-Boot] [PATCH 2/6] da850: rename config file to represent OMAP-L138
nagabhushana.netagunte at ti.com
- [U-Boot] [PATCH 2/6] omap3evm: Prepare to split configuration
Sanjeev Premi
- [U-Boot] [PATCH 2/6] tegra2: Clean up board code a little
Simon Glass
- [U-Boot] [PATCH 2/6] YAFFS2: fs/yaffs2/yaffscfg.c - fix build warnings
Wolfgang Denk
- [U-Boot] [PATCH 2/6] YAFFS2: fs/yaffs2/yaffscfg.c - fix build warnings
Wolfgang Denk
- [U-Boot] [PATCH 2/7 RESEND] GCC4.6: Remove unused "port" variable in cmd_usb.c
Mike Frysinger
- [U-Boot] [PATCH 2/7 RESEND] GCC4.6: Remove unused "port" variable in cmd_usb.c
Marek Vasut
- [U-Boot] [PATCH 2/7] Add macros for recording init calls during UBoot execution
Andrew Murray
- [U-Boot] [PATCH 2/7] Add macros for recording init calls during UBoot execution
Mike Frysinger
- [U-Boot] [PATCH 2/7] Add macros for recording init calls during UBoot execution
Andrew Murray
- [U-Boot] [PATCH 2/8] arm, davinci: add some missing defines in hardware.h
Heiko Schocher
- [U-Boot] [PATCH 2/8] MX35: add pins definition for UART3
Stefano Babic
- [U-Boot] [PATCH 2/9] powerpc/mpc85xxcds: Fix PCI speed
Zhao Chenhui
- [U-Boot] [PATCH 2/9] powerpc/mpc85xxcds: Fix PCI speed
Wolfgang Denk
- [U-Boot] [PATCH 2/9] powerpc/mpc85xxcds: Fix PCI speed
Tabi Timur-B04825
- [U-Boot] [PATCH 2/9] powerpc/mpc85xxcds: Fix PCI speed
Scott Wood
- [U-Boot] [PATCH 2/9] powerpc/mpc85xxcds: Fix PCI speed
Timur Tabi
- [U-Boot] [PATCH 2/9] powerpc/mpc85xxcds: Fix PCI speed
Scott Wood
- [U-Boot] [PATCH 2/9] powerpc/mpc85xxcds: Fix PCI speed
Wolfgang Denk
- [U-Boot] [PATCH 2/9] powerpc/mpc85xxcds: Fix PCI speed
Timur Tabi
- [U-Boot] [PATCH 2/9] powerpc/mpc85xxcds: Fix PCI speed
Zhao Chenhui
- [U-Boot] [PATCH 2/9] powerpc/mpc85xxcds: Fix PCI speed
Zhao Chenhui
- [U-Boot] [PATCH 20/26] microblaze: Do not select NFS for platforms without ethernet
Michal Simek
- [U-Boot] [PATCH 20/31] iMX28: Add APBH DMA driver
Marek Vasut
- [U-Boot] [PATCH 21/26] microblaze: Remove address offset for uart16550
Michal Simek
- [U-Boot] [PATCH 21/31] iMX28: Add BCH and GPMI register definitions
Marek Vasut
- [U-Boot] [PATCH 22/26] microblaze: Enable FDT/FIT support
Michal Simek
- [U-Boot] [PATCH 22/31] iMX28: Add GPMI NAND driver
Marek Vasut
- [U-Boot] [PATCH 23/26] serial: uartlite: Support for SERIAL_MULTI
Mike Frysinger
- [U-Boot] [PATCH 23/26] serial: uartlite: Support for SERIAL_MULTI
Michal Simek
- [U-Boot] [PATCH 23/31] M28: Enable NAND
Marek Vasut
- [U-Boot] [PATCH 24/26] microblaze: Enable SERIAL_MULTI
Michal Simek
- [U-Boot] [PATCH 24/31] iMX28: Add driver for internal RTC
Marek Vasut
- [U-Boot] [PATCH 25/26] net: axi_ethernet: Add driver to u-boot
Michal Simek
- [U-Boot] [PATCH 25/31] M28: Enable the internal RTC instead of the M41T62
Stefano Babic
- [U-Boot] [PATCH 25/31] M28: Enable the internal RTC instead of the M41T62
Marek Vasut
- [U-Boot] [PATCH 25/31] M28: Enable the internal RTC instead of the M41T62
Stefano Babic
- [U-Boot] [PATCH 25/31] M28: Enable the internal RTC instead of the M41T62
Marek Vasut
- [U-Boot] [PATCH 26/26] microblaze: Wire up axi_ethernet driver initialization
Michal Simek
- [U-Boot] [PATCH 26/31] M28: Enable UBI and UBIFS
Marek Vasut
- [U-Boot] [PATCH 27/31] M28: Save environment in NAND
Marek Vasut
- [U-Boot] [PATCH 27/31] M28: Save environment in NAND
Scott Wood
- [U-Boot] [PATCH 27/31] M28: Save environment in NAND
Fabio Estevam
- [U-Boot] [PATCH 27/31] M28: Save environment in NAND
Marek Vasut
- [U-Boot] [PATCH 27/31] M28: Save environment in NAND
Scott Wood
- [U-Boot] [PATCH 28/31] iMX28: Add image header generator tool
Marek Vasut
- [U-Boot] [PATCH 28/31] iMX28: Add image header generator tool
Stefano Babic
- [U-Boot] [PATCH 28/31] iMX28: Add image header generator tool
Marek Vasut
- [U-Boot] [PATCH 29/31] M28: Add NAND update scripts
Marek Vasut
- [U-Boot] [PATCH 3/13] mx31ads: Remove dram_init_banksize()
Fabio Estevam
- [U-Boot] [PATCH 3/13] mx31ads: Remove dram_init_banksize()
Stefano Babic
- [U-Boot] [PATCH 3/3 v3] ARM: ARM926EJS - Add cache operations
Simon Guinot
- [U-Boot] [PATCH 3/3 v3] ARM: ARM926EJS - Add cache operations
Marek Vasut
- [U-Boot] [PATCH 3/3 v3] ARM: ARM926EJS - Add cache operations
Simon Guinot
- [U-Boot] [PATCH 3/3 v3] ARM: ARM926EJS - Add cache operations
Marek Vasut
- [U-Boot] [PATCH 3/3 v3] ARM: ARM926EJS - Add cache operations
Albert ARIBAUD
- [U-Boot] [PATCH 3/3 v3] ARM: ARM926EJS - Add cache operations
Marek Vasut
- [U-Boot] [PATCH 3/3 v3] ARM: ARM926EJS - Add cache operations
Albert ARIBAUD
- [U-Boot] [PATCH 3/3 v3] ARM: ARM926EJS - Add cache operations
Marek Vasut
- [U-Boot] [PATCH 3/3 v3] ARM: ARM926EJS - Add cache operations
Albert ARIBAUD
- [U-Boot] [PATCH 3/3 v3] ARM: ARM926EJS - Add cache operations
Marek Vasut
- [U-Boot] [PATCH 3/3] arm, davinci: add internal WDT support for AM1808 cpus
Heiko Schocher
- [U-Boot] [PATCH 3/3] Fix regression in SMDK6400
Simon Schwarz
- [U-Boot] [PATCH 3/3] km/common: remove obsolete header file
Holger Brunck
- [U-Boot] [PATCH 3/3] misc:pmic:mx: Code modification for mx51evk board
Lukasz Majewski
- [U-Boot] [PATCH 3/3] mkimage: adding support for Davinci AIS image
Stefano Babic
- [U-Boot] [PATCH 3/3] omap4: splitting padconfs into common, 4430 and 4460
Ricardo Salveti de Araujo
- [U-Boot] [PATCH 3/3] omap4: splitting padconfs into common, 4430 and 4460
Aneesh V
- [U-Boot] [PATCH 3/3] omap4: splitting padconfs into common, 4430 and 4460
Ricardo Salveti
- [U-Boot] [PATCH 3/3] omap: gpio: Adapt board files to use generic API
Sanjeev Premi
- [U-Boot] [PATCH 3/3] P1010RDB :Secure Boot support added for NOR , NAND and SPIFLASH
Ruchika Gupta
- [U-Boot] [PATCH 3/3] powerpc/85xx: use fdt_create_phandle() to create the Fman firmware phandles
Timur Tabi
- [U-Boot] [PATCH 3/3] powerpc/corenet_ds: Use separated speed tables for UDIMM and RDIMM
Kumar Gala
- [U-Boot] [PATCH 3/4] Armada100: Add SPI flash support for Marvell gplugD
Ajay Bhargav
- [U-Boot] [PATCH 3/4] davinci: emac: add support for more than 1 PHYs
nagabhushana.netagunte at ti.com
- [U-Boot] [PATCH 3/4] davinci: emac: add support for more than 1 PHYs
Laurence Withers
- [U-Boot] [PATCH 3/4] EHCI: adjust for mx5
Jana Rapava
- [U-Boot] [PATCH 3/4] Make printf and vprintf safe from buffer overruns
Simon Glass
- [U-Boot] [PATCH 3/4] Make printf and vprintf safe from buffer overruns
Kumar Gala
- [U-Boot] [PATCH 3/4] Make printf and vprintf safe from buffer overruns
Simon Glass
- [U-Boot] [PATCH 3/4] Make printf and vprintf safe from buffer overruns
Mike Frysinger
- [U-Boot] [PATCH 3/4] Make printf and vprintf safe from buffer overruns
Simon Glass
- [U-Boot] [PATCH 3/4] Make printf and vprintf safe from buffer overruns
Mike Frysinger
- [U-Boot] [PATCH 3/4] Make printf and vprintf safe from buffer overruns
Simon Glass
- [U-Boot] [PATCH 3/4] Make printf and vprintf safe from buffer overruns
Wolfgang Denk
- [U-Boot] [PATCH 3/4] Make printf and vprintf safe from buffer overruns
Wolfgang Denk
- [U-Boot] [PATCH 3/4] Make printf and vprintf safe from buffer overruns
Simon Glass
- [U-Boot] [PATCH 3/4] Make printf and vprintf safe from buffer overruns
Wolfgang Denk
- [U-Boot] [PATCH 3/4] Make printf and vprintf safe from buffer overruns
Simon Glass
- [U-Boot] [PATCH 3/4] MX5: Clean up the output of "clocks" command
Stefano Babic
- [U-Boot] [PATCH 3/4] MX5: Clean up the output of "clocks" command
Jason Hui
- [U-Boot] [PATCH 3/4] MX5: Clean up the output of "clocks" command
Marek Vasut
- [U-Boot] [PATCH 3/4] omap3: Add interface for omap3 DMA
Simon Schwarz
- [U-Boot] [PATCH 3/4] smdkv310: use spl framework for mmc spl
Chander Kashyap
- [U-Boot] [PATCH 3/4] tegra2: Enable second SD port (J5) on Harmony
Stephen Warren
- [U-Boot] [PATCH 3/4] vision2: Place machine ID into board config
Fabio Estevam
- [U-Boot] [PATCH 3/4] vision2: Place machine ID into board config
stefano babic
- [U-Boot] [PATCH 3/5 v1] integrator: do not test first part of the memory
Linus Walleij
- [U-Boot] [PATCH 3/5 V2] GCC4.6: Squash warning in vmt.c
Marek Vasut
- [U-Boot] [PATCH 3/5 V2] GCC4.6: Squash warning in vmt.c
Mike Frysinger
- [U-Boot] [PATCH 3/5] arm/km: add boardid and hwkey to kernel command line
Holger Brunck
- [U-Boot] [PATCH 3/5] da830: add support for NAND boot mode
Netagunte, Nagabhushana
- [U-Boot] [PATCH 3/5] da830: add support for NAND boot mode
Nick Thompson
- [U-Boot] [PATCH 3/5] da830: add support for NAND boot mode
Wolfgang Denk
- [U-Boot] [PATCH 3/5] da830: add support for NAND boot mode
Netagunte, Nagabhushana
- [U-Boot] [PATCH 3/5] da830: add support for NAND boot mode
Netagunte, Nagabhushana
- [U-Boot] [PATCH 3/5] davinci: add clocks command
nagabhushana.netagunte at ti.com
- [U-Boot] [PATCH 3/5] GCC4.6: Squash warning in vmt.c
Marek Vasut
- [U-Boot] [PATCH 3/5] GCC4.6: Squash warning in vmt.c
Mike Frysinger
- [U-Boot] [PATCH 3/5] NAND: Allow per-buffer allocation
Marek Vasut
- [U-Boot] [PATCH 3/5] NAND: Allow per-buffer allocation
Marek Vasut
- [U-Boot] [PATCH 3/5] NAND: Allow per-buffer allocation
Scott Wood
- [U-Boot] [PATCH 3/5] NAND: Allow per-buffer allocation
Wolfgang Denk
- [U-Boot] [PATCH 3/5] NAND: Allow per-buffer allocation
Scott Wood
- [U-Boot] [PATCH 3/5] NAND: Allow per-buffer allocation
Wolfgang Denk
- [U-Boot] [PATCH 3/5] NAND: Allow per-buffer allocation
Marek Vasut
- [U-Boot] [PATCH 3/5] NAND: Allow per-buffer allocation
Stefano Babic
- [U-Boot] [PATCH 3/5] NAND: Allow per-buffer allocation
Marek Vasut
- [U-Boot] [PATCH 3/5] NAND: Allow per-buffer allocation
Scott Wood
- [U-Boot] [PATCH 3/5] NAND: Allow per-buffer allocation
Marek Vasut
- [U-Boot] [PATCH 3/5] NAND: Allow per-buffer allocation
Scott Wood
- [U-Boot] [PATCH 3/5] NAND: Allow per-buffer allocation
Marek Vasut
- [U-Boot] [PATCH 3/5] scsi/ahci: ata id little endian fix
Vadim Bendebury (вб)
- [U-Boot] [PATCH 3/6] ColdFire: Move boards with simple _config rules to boards.cfg
Jin Zhengxiong-R64188
- [U-Boot] [PATCH 3/6] ColdFire: Move boards with simple _config rules to boards.cfg
Stany MARCEL
- [U-Boot] [PATCH 3/6] ColdFire: Move boards with simple _config rules to boards.cfg
Stany MARCEL
- [U-Boot] [PATCH 3/6] da850: pass board revision info to kernel
nagabhushana.netagunte at ti.com
- [U-Boot] [PATCH 3/6] omap3evm: move common config options to new file
Sanjeev Premi
- [U-Boot] [PATCH 3/6] tegra2: Add more clock functions
Simon Glass
- [U-Boot] [PATCH 3/6] USB: Fix complaints about strict aliasing in OHCI-HCD
Remy Bohmer
- [U-Boot] [PATCH 3/6] USB: Fix complaints about strict aliasing in OHCI-HCD
Marek Vasut
- [U-Boot] [PATCH 3/6] USB: Fix complaints about strict aliasing in OHCI-HCD
Mike Frysinger
- [U-Boot] [PATCH 3/6] YAFFS2: fs/yaffs2/Makefile - fix build warnings
Wolfgang Denk
- [U-Boot] [PATCH 3/6] YAFFS2: fs/yaffs2/Makefile - fix build warnings
Wolfgang Denk
- [U-Boot] [PATCH 3/7] Add timing information to printf's for use with bootgraph.pl
Andrew Murray
- [U-Boot] [PATCH 3/7] Add timing information to printf's for use with bootgraph.pl
Mike Frysinger
- [U-Boot] [PATCH 3/7] Add timing information to printf's for use with bootgraph.pl
Wolfgang Denk
- [U-Boot] [PATCH 3/7] Add timing information to printf's for use with bootgraph.pl
Mike Frysinger
- [U-Boot] [PATCH 3/7] Add timing information to printf's for use with bootgraph.pl
Wolfgang Denk
- [U-Boot] [PATCH 3/7] Add timing information to printf's for use with bootgraph.pl
Andrew Murray
- [U-Boot] [PATCH 3/7] Add timing information to printf's for use with bootgraph.pl
Graeme Russ
- [U-Boot] [PATCH 3/7] Add timing information to printf's for use with bootgraph.pl
Andrew Murray
- [U-Boot] [PATCH 3/7] GCC4.6: Squash warning in cmd_flash.c
Marek Vasut
- [U-Boot] [PATCH 3/8] arm, davinci, am1808, gpio: add missing defines for bank 8
Heiko Schocher
- [U-Boot] [PATCH 3/8] MX35: add reset cause as provided by other i.MX
Stefano Babic
- [U-Boot] [PATCH 3/9] powerpc/mpc8548: Add workaround for erratum NMG_DDR120
Zhao Chenhui
- [U-Boot] [PATCH 30/31] i.MX28: Add u-boot.sb target to Makefile
Marek Vasut
- [U-Boot] [PATCH 31/31] M28: Add doc/README.m28 documentation
Marek Vasut
- [U-Boot] [PATCH 4/13] imx31_litekit: Remove dram_init_banksize()
Fabio Estevam
- [U-Boot] [PATCH 4/13] imx31_litekit: Remove dram_init_banksize()
Stefano Babic
- [U-Boot] [PATCH 4/4 V2] I2C: mxc_i2c rework
Marek Vasut
- [U-Boot] [PATCH 4/4 V2] I2C: mxc_i2c rework
Heiko Schocher
- [U-Boot] [PATCH 4/4 V3] I2C: mxc_i2c rework
Marek Vasut
- [U-Boot] [PATCH 4/4 V4] I2C: mxc_i2c rework
Marek Vasut
- [U-Boot] [PATCH 4/4 V4] I2C: mxc_i2c rework
Jason Hui
- [U-Boot] [PATCH 4/4 V4] I2C: mxc_i2c rework
Marek Vasut
- [U-Boot] [PATCH 4/4 V4] I2C: mxc_i2c rework
Jason Hui
- [U-Boot] [PATCH 4/4 V4] I2C: mxc_i2c rework
Marek Vasut
- [U-Boot] [PATCH 4/4 V4] I2C: mxc_i2c rework
Jason Hui
- [U-Boot] [PATCH 4/4 V5] I2C: mxc_i2c rework
Marek Vasut
- [U-Boot] [PATCH 4/4 V5] I2C: mxc_i2c rework
Jason Hui
- [U-Boot] [PATCH 4/4 V5] I2C: mxc_i2c rework
Fabio Estevam
- [U-Boot] [PATCH 4/4 V5] I2C: mxc_i2c rework
Marek Vasut
- [U-Boot] [PATCH 4/4 V5] I2C: mxc_i2c rework
Stefano Babic
- [U-Boot] [PATCH 4/4 V5] I2C: mxc_i2c rework
Heiko Schocher
- [U-Boot] [PATCH 4/4] Armada100: Add env storage support for Marvell gplugD
Ajay Bhargav
- [U-Boot] [PATCH 4/4] davinci: remove obsolete macro CONFIG_EMAC_MDIO_PHY_NUM
nagabhushana.netagunte at ti.com
- [U-Boot] [PATCH 4/4] efikamx: Place machine ID into board config
Fabio Estevam
- [U-Boot] [PATCH 4/4] efikamx: Place machine ID into board config
Marek Vasut
- [U-Boot] [PATCH 4/4] efikamx: Place machine ID into board config
Stefano Babic
- [U-Boot] [PATCH 4/4] efikamx: Place machine ID into board config
Marek Vasut
- [U-Boot] [PATCH 4/4] efikamx: Place machine ID into board config
stefano babic
- [U-Boot] [PATCH 4/4] efikamx: Place machine ID into board config
Marek Vasut
- [U-Boot] [PATCH 4/4] I2C: mxc_i2c rework
Marek Vasut
- [U-Boot] [PATCH 4/4] I2C: mxc_i2c rework
Stefano Babic
- [U-Boot] [PATCH 4/4] I2C: mxc_i2c rework
Marek Vasut
- [U-Boot] [PATCH 4/4] I2C: mxc_i2c rework
Jason Liu
- [U-Boot] [PATCH 4/4] smdkv310: use macro for mmc data read function address
Chander Kashyap
- [U-Boot] [PATCH 4/4] SPL: Add DMA library
Simon Schwarz
- [U-Boot] [PATCH 4/4] tegra2: Add support for Ventana
Stephen Warren
- [U-Boot] [PATCH 4/4] usb: add USB support for Efika
Jana Rapava
- [U-Boot] [PATCH 4/4] usb: add USB support for Efika
Marek Vasut
- [U-Boot] [PATCH 4/4] Use snprintf() in network code
Simon Glass
- [U-Boot] [PATCH 4/4] Use snprintf() in network code
Mike Frysinger
- [U-Boot] [PATCH 4/4] Use snprintf() in network code
Simon Glass
- [U-Boot] [PATCH 4/4] Use snprintf() in network code
Mike Frysinger
- [U-Boot] [PATCH 4/4] Use snprintf() in network code
Simon Glass
- [U-Boot] [PATCH 4/5 v1] integrator: use io-accessors for board init
Linus Walleij
- [U-Boot] [PATCH 4/5 V2] NAND: Make page, erase, oob size available via cmd_nand
Marek Vasut
- [U-Boot] [PATCH 4/5 V2] NAND: Make page, erase, oob size available via cmd_nand
Marek Vasut
- [U-Boot] [PATCH 4/5 V2] NAND: Make page, erase, oob size available via cmd_nand
Marek Vasut
- [U-Boot] [PATCH 4/5 V2] NAND: Make page, erase, oob size available via cmd_nand
Marek Vasut
- [U-Boot] [PATCH 4/5 V2] NAND: Make page, erase, oob size available via cmd_nand
Scott Wood
- [U-Boot] [PATCH 4/5 V2] NAND: Make page, erase, oob size available via cmd_nand
Scott Wood
- [U-Boot] [PATCH 4/5 V2] NAND: Make page, erase, oob size available via cmd_nand
Scott Wood
- [U-Boot] [PATCH 4/5 V2] NAND: Make page, erase, oob size available via cmd_nand
Scott Wood
- [U-Boot] [PATCH 4/5] arm/km: trigger reconfiguration for the Xilinx FPGA
Holger Brunck
- [U-Boot] [PATCH 4/5] dm365: add support to print cpu clock information
nagabhushana.netagunte at ti.com
- [U-Boot] [PATCH 4/5] GCC4.6: Squash warning in cmd_ubi.c:
Marek Vasut
- [U-Boot] [PATCH 4/5] GCC4.6: Squash warning in cmd_ubi.c:
Mike Frysinger
- [U-Boot] [PATCH 4/5] NAND: Make page, erase, oob size available via cmd_nand
Marek Vasut
- [U-Boot] [PATCH 4/5] NAND: Make page, erase, oob size available via cmd_nand
Marek Vasut
- [U-Boot] [PATCH 4/5] NAND: Make page, erase, oob size available via cmd_nand
Scott Wood
- [U-Boot] [PATCH 4/5] NAND: Make page, erase, oob size available via cmd_nand
Wolfgang Denk
- [U-Boot] [PATCH 4/6] ColdFire: Merge differentiated linking files into a sigle one by board
Stany MARCEL
- [U-Boot] [PATCH 4/6] da850: revert cache disable patch
nagabhushana.netagunte at ti.com
- [U-Boot] [PATCH 4/6] da850: revert cache disable patch
Laurence Withers
- [U-Boot] [PATCH 4/6] omap3evm: Add (quick) configuration for MMC/SD only
Sanjeev Premi
- [U-Boot] [PATCH 4/6] tegra2: Rename PIN_ to PINGRP_
Simon Glass
- [U-Boot] [PATCH 4/6] YAFFS2: fs/yaffs2/yaffs_nand.[hc] - fix build warnings
Wolfgang Denk
- [U-Boot] [PATCH 4/6] YAFFS2: fs/yaffs2/yaffs_nand.[hc] - fix build warnings
Wolfgang Denk
- [U-Boot] [PATCH 4/7] Add bootgraph instrumentation for ARM boards
Andrew Murray
- [U-Boot] [PATCH 4/7] GCC4.6: Squash warning in cmd_nvedit.c
Marek Vasut
- [U-Boot] [PATCH 4/7] GCC4.6: Squash warning in cmd_nvedit.c
Mike Frysinger
- [U-Boot] [PATCH 4/7] GCC4.6: Squash warning in cmd_nvedit.c
Mike Frysinger
- [U-Boot] [PATCH 4/7] GCC4.6: Squash warning in cmd_nvedit.c
Simon Glass
- [U-Boot] [PATCH 4/8] arm, davinci: add ddr2 definition
Heiko Schocher
- [U-Boot] [PATCH 4/8] MX35: factorize common assembly code
Stefano Babic
- [U-Boot] [PATCH 4/8] net: emaclite: Remove baseaddress from xemaclite
Wolfgang Denk
- [U-Boot] [PATCH 4/9] powerpc/mpc8548: Add workaround for erratum NMG_eTSEC129
Zhao Chenhui
- [U-Boot] [PATCH 5/13] mx31pdk: Place machine ID into board config
Stefano Babic
- [U-Boot] [PATCH 5/13] mx31pdk: Place machine ID into board config
Fabio Estevam
- [U-Boot] [PATCH 5/5 v1] integrator: make flash writeable on boot
Linus Walleij
- [U-Boot] [PATCH 5/5 v1] integrator: make flash writeable on boot
Mike Frysinger
- [U-Boot] [PATCH 5/5 v1] integrator: make flash writeable on boot
Albert ARIBAUD
- [U-Boot] [PATCH 5/5 v1] integrator: make flash writeable on boot
Wolfgang Denk
- [U-Boot] [PATCH 5/5 v1] integrator: make flash writeable on boot
Albert ARIBAUD
- [U-Boot] [PATCH 5/5 v1] integrator: make flash writeable on boot
Linus Walleij
- [U-Boot] [PATCH 5/5 v1] integrator: make flash writeable on boot
Linus Walleij
- [U-Boot] [PATCH 5/5] arm/km: enable jffs2 cmds
Holger Brunck
- [U-Boot] [PATCH 5/5] da8xx: print ARM and DDR frequency from u-boot
nagabhushana.netagunte at ti.com
- [U-Boot] [PATCH 5/5] GCC4.6: Squash warning in lzo1x_decompress.c
Mike Frysinger
- [U-Boot] [PATCH 5/5] GCC4.6: Squash warning in lzo1x_decompress.c
Marek Vasut
- [U-Boot] [PATCH 5/5] NAND: Add -y option to nand scrub command
Marek Vasut
- [U-Boot] [PATCH 5/5] NAND: Add -y option to nand scrub command
Mike Frysinger
- [U-Boot] [PATCH 5/5] NAND: Add -y option to nand scrub command
Scott Wood
- [U-Boot] [PATCH 5/5] NAND: Add scrub.quiet command option
Marek Vasut
- [U-Boot] [PATCH 5/5] NAND: Add scrub.quiet command option
Detlev Zundel
- [U-Boot] [PATCH 5/5] NAND: Add scrub.quiet command option
Marek Vasut
- [U-Boot] [PATCH 5/5] NAND: Add scrub.quiet command option
Marek Vasut
- [U-Boot] [PATCH 5/5] NAND: Add scrub.quiet command option
Detlev Zundel
- [U-Boot] [PATCH 5/5] NAND: Add scrub.quiet command option
Mike Frysinger
- [U-Boot] [PATCH 5/5] NAND: Add scrub.quiet command option
Marek Vasut
- [U-Boot] [PATCH 5/5] NAND: Add scrub.quiet command option
Scott Wood
- [U-Boot] [PATCH 5/5] NAND: Add scrub.quiet command option
Marek Vasut
- [U-Boot] [PATCH 5/5] NAND: Add scrub.quiet command option
Scott Wood
- [U-Boot] [PATCH 5/5] NAND: Add scrub.quiet command option
Marek Vasut
- [U-Boot] [PATCH 5/5] NAND: Add scrub.quiet command option
Wolfgang Denk
- [U-Boot] [PATCH 5/5] NAND: Add scrub.quiet command option
Marek Vasut
- [U-Boot] [PATCH 5/5] NAND: Add scrub.quiet command option
Scott Wood
- [U-Boot] [PATCH 5/5] NAND: Add scrub.quiet command option
Marek Vasut
- [U-Boot] [PATCH 5/5] NAND: Add scrub.quiet command option
Scott Wood
- [U-Boot] [PATCH 5/5] NAND: Add scrub.quiet command option
Marek Vasut
- [U-Boot] [PATCH 5/5] NAND: Add scrub.quiet command option
Mike Frysinger
- [U-Boot] [PATCH 5/5] NAND: Add scrub.quiet command option
Marek Vasut
- [U-Boot] [PATCH 5/5] NAND: Add scrub.quiet command option
Scott Wood
- [U-Boot] [PATCH 5/5] NAND: Add scrub.quiet command option
Marek Vasut
- [U-Boot] [PATCH 5/5] NAND: Add scrub.quiet command option
Wolfgang Denk
- [U-Boot] [PATCH 5/5] NAND: Add scrub.quiet command option
Marek Vasut
- [U-Boot] [PATCH 5/5] NAND: Add scrub.quiet command option
Scott Wood
- [U-Boot] [PATCH 5/5] NAND: Add scrub.quiet command option
Marek Vasut
- [U-Boot] [PATCH 5/5] NAND: Add scrub.quiet command option
Scott Wood
- [U-Boot] [PATCH 5/6 v2] integrator: make flash writeable on boot
Linus Walleij
- [U-Boot] [PATCH 5/6] ColdFire: Clean Makefile _config rules
Stany MARCEL
- [U-Boot] [PATCH 5/6] da850: add support to read mac address from spi flash
Mike Frysinger
- [U-Boot] [PATCH 5/6] da850: add support to read mac address from spi flash
nagabhushana.netagunte at ti.com
- [U-Boot] [PATCH 5/6] omap3evm: Add (quick) configuration for NAND only
Sanjeev Premi
- [U-Boot] [PATCH 5/6] tegra2: Add more pinmux functions
Simon Glass
- [U-Boot] [PATCH 5/6] YAFFS2: fs/yaffs2/yaffs_guts.c - fix build warnings
Wolfgang Denk
- [U-Boot] [PATCH 5/6] YAFFS2: fs/yaffs2/yaffs_guts.c - fix build warnings
Wolfgang Denk
- [U-Boot] [PATCH 5/7] Add bootgraph instrumentation for bootm command
Andrew Murray
- [U-Boot] [PATCH 5/7] GCC4.6: Squash warnings in lcd.c
Marek Vasut
- [U-Boot] [PATCH 5/8] arm, davinci: add NOR Boot Configuration Word
Heiko Schocher
- [U-Boot] [PATCH 5/8] ARM: moved general function to arm/lib
Stefano Babic
- [U-Boot] [PATCH 5/8] ARM: moved general function to arm/lib
Stefano Babic
- [U-Boot] [PATCH 5/9] powerpc/mpc8548cds: Fix network initialization
Zhao Chenhui
- [U-Boot] [PATCH 6/13] mx25pdk: Place machine ID into board config
Stefano Babic
- [U-Boot] [PATCH 6/13] mx25pdk: Place machine ID into board config
Fabio Estevam
- [U-Boot] [PATCH 6/6] ColdFire: Fix compilation with CONFIG_SYS_DRAMSZ1 defined
Stany MARCEL
- [U-Boot] [PATCH 6/6] da850: read MAC address from I2C EEPROM on AM18xx EVM
nagabhushana.netagunte at ti.com
- [U-Boot] [PATCH 6/6] omap3evm: fix errors caused by multiple definitions
Sanjeev Premi
- [U-Boot] [PATCH 6/6] tegra2: Enable MMC for Seaboard
Simon Glass
- [U-Boot] [PATCH 6/6] YAFFS2: fs/yaffs2/yaffs_guts.c - fix build warnings
Wolfgang Denk
- [U-Boot] [PATCH 6/6] YAFFS2: fs/yaffs2/yaffs_guts.c - fix build warnings
Wolfgang Denk
- [U-Boot] [PATCH 6/7] Add bootgraph instrumentation for UBoot commands
Andrew Murray
- [U-Boot] [PATCH 6/7] GCC4.6: Squash warnings in ipu_disp.c
Marek Vasut
- [U-Boot] [PATCH 6/8] arm, davinci, am1808: add lowlevel functions for booting from NOR
Heiko Schocher
- [U-Boot] [PATCH 6/8] arm, davinci, am1808: add lowlevel functions for booting from NOR
Christian Riesch
- [U-Boot] [PATCH 6/8] arm, davinci, am1808: add lowlevel functions for booting from NOR
Heiko Schocher
- [U-Boot] [PATCH 6/8] arm, davinci, am1808: add lowlevel functions for booting from NOR
Christian Riesch
- [U-Boot] [PATCH 6/8] arm, davinci, am1808: add lowlevel functions for booting from NOR
Heiko Schocher
- [U-Boot] [PATCH 6/8] arm, davinci, am1808: add lowlevel functions for booting from NOR
Christian Riesch
- [U-Boot] [PATCH 6/8] arm, davinci, am1808: add lowlevel functions for booting from NOR
Heiko Schocher
- [U-Boot] [PATCH 6/8] arm, davinci, am1808: add lowlevel functions for booting from NOR
Christian Riesch
- [U-Boot] [PATCH 6/8] arm, davinci, am1808: add lowlevel functions for booting from NOR
Heiko Schocher
- [U-Boot] [PATCH 6/8] arm, davinci, am1808: add lowlevel functions for booting from NOR
Christian Riesch
- [U-Boot] [PATCH 6/8] arm, davinci, am1808: add lowlevel functions for booting from NOR
Heiko Schocher
- [U-Boot] [PATCH 6/8] I2C: added I2C-2 and I2C-3 to MX35
Stefano Babic
- [U-Boot] [PATCH 6/8] I2C: added I2C-2 and I2C-3 to MX35
Heiko Schocher
- [U-Boot] [PATCH 6/8] POST/km_arm: add POST memory tests infrastructure
Mike Frysinger
- [U-Boot] [PATCH 6/9] powerpc/mpc8548cds: Update config file
Zhao Chenhui
- [U-Boot] [PATCH 6/9] powerpc/mpc8548cds: Update config file
Tabi Timur-B04825
- [U-Boot] [PATCH 7/13] mx31ads: Place machine ID into board config
Stefano Babic
- [U-Boot] [PATCH 7/13] mx31ads: Place machine ID into board config
Fabio Estevam
- [U-Boot] [PATCH 7/7] Add documentation for bootgraph.pl
Andrew Murray
- [U-Boot] [PATCH 7/7] GCC4.6: Squash warning in cmd_mem.c
Marek Vasut
- [U-Boot] [PATCH 7/7] GCC4.6: Squash warning in cmd_mem.c
Mike Frysinger
- [U-Boot] [PATCH 7/7] GCC4.6: Squash warning in cmd_mem.c
Wolfgang Denk
- [U-Boot] [PATCH 7/7] GCC4.6: Squash warning in cmd_mem.c
Marek Vasut
- [U-Boot] [PATCH 7/7] GCC4.6: Squash warning in cmd_mem.c
Mike Frysinger
- [U-Boot] [PATCH 7/7] GCC4.6: Squash warning in cmd_mem.c
Marek Vasut
- [U-Boot] [PATCH 7/7] GCC4.6: Squash warning in cmd_mem.c
Wolfgang Denk
- [U-Boot] [PATCH 7/7] GCC4.6: Squash warning in cmd_mem.c
Simon Glass
- [U-Boot] [PATCH 7/7] GCC4.6: Squash warning in cmd_mem.c
Marek Vasut
- [U-Boot] [PATCH 7/7] GCC4.6: Squash warning in cmd_mem.c
Simon Glass
- [U-Boot] [PATCH 7/7] GCC4.6: Squash warning in cmd_mem.c
Marek Vasut
- [U-Boot] [PATCH 7/7] GCC4.6: Squash warning in cmd_mem.c
Marek Vasut
- [U-Boot] [PATCH 7/7] GCC4.6: Squash warning in cmd_mem.c
Wolfgang Denk
- [U-Boot] [PATCH 7/7] GCC4.6: Squash warning in cmd_mem.c
Simon Glass
- [U-Boot] [PATCH 7/7] GCC4.6: Squash warning in cmd_mem.c
Marek Vasut
- [U-Boot] [PATCH 7/7] GCC4.6: Squash warning in cmd_mem.c
Simon Glass
- [U-Boot] [PATCH 7/7] GCC4.6: Squash warning in cmd_mem.c
Mike Frysinger
- [U-Boot] [PATCH 7/8] arm, davinci, da8xx: add cpuinfo
Heiko Schocher
- [U-Boot] [PATCH 7/8] MX35: Drop unnecessary prototypes from imx-regs.h
Stefano Babic
- [U-Boot] [PATCH 7/9] powerpc/mpc8548: Add workaround for erratum NMG_LBC103
Zhao Chenhui
- [U-Boot] [PATCH 8/13] imx31_litekit: Place machine ID into board config
Stefano Babic
- [U-Boot] [PATCH 8/13] imx31_litekit: Place machine ID into board config
Fabio Estevam
- [U-Boot] [PATCH 8/8] arm, davinci: add support for am1808 based enbw_cmc board
Heiko Schocher
- [U-Boot] [PATCH 8/8] arm, davinci: add support for am1808 based enbw_cmc board
Heiko Schocher
- [U-Boot] [PATCH 8/8] arm, davinci: add support for am1808 based enbw_cmc board
Igor Grinberg
- [U-Boot] [PATCH 8/8] MX35: add support for flea3 board
Stefano Babic
- [U-Boot] [PATCH 8/8] MX35: add support for flea3 board
Fabio Estevam
- [U-Boot] [PATCH 8/8] MX35: add support for flea3 board
Fabio Estevam
- [U-Boot] [PATCH 8/8] MX35: add support for flea3 board
Stefano Babic
- [U-Boot] [PATCH 8/8] MX35: add support for flea3 board
Stefano Babic
- [U-Boot] [PATCH 8/9] powerpc/mpc8548cds: Fix config according to system address map
Zhao Chenhui
- [U-Boot] [PATCH 9/13] mx51evk: Place machine ID into board config
Stefano Babic
- [U-Boot] [PATCH 9/13] mx51evk: Place machine ID into board config
Fabio Estevam
- [U-Boot] [PATCH 9/9] OMAP3: Remove legacy mmc driver
Andy Fleming
- [U-Boot] [PATCH 9/9] OMAP3: Remove legacy mmc driver
Rini, Tom
- [U-Boot] [PATCH 9/9] powerpc/mpc8548cds: Add 36-bit support
Zhao Chenhui
- [U-Boot] [PATCH RFC 0/4] Reworking of env
Gerlando Falauto
- [U-Boot] [PATCH RFC 1/3] nand: Remove static modifier from common functions
Simon Schwarz
- [U-Boot] [PATCH RFC 1/4] Groundwork for generalization of env interface
Gerlando Falauto
- [U-Boot] [PATCH RFC 2/3] nand: Add common functions to nand.h
Simon Schwarz
- [U-Boot] [PATCH RFC 2/4] env: check and apply changes on delete/destroy
Gerlando Falauto
- [U-Boot] [PATCH RFC 3/3] Fix regression in SMDK6400
Simon Schwarz
- [U-Boot] [PATCH RFC 3/4] env: implement selective "env default"
Gerlando Falauto
- [U-Boot] [PATCH RFC 4/4] env: implement "env import -n var[, var...]"
Gerlando Falauto
- [U-Boot] [PATCH RFC 4/4] env: implement "env import -n var[, var...]"
Mike Frysinger
- [U-Boot] [PATCH RFC] Add general nand functions
Simon Schwarz
- [U-Boot] [PATCH RFC] Add general nand functions
Simon Schwarz
- [U-Boot] [PATCH RFC] Add general nand functions
Scott Wood
- [U-Boot] [PATCH RFC] Add general nand functions
Simon Schwarz
- [U-Boot] [PATCH RFC] Add general nand functions
Scott Wood
- [U-Boot] [PATCH RFC] Add general nand functions
Simon Schwarz
- [U-Boot] [PATCH RFC] Add general nand functions
Scott Wood
- [U-Boot] [PATCH RFC] Add general nand functions
Simon Schwarz
- [U-Boot] [PATCH RFC] env: add command to set individual variables to default
Mike Frysinger
- [U-Boot] [PATCH RFC] env: add command to set individual variables to default
Gerlando Falauto
- [U-Boot] [PATCH v10 0/9] OMAP3 and devkit8000 SPL support
Tom Rini
- [U-Boot] [PATCH v10 1/9] omap-common/omap4: relocate early UART clock setup
Tom Rini
- [U-Boot] [PATCH v10 2/9] omap3: Configure RAM bank 0 if in SPL
Tom Rini
- [U-Boot] [PATCH v10 3/9] omap-common: add nand spl support
Tom Rini
- [U-Boot] [PATCH v10 4/9] spl: add NAND Library to new SPL
Tom Rini
- [U-Boot] [PATCH v10 5/9] spl: Add POWER library to new spl
Tom Rini
- [U-Boot] [PATCH v10 6/9] omap3: new SPL structure support
Tom Rini
- [U-Boot] [PATCH v10 7/9] devkit8000: Add nand-spl support for new SPL
Tom Rini
- [U-Boot] [PATCH v10 8/9] omap3: implement boot parameter saving
Tom Rini
- [U-Boot] [PATCH v10 9/9] omap-common: reorganize spl.c
Tom Rini
- [U-Boot] [PATCH v11 1/9] nds32: add header files support for nds32
Mike Frysinger
- [U-Boot] [PATCH v11 1/9] nds32: add header files support for nds32
Macpaul Lin
- [U-Boot] [PATCH v11 2/9] nds32: add NDS32 support into common header file
Macpaul Lin
- [U-Boot] [PATCH v11 3/9] nds32/core N1213: NDS32 N12 core family N1213
Mike Frysinger
- [U-Boot] [PATCH v11 3/9] nds32/core N1213: NDS32 N12 core family N1213
Mike Frysinger
- [U-Boot] [PATCH v11 3/9] nds32/core N1213: NDS32 N12 core family N1213
馬克泡
- [U-Boot] [PATCH v11 3/9] nds32/core N1213: NDS32 N12 core family N1213
Macpaul Lin
- [U-Boot] [PATCH v11 4/9] nds32/ag101: cpu and init funcs of SoC ag101
Macpaul Lin
- [U-Boot] [PATCH v11 5/9] nds32/lib: add generic funcs in NDS32 lib
Mike Frysinger
- [U-Boot] [PATCH v11 5/9] nds32/lib: add generic funcs in NDS32 lib
馬克泡
- [U-Boot] [PATCH v11 5/9] nds32/lib: add generic funcs in NDS32 lib
Mike Frysinger
- [U-Boot] [PATCH v11 5/9] nds32/lib: add generic funcs in NDS32 lib
Macpaul Lin
- [U-Boot] [PATCH v11 6/9] nds32: standalone support
Macpaul Lin
- [U-Boot] [PATCH v11 7/9] nds32: common bdinfo, bootm, image support
Macpaul Lin
- [U-Boot] [PATCH v11 8/9] adp-ag101: add board adp-ag101 support
Macpaul Lin
- [U-Boot] [PATCH v11 9/9] doc/README: documents and readme for NDS32 arch
Macpaul Lin
- [U-Boot] [PATCH v12 1/9] nds32: add header files support for nds32
Macpaul Lin
- [U-Boot] [PATCH v12 2/9] nds32: add NDS32 support into common header file
Macpaul Lin
- [U-Boot] [PATCH v12 3/9] nds32/core N1213: NDS32 N12 core family N1213
Macpaul Lin
- [U-Boot] [PATCH v12 4/9] nds32/ag101: cpu and init funcs of SoC ag101
Macpaul Lin
- [U-Boot] [PATCH v12 4/9] nds32/ag101: cpu and init funcs of SoC ag101
Mike Frysinger
- [U-Boot] [PATCH v12 4/9] nds32/ag101: cpu and init funcs of SoC ag101
馬克泡
- [U-Boot] [PATCH v12 4/9] nds32/ag101: cpu and init funcs of SoC ag101
馬克泡
- [U-Boot] [PATCH v12 5/9] nds32/lib: add generic funcs in NDS32 lib
Mike Frysinger
- [U-Boot] [PATCH v12 5/9] nds32/lib: add generic funcs in NDS32 lib
Macpaul Lin
- [U-Boot] [PATCH v12 6/9] nds32: standalone support
Macpaul Lin
- [U-Boot] [PATCH v12 7/9] nds32: common bdinfo, bootm, image support
Macpaul Lin
- [U-Boot] [PATCH v12 8/9] adp-ag101: add board adp-ag101 support
Macpaul Lin
- [U-Boot] [PATCH v12 8/9] adp-ag101: add board adp-ag101 support
Mike Frysinger
- [U-Boot] [PATCH v12 9/9] doc/README: documents and readme for NDS32 arch
Macpaul Lin
- [U-Boot] [PATCH v13 1/9] nds32: add header files support for nds32
馬克泡
- [U-Boot] [PATCH v13 1/9] nds32: add header files support for nds32
Macpaul Lin
- [U-Boot] [PATCH v13 2/9] nds32: add NDS32 support into common header file
Macpaul Lin
- [U-Boot] [PATCH v13 3/9] nds32/core N1213: NDS32 N12 core family N1213
Macpaul Lin
- [U-Boot] [PATCH v13 4/9] nds32/ag101: cpu and init funcs of SoC ag101
Macpaul Lin
- [U-Boot] [PATCH v13 5/9] nds32/lib: add generic funcs in NDS32 lib
Macpaul Lin
- [U-Boot] [PATCH v13 6/9] nds32: standalone support
Macpaul Lin
- [U-Boot] [PATCH v13 7/9] nds32: common bdinfo, bootm, image support
Macpaul Lin
- [U-Boot] [PATCH v13 8/9] adp-ag101: add board adp-ag101 support
Macpaul Lin
- [U-Boot] [PATCH v13 9/9] doc/README: documents and readme for NDS32 arch
Macpaul Lin
- [U-Boot] [PATCH v14 1/9] nds32: add header files support for nds32
Macpaul Lin
- [U-Boot] [PATCH v14 2/9] nds32: add NDS32 support into common header file
Macpaul Lin
- [U-Boot] [PATCH v14 3/9] nds32/core N1213: NDS32 N12 core family N1213
Macpaul Lin
- [U-Boot] [PATCH v14 4/9] nds32/ag101: cpu and init funcs of SoC ag101
Macpaul Lin
- [U-Boot] [PATCH v14 5/9] nds32/lib: add generic funcs in NDS32 lib
Macpaul Lin
- [U-Boot] [PATCH v14 6/9] nds32: standalone support
Macpaul Lin
- [U-Boot] [PATCH v14 7/9] nds32: common bdinfo, bootm, image support
Macpaul Lin
- [U-Boot] [PATCH v14 8/9] adp-ag101: add board adp-ag101 support
Macpaul Lin
- [U-Boot] [PATCH v14 9/9] doc/README: documents and readme for NDS32 arch
Macpaul Lin
- [U-Boot] [PATCH V1] part: show efi partition name when print out partition info
Lei Wen
- [U-Boot] [PATCH v2 0/4] Move ehci headers, add Efika USB support
Jana Rapava
- [U-Boot] [PATCH v2 0/6] tegra2: Add more clock/pinmux functionality
Simon Glass
- [U-Boot] [PATCH v2 0/6] tegra2: Add more clock/pinmux functionality
Albert ARIBAUD
- [U-Boot] [PATCH v2 0/6] tegra2: Add more clock/pinmux functionality
Simon Glass
- [U-Boot] [PATCH v2 0/6] tegra2: Add more clock/pinmux functionality
Simon Glass
- [U-Boot] [PATCH v2 0/8] POST: support for km_arm and mem_regions test definition
Valentin Longchamp
- [U-Boot] [PATCH v2 1/2] ARM: mx25: Print the silicon revison
Fabio Estevam
- [U-Boot] [PATCH v2 1/2] ARM: mx25: Print the silicon revison
Fabio Estevam
- [U-Boot] [PATCH v2 1/2] ARM: mx25: Print the silicon revison
Stefano Babic
- [U-Boot] [PATCH v2 1/2] ARM: mx25: Print the silicon revison
Stefano Babic
- [U-Boot] [PATCH v2 1/2] MX25: tx25: Avoid the usage of extern in C file
Stefano Babic
- [U-Boot] [PATCH v2 1/2] MX25: tx25: Avoid the usage of extern in C file
Stefano Babic
- [U-Boot] [PATCH v2 1/2] omap3+: Add OMAP support for cmd_gpio
Joe Hershberger
- [U-Boot] [PATCH v2 1/2] omap3+: Add OMAP support for cmd_gpio
Paulraj, Sandeep
- [U-Boot] [PATCH v2 1/2] omap3+: Add OMAP support for cmd_gpio
Joe Hershberger
- [U-Boot] [PATCH v2 1/3] image: add support for Android's boot image format
Sebastian Andrzej Siewior
- [U-Boot] [PATCH V2 1/3] mkimage: ublimage must return if the header is not verified
Stefano Babic
- [U-Boot] [PATCH v2 1/3] omap4: factor out common part from board config headers
Aneesh V
- [U-Boot] [PATCH v2 1/4] SPI: Add SPI driver support for Marvell Armada100
Ajay Bhargav
- [U-Boot] [PATCH V2 1/4] VIDEO: MX5: Switch MX5 to CONFIG_VIDEO
Stefano Babic
- [U-Boot] [PATCH v2 1/6] tegra2: Rename CLOCK_PLL_ID to CLOCK_ID
Simon Glass
- [U-Boot] [PATCH v2 1/7] Add bootgraph.pl script for generating a boot graph SVG file
Andrew Murray
- [U-Boot] [Patch v2 1/7] powerpc/mpc8xxx: Fix DDR code for empty first DIMM slot and enable DQS_en
Kumar Gala
- [U-Boot] [PATCH v2 1/8] POST/arm: adaptations needed for POST on ARM to work
Mike Frysinger
- [U-Boot] [PATCH v2 1/8] POST/arm: adaptations needed for POST on ARM to work
Valentin Longchamp
- [U-Boot] [PATCH v2 1/8] POST/arm: adaptations needed for POST on ARM to work
Valentin Longchamp
- [U-Boot] [PATCH v2 2/2] ARM: mx25: Print the source of reset
Fabio Estevam
- [U-Boot] [PATCH v2 2/2] ARM: mx25: Print the source of reset
Stefano Babic
- [U-Boot] [PATCH v2 2/2] SPL: omap4: Reduce the maximum size of SPL to 32K bytes.
sricharan
- [U-Boot] [PATCH v2 2/3] omap4: make SDRAM init work for ES1.0 silicon
Aneesh V
- [U-Boot] [PATCH v2 2/3] usb/gadget: add the fastboot gadget
Sebastian Andrzej Siewior
- [U-Boot] [PATCH v2 2/4] Armada100: Add SPI support for Marvell gplugD
Ajay Bhargav
- [U-Boot] [PATCH V2 2/4] VIDEO: MX5: export pix format
Stefano Babic
- [U-Boot] [PATCH V2 2/4] VIDEO: MX5: export pix format
Marek Vasut
- [U-Boot] [PATCH v2 2/6] tegra2: Clean up board code a little
Simon Glass
- [U-Boot] [PATCH v2 2/7] Add macros for recording init calls during UBoot execution
Mike Frysinger
- [U-Boot] [PATCH v2 2/7] Add macros for recording init calls during UBoot execution
Andrew Murray
- [U-Boot] [PATCH v2 2/7] Add macros for recording init calls during UBoot execution
Andrew Murray
- [U-Boot] [Patch v2 2/7] powerpc/mpc8xxx: Add SPD EEPROM address for single controller 2 slots
Kumar Gala
- [U-Boot] [PATCH v2 2/8] POST: add post_log_res field for post results in global data
Valentin Longchamp
- [U-Boot] [PATCH v2 2/8] POST: add post_log_res field for post results in global data
Mike Frysinger
- [U-Boot] [PATCH v2 2/8] POST: add post_log_res field for post results in global data
Graeme Russ
- [U-Boot] [PATCH v2 3/3] omap4: IO settings
Aneesh V
- [U-Boot] [PATCH v2 3/4] Armada100: Add SPI flash support for Marvell gplugD
Ajay Bhargav
- [U-Boot] [PATCH V2 3/4] MX5: Switch vision2 to CONFIG_VIDEO
Stefano Babic
- [U-Boot] [PATCH v2 3/6] tegra2: Add more clock functions
Simon Glass
- [U-Boot] [PATCH v2 3/7] Add timing information to printf's for use with bootgraph.pl
Mike Frysinger
- [U-Boot] [PATCH v2 3/7] Add timing information to printf's for use with bootgraph.pl
Andrew Murray
- [U-Boot] [Patch v2 3/7] powerpc/mpc8xxx: Fix picos_to_mclk() and get_memory_clk_period_ps()
Kumar Gala
- [U-Boot] [PATCH v2 3/8] POST: make env test flags fetching optional
Mike Frysinger
- [U-Boot] [PATCH v2 3/8] POST: make env test flags fetching optional
Valentin Longchamp
- [U-Boot] [PATCH v2 4/4] Armada100: Add env storage support for Marvell gplugD
Ajay Bhargav
- [U-Boot] [PATCH V2 4/4] MX5: Make IPU display output and pixel format configurable
Stefano Babic
- [U-Boot] [PATCH V2 4/4] MX5: Make IPU display output and pixel format configurable
Marek Vasut
- [U-Boot] [PATCH v2 4/4] powerpc/mpc83xx: Cleanup usage of LBC constants
Kim Phillips
- [U-Boot] [PATCH v2 4/4] usb: add USB support for Efika
Jana Rapava
- [U-Boot] [PATCH v2 4/4] usb: add USB support for Efika
Marek Vasut
- [U-Boot] [PATCH v2 4/6] tegra2: Rename PIN_ to PINGRP_
Simon Glass
- [U-Boot] [PATCH v2 4/7] Add bootgraph instrumentation for ARM boards
Mike Frysinger
- [U-Boot] [PATCH v2 4/7] Add bootgraph instrumentation for ARM boards
Andrew Murray
- [U-Boot] [Patch v2 4/7] powerpc/mpc8xxx: Add DDR2 to unified DDR driver
Kumar Gala
- [U-Boot] [PATCH v2 4/8] POST: drivers/memory.c coding style cleanup
Valentin Longchamp
- [U-Boot] [PATCH v2 5/6] tegra2: Add more pinmux functions
Simon Glass
- [U-Boot] [PATCH v2 5/7] Add bootgraph instrumentation for bootm command
Andrew Murray
- [U-Boot] [Patch v2 5/7] powerpc/mpc83xx: Migrate from spd_sdram to unified DDR driver
Kumar Gala
- [U-Boot] [PATCH v2 5/8] POST: add new memory regions test
Valentin Longchamp
- [U-Boot] [PATCH v2 5/8] POST: add new memory regions test
Mike Frysinger
- [U-Boot] [PATCH v2 6/6] tegra2: Enable MMC for Seaboard
Simon Glass
- [U-Boot] [PATCH v2 6/7] Add bootgraph instrumentation for UBoot commands
Andrew Murray
- [U-Boot] [PATCH v2 6/7] Add bootgraph instrumentation for UBoot commands
Mike Frysinger
- [U-Boot] [Patch v2 6/7] powerpc/mpc8349emds: Migrate from spd_sdram to unified DDR driver
Kumar Gala
- [U-Boot] [PATCH v2 6/8] POST/km_arm: add POST memory tests infrastructure
Valentin Longchamp
- [U-Boot] [PATCH v2 6/8] POST/km_arm: add POST memory tests infrastructure
Mike Frysinger
- [U-Boot] [PATCH v2 6/8] POST/km_arm: add POST memory tests infrastructure
Valentin Longchamp
- [U-Boot] [PATCH v2 6/8] POST/km_arm: add POST memory tests infrastructure
Mike Frysinger
- [U-Boot] [PATCH v2 7/7] Add documentation for bootgraph.pl
Andrew Murray
- [U-Boot] [Patch v2 7/7] powerpc/8xxx: Add support for interactive DDR programming interface
Kumar Gala
- [U-Boot] [PATCH v2 7/8] km_arm: change CONFIG_SYS_TEXT_BASE to end of RAM
Valentin Longchamp
- [U-Boot] [PATCH v2 8/8] arm, davinci: add support for am1808 based enbw_cmc board
Heiko Schocher
- [U-Boot] [PATCH v2 8/8] arm, davinci: add support for am1808 based enbw_cmc board
Paulraj, Sandeep
- [U-Boot] [PATCH v2 8/8] arm, davinci: add support for am1808 based enbw_cmc board
Heiko Schocher
- [U-Boot] [PATCH v2 8/8] arm, davinci: add support for am1808 based enbw_cmc board
Paulraj, Sandeep
- [U-Boot] [PATCH v2 8/8] arm, davinci: add support for am1808 based enbw_cmc board
Heiko Schocher
- [U-Boot] [PATCH v2 8/8] arm, davinci: add support for am1808 based enbw_cmc board
Albert ARIBAUD
- [U-Boot] [PATCH v2 8/8] arm, davinci: add support for am1808 based enbw_cmc board
Christian Riesch
- [U-Boot] [PATCH v2 8/8] arm, davinci: add support for am1808 based enbw_cmc board
Heiko Schocher
- [U-Boot] [PATCH v2 8/8] arm, davinci: add support for am1808 based enbw_cmc board
Christian Riesch
- [U-Boot] [PATCH v2 8/8] arm, davinci: add support for am1808 based enbw_cmc board
Heiko Schocher
- [U-Boot] [PATCH v2 8/8] km_arm: enable POST for these boards
Valentin Longchamp
- [U-Boot] [PATCH V2 8/8] MX35: add support for flea3 board
Stefano Babic
- [U-Boot] [PATCH v2] [COSMETIC] board/prodrive/alpr/fpga.c: Coding style cleanup
Stefan Roese
- [U-Boot] [PATCH v2] [COSMETIC] board/prodrive/alpr/fpga.c: Coding style cleanup
Wolfgang Denk
- [U-Boot] [PATCH v2] [COSMETIC] board/prodrive/alpr/fpga.c: Coding style cleanup
Wolfgang Denk
- [U-Boot] [PATCH v2] add dm9000 eeprom read/write command
Eric Jarrige
- [U-Boot] [PATCH v2] add dm9000 eeprom read/write command
Stefano Babic
- [U-Boot] [PATCH v2] Add support for IDS8313 boards
Sergej.Stepanov at ids.de
- [U-Boot] [PATCH v2] Add support for IDS8313 boards
Heiko Schocher
- [U-Boot] [PATCH v2] Add support for IDS8313 boards
Wolfgang Denk
- [U-Boot] [PATCH v2] Add support for IDS8313 boards
Jason
- [U-Boot] [PATCH V2] arm: Add Prep subcommand support to bootm
Simon Schwarz
- [U-Boot] [PATCH V2] ARM: hawkboard_nand: fix compilation of nand_spl
Albert ARIBAUD
- [U-Boot] [PATCH V2] ARM: hawkboard_nand: fix compilation of nand_spl
Wolfgang Denk
- [U-Boot] [PATCH V2] ARM: hawkboard_nand: fix compilation of nand_spl
Stefano Babic
- [U-Boot] [PATCH V2] ARM: remove broken "ixpg425" and "ixpg425" boards
Albert ARIBAUD
- [U-Boot] [PATCH V2] ARM: remove broken "ixpg425" and "ixpg425" boards
Albert ARIBAUD
- [U-Boot] [PATCH V2] ARM: Update mach-types
Marek Vasut
- [U-Boot] [PATCH V2] ARM: Update mach-types
Igor Grinberg
- [U-Boot] [PATCH V2] ARM: Update mach-types
Marek Vasut
- [U-Boot] [PATCH V2] ARM: Update mach-types
Stefano Babic
- [U-Boot] [PATCH V2] ARM: Update mach-types
Holger Brunck
- [U-Boot] [PATCH V2] ARM: Update mach-types
Marek Vasut
- [U-Boot] [PATCH V2] ARM: Update mach-types
Jason
- [U-Boot] [PATCH V2] ARM: Update mach-types
Stefano Babic
- [U-Boot] [PATCH V2] ARM: Update mach-types
Holger Brunck
- [U-Boot] [PATCH V2] ARM: Update mach-types
Stefano Babic
- [U-Boot] [PATCH V2] ARM: Update mach-types
Nick Thompson
- [U-Boot] [PATCH V2] ARM: Update mach-types
Valentin Longchamp
- [U-Boot] [PATCH V2] ARM: Update mach-types
Stefano Babic
- [U-Boot] [PATCH V2] ARM: Update mach-types
Nick Thompson
- [U-Boot] [PATCH V2] ARM: Update mach-types
Marek Vasut
- [U-Boot] [PATCH V2] ARM: Update mach-types
Marek Vasut
- [U-Boot] [PATCH V2] ARM: Update mach-types
Wolfgang Denk
- [U-Boot] [PATCH V2] ARM: Update mach-types
Igor Grinberg
- [U-Boot] [PATCH V2] ARM: Update mach-types
Prafulla Wadaskar
- [U-Boot] [PATCH V2] ATA: Squash warnings in mxc_ata.
Marek Vasut
- [U-Boot] [PATCH V2] ATA: Squash warnings in mxc_ata.
Stefano Babic
- [U-Boot] [PATCH v2] BeagleBoard: Remove userbutton command and use gpio command instead
Joel A Fernandes
- [U-Boot] [PATCH v2] BeagleBoard: Remove userbutton command and use gpio command instead
Jason Kridner
- [U-Boot] [PATCH v2] BeagleBoard: Remove userbutton command and use gpio command instead
Joel A Fernandes
- [U-Boot] [PATCH v2] da830: add support for NAND boot mode
nagabhushana.netagunte at ti.com
- [U-Boot] [PATCH v2] da850evm: Move LPSC configuration to board_early_init_f()
Christian Riesch
- [U-Boot] [PATCH v2] DaVinci: correct MDSTAT.STATE mask
Sergei Shtylyov
- [U-Boot] [PATCH v2] DaVinci: correct MDSTAT.STATE mask
Wolfgang Denk
- [U-Boot] [PATCH v2] DaVinci: correct MDSTAT.STATE mask
Sergei Shtylyov
- [U-Boot] [PATCH v2] feature additions and fixes for da830
nagabhushana.netagunte at ti.com
- [U-Boot] [PATCH V2] FEC: Allow multiple FECes
Marek Vasut
- [U-Boot] [PATCH V2] FEC: Allow multiple FECes
Stefano Babic
- [U-Boot] [PATCH v2] fix compile warning for env tools
Luka Perkov
- [U-Boot] [PATCH v2] fix compile warning for env tools
Mike Frysinger
- [U-Boot] [PATCH v2] FPGA: constify Lattice FPGA code
Wolfgang Denk
- [U-Boot] [PATCH V2] I2C: Add i2c_get/set_speed() to mxc_i2c.c
Marek Vasut
- [U-Boot] [PATCH V2] I2C: Add i2c_get/set_speed() to mxc_i2c.c
Heiko Schocher
- [U-Boot] [PATCH V2] I2C: Add i2c_get/set_speed() to mxc_i2c.c
Stefano Babic
- [U-Boot] [PATCH v2] image: push default arch values to arch headers
Thomas Chou
- [U-Boot] [PATCH v2] image: push default arch values to arch headers
Mike Frysinger
- [U-Boot] [PATCH v2] mkconfig: start deprecating Makefile config targets
Mike Frysinger
- [U-Boot] [PATCH v2] mkconfig: start deprecating Makefile config targets
Wolfgang Denk
- [U-Boot] [PATCH v2] mkconfig: start deprecating Makefile config targets
Mike Frysinger
- [U-Boot] [PATCH v2] mkconfig: start deprecating Makefile config targets
Wolfgang Denk
- [U-Boot] [PATCH v2] MX31: Disable watchdog during low-power modes
Fabio Estevam
- [U-Boot] [PATCH V2] mx31: provide readable WEIM CS accessor
Helmut Raiger
- [U-Boot] [PATCH V2] MX5: Make IPU display output and pixel format configurable
Stefano Babic
- [U-Boot] [PATCH V2] MX5: Make IPU display output and pixel format configurable
Marek Vasut
- [U-Boot] [PATCH V2] MX5: Make IPU display output and pixel format configurable
Stefano Babic
- [U-Boot] [PATCH V2] MX5: Make IPU display output and pixel format configurable
Marek Vasut
- [U-Boot] [PATCH V2] MX5: Make IPU display output and pixel format configurable
Marek Vasut
- [U-Boot] [PATCH v2] NAND: davinci: choose correct 1-bit h/w ECC reg
Laurence Withers
- [U-Boot] [PATCH v2] net, davinci_emac: add KSZ8864 switch
Heiko Schocher
- [U-Boot] [PATCH v2] net, davinci_emac: add KSZ8864 switch
Paulraj, Sandeep
- [U-Boot] [PATCH v2] net: axi_ethernet: Add driver to u-boot
Michal Simek
- [U-Boot] [PATCH v2] net: axi_ethernet: Add driver to u-boot
Wolfgang Denk
- [U-Boot] [PATCH v2] net: axi_ethernet: Add driver to u-boot
Michal Simek
- [U-Boot] [PATCH v2] net: Check network device driver name
Mike Frysinger
- [U-Boot] [PATCH v2] net: Check network device driver name
Michal Simek
- [U-Boot] [PATCH v2] net: Check network device driver name
Wolfgang Denk
- [U-Boot] [PATCH v2] net: emaclite: Use dynamic allocation
Michal Simek
- [U-Boot] [PATCH v2] net: emaclite: Use dynamic allocation
Mike Frysinger
- [U-Boot] [PATCH v2] net: emaclite: Use dynamic allocation
Michal Simek
- [U-Boot] [PATCH v2] net: ll_temac: Add LL TEMAC driver to u-boot
Michal Simek
- [U-Boot] [PATCH v2] net: ll_temac: Add LL TEMAC driver to u-boot
Michal Simek
- [U-Boot] [PATCH v2] OMAP3: Overo: Update GPMC timing for ethernet chip.
Paulraj, Sandeep
- [U-Boot] [PATCH v2] OMAP3: Overo: Update GPMC timing for ethernet chip.
Enric Balletbò i Serra
- [U-Boot] [PATCH v2] OMAP3: Overo: Update GPMC timing for ethernet chip.
Philip Balister
- [U-Boot] [PATCH v2] OMAP3: Overo: Update GPMC timing for ethernet chip.
Philip Balister
- [U-Boot] [PATCH v2] OMAP3: Overo: Update GPMC timing for ethernet chip.
Jason Kridner
- [U-Boot] [PATCH v2] OMAP3: Overo: Update GPMC timing for ethernet chip.
Philip Balister
- [U-Boot] [PATCH v2] OMAP3: Overo: Update GPMC timing for ethernet chip.
Paulraj, Sandeep
- [U-Boot] [PATCH v2] omap3evm: Set environment variable 'ethaddr'
Sanjeev Premi
- [U-Boot] [PATCH v2] omap4: update maintainer for omap4 boards
Aneesh V
- [U-Boot] [PATCH v2] omap4: update maintainer for omap4 boards
Paulraj, Sandeep
- [U-Boot] [PATCH v2] OMAP: Remove omapfb.debug=y from Beagle and Overo env settings
Albert ARIBAUD
- [U-Boot] [PATCH v2] OMAP: Remove omapfb.debug=y from Beagle and Overo env settings
Paulraj, Sandeep
- [U-Boot] [PATCH v2] ORIGEN : use absolute paths and fix tool naming
Minkyu Kang
- [U-Boot] [PATCH v2] ORIGEN : use absolute paths and fix tool naming
Angus Ainslie
- [U-Boot] [PATCH V2] part: show efi partition name when print out partition info
Wolfgang Denk
- [U-Boot] [PATCH V2] part: show efi partition name when print out partition info
Lei Wen
- [U-Boot] [PATCH v2] powerpc/85xx: Add support for setting up RAID engine liodns on P5020
Kumar Gala
- [U-Boot] [PATCH v2] powerpc/mpc83xx: Rename CONFIG_SYS_DDR_CONFIG and cleanup DDR csbnds code
Kim Phillips
- [U-Boot] [PATCH v2] powerpc/mpc85xxcds: Fix PCI speed
Zhao Chenhui
- [U-Boot] [PATCH v2] powerpc/p3060qds: Add board related support for P3060QDS platform
Kumar Gala
- [U-Boot] [PATCH v2] serial: uartlite: Support for SERIAL_MULTI
Michal Simek
- [U-Boot] [PATCH v2] serial: uartlite: Support for SERIAL_MULTI
Michal Simek
- [U-Boot] [PATCH v2] Small refactor to remove duplicate serial code
Mike Frysinger
- [U-Boot] [PATCH v2] Small refactor to remove duplicate serial code
Simon Glass
- [U-Boot] [PATCH v2] tegra2: Enable data cache
Simon Glass
- [U-Boot] [PATCH v2] UBIFS: Change ubifsload to set the filesize variable
Bastian Ruppert
- [U-Boot] [PATCH v2] UBIFS: Change ubifsload to set the filesize variable
Detlev Zundel
- [U-Boot] [PATCH v2] UBIFS: Change ubifsload to set the filesize variable
Wolfgang Denk
- [U-Boot] [PATCH V2] USB: Add functionality to poll the USB keyboard via control EP
Marek Vasut
- [U-Boot] [PATCH V2] USB: Add usb_event_poll() to get keyboards working with EHCI
Marek Vasut
- [U-Boot] [PATCH v2] zmx25: Fix build warning due to 'get_reset_cause' defined but not used
Fabio Estevam
- [U-Boot] [PATCH v2] zmx25: Fix build warning due to 'get_reset_cause' defined but not used
Stefano Babic
- [U-Boot] [PATCH v3 0/21] New 'sandbox' test architecture for U-Boot
Simon Glass
- [U-Boot] [PATCH v3 0/2] usb:gadget:s5p USB Device Controller (UDC) implementation
Remy Bohmer
- [U-Boot] [PATCH v3 0/2] usb:gadget:s5p USB Device Controller (UDC) implementation
Lukasz Majewski
- [U-Boot] [PATCH v3 0/2] usb:gadget:s5p USB Device Controller (UDC) implementation
Lukasz Majewski
- [U-Boot] [PATCH v3 0/8] POST: support for km_arm and mem_regions test definition
Valentin Longchamp
- [U-Boot] [PATCH v3 01/21] sandbox: Add architecture header files
Simon Glass
- [U-Boot] [PATCH v3 02/21] Fix use of int as pointer in image.c
Simon Glass
- [U-Boot] [PATCH v3 03/21] sandbox: Add architecture image support
Simon Glass
- [U-Boot] [PATCH v3 04/21] sandbox: Add compiler defines to support a 64-bit x86_64 platform
Simon Glass
- [U-Boot] [PATCH v3 05/21] sandbox: Add cpu files
Simon Glass
- [U-Boot] [PATCH v3 06/21] sandbox: Add architecture lib files
Simon Glass
- [U-Boot] [PATCH v3 07/21] sandbox: Add sandbox board
Simon Glass
- [U-Boot] [PATCH v3 08/21] sandbox: Add board info for architecture
Simon Glass
- [U-Boot] [PATCH v3 09/21] sandbox: Add bootm support
Simon Glass
- [U-Boot] [PATCH v3 1/2] MX25: tx25: Avoid the usage of extern in C file
Stefano Babic
- [U-Boot] [PATCH v3 1/2] MX25: tx25: Avoid the usage of extern in C file
Marek Vasut
- [U-Boot] [PATCH v3 1/2] MX25: tx25: Avoid the usage of extern in C file
Marek Vasut
- [U-Boot] [PATCH v3 1/2] MX25: tx25: Avoid the usage of extern in C file
Marek Vasut
- [U-Boot] [PATCH v3 1/2] MX25: tx25: Avoid the usage of extern in C file
Wolfgang Denk
- [U-Boot] [PATCH v3 1/2] MX25: tx25: Avoid the usage of extern in C file
Marek Vasut
- [U-Boot] [PATCH v3 1/2] MX25: tx25: Avoid the usage of extern in C file
Fabio Estevam
- [U-Boot] [PATCH v3 1/2] MX25: tx25: Avoid the usage of extern in C file
Fabio Estevam
- [U-Boot] [PATCH v3 1/2] MX25: tx25: Avoid the usage of extern in C file
Fabio Estevam
- [U-Boot] [PATCH v3 1/2] MX25: tx25: Avoid the usage of extern in C file
Fabio Estevam
- [U-Boot] [PATCH v3 1/2] MX25: tx25: Avoid the usage of extern in C file
Fabio Estevam
- [U-Boot] [PATCH v3 1/2] MX25: tx25: Avoid the usage of extern in C file
Stefano Babic
- [U-Boot] [PATCH v3 1/2] usb:gadget:s5p USB Device Controller (UDC) implementation
Lukasz Majewski
- [U-Boot] [PATCH v3 1/3] ids8313: add support for IDS8313 boards
Sergej.Stepanov at ids.de
- [U-Boot] [PATCH v3 1/3] omap4: factor out common part from board config headers
Aneesh V
- [U-Boot] [PATCH v3 1/8] POST/arm: adaptations needed for POST on ARM to work
Mike Frysinger
- [U-Boot] [PATCH v3 1/8] POST/arm: adaptations needed for POST on ARM to work
Valentin Longchamp
- [U-Boot] [PATCH v3 10/21] sandbox: Disable built-in malloc
Simon Glass
- [U-Boot] [PATCH v3 11/21] sandbox: Disable standalone/API support
Simon Glass
- [U-Boot] [PATCH v3 12/21] sandbox: Force command sections to be 4-byte aligned
Simon Glass
- [U-Boot] [PATCH v3 13/21] sandbox: Add OS dependent layer
Simon Glass
- [U-Boot] [PATCH v3 14/21] sandbox: Add board_init()
Simon Glass
- [U-Boot] [PATCH v3 15/21] sandbox: Add main program
Simon Glass
- [U-Boot] [PATCH v3 16/21] sandbox: Add serial uart
Simon Glass
- [U-Boot] [PATCH v3 17/21] sandbox: Add basic config file
Simon Glass
- [U-Boot] [PATCH v3 18/21] Remove unused variable warnings in cmd_mem, cmd_nvedit
Simon Glass
- [U-Boot] [PATCH v3 19/21] Use uintptr_t for 32/64-bit compatibility
Simon Glass
- [U-Boot] [PATCH v3 2/2] MX25: Add initial support for MX25PDK
Fabio Estevam
- [U-Boot] [PATCH v3 2/2] usb:gadget:s5p Enabling the USB Gadget framework at GONI
Lukasz Majewski
- [U-Boot] [PATCH v3 2/3] ids8313: add related support for IDS8313 boards
Sergej.Stepanov at ids.de
- [U-Boot] [PATCH v3 2/3] omap4: make SDRAM init work for ES1.0 silicon
Aneesh V
- [U-Boot] [PATCH v3 2/8] POST: allow redefinition of post_word_load/store
Valentin Longchamp
- [U-Boot] [PATCH v3 20/21] Adjust dependency rules to permit per-file flags
Simon Glass
- [U-Boot] [PATCH v3 21/21] sandbox: Makefile changes to build sandbox architecture
Simon Glass
- [U-Boot] [PATCH v3 3/3] ids8313: add configuration for IDS8313 boards
Sergej.Stepanov at ids.de
- [U-Boot] [PATCH v3 3/3] omap4: IO settings
Aneesh V
- [U-Boot] [PATCH v3 3/8] POST: add post_log_res field for post results in global data
Valentin Longchamp
- [U-Boot] [PATCH v3 4/4] usb: add USB support for Efika
Jana Rapava
- [U-Boot] [PATCH v3 4/4] usb: add USB support for Efika
Marek Vasut
- [U-Boot] [PATCH v3 4/8] POST: make env test flags fetching optional
Valentin Longchamp
- [U-Boot] [PATCH v3 5/7]Timer: Remove reset_timer() for non-Nios2 arches
Wolfgang Denk
- [U-Boot] [PATCH v3 5/8] POST: drivers/memory.c coding style cleanup
Valentin Longchamp
- [U-Boot] [PATCH v3 6/8] POST: add new memory regions test
Valentin Longchamp
- [U-Boot] [PATCH v3 6/8] POST: add new memory regions test
Mike Frysinger
- [U-Boot] [Patch v3 7/7] powerpc/8xxx: Add support for interactive DDR programming interface
York Sun
- [U-Boot] [PATCH v3 7/8] km_arm: change CONFIG_SYS_TEXT_BASE to end of RAM
Heiko Schocher
- [U-Boot] [PATCH v3 7/8] km_arm: change CONFIG_SYS_TEXT_BASE to endof RAM
Valentin Longchamp
- [U-Boot] [PATCH v3 7/8] km_arm: change CONFIG_SYS_TEXT_BASE to end of RAM
Valentin Longchamp
- [U-Boot] [PATCH v3 8/8] km_arm: enable POST for these boards
Valentin Longchamp
- [U-Boot] [PATCH V3 8/8] MX35: add support for flea3 board
Stefano Babic
- [U-Boot] [PATCH V3+] I2C: mxc_i2c rework
Marek Vasut
- [U-Boot] [PATCH V3+] I2C: mxc_i2c rework
Jason Hui
- [U-Boot] [PATCH V3+] I2C: mxc_i2c rework
Marek Vasut
- [U-Boot] [PATCH V3+] I2C: mxc_i2c rework
Jason Hui
- [U-Boot] [PATCH V3+] I2C: mxc_i2c rework
Marek Vasut
- [U-Boot] [PATCH v3] Add assert() for debug assertions
Simon Glass
- [U-Boot] [PATCH v3] Add assert() for debug assertions
Mike Frysinger
- [U-Boot] [PATCH v3] Add assert() for debug assertions
Simon Glass
- [U-Boot] [PATCH v3] Add assert() for debug assertions
Wolfgang Denk
- [U-Boot] [PATCH v3] Add USB support for Efika
Jana Rapava
- [U-Boot] [PATCH v3] Add USB support for Efika
Marek Vasut
- [U-Boot] [PATCH v3] Add USB support for Efika
Stefano Babic
- [U-Boot] [PATCH v3] Add USB support for Efika
Marek Vasut
- [U-Boot] [PATCH v3] Add USB support for Efika
Marek Vasut
- [U-Boot] [PATCH v3] Add USB support for Efika
Remy Bohmer
- [U-Boot] [PATCH v3] Add USB support for Efika
Fabio Estevam
- [U-Boot] [PATCH v3] Add USB support for Efika
Marek Vasut
- [U-Boot] [PATCH v3] Add USB support for Efika
Fabio Estevam
- [U-Boot] [PATCH V3] arm: Add Prep subcommand support to bootm
Simon Schwarz
- [U-Boot] [PATCH V3] ATA: Squash warnings in mxc_ata.
Marek Vasut
- [U-Boot] [PATCH V3] ATA: Squash warnings in mxc_ata.
Stefano Babic
- [U-Boot] [PATCH v3] DaVinci: correct MDSTAT.STATE mask
Sergei Shtylyov
- [U-Boot] [PATCH V3] Makefile : fix generation of cpu related asm-offsets.h
Wolfgang Denk
- [U-Boot] [PATCH V3] Makefile : fix generation of cpu related asm-offsets.h
Wolfgang Denk
- [U-Boot] [PATCH V3] Makefile : fix generation of cpu related asm-offsets.h
Stefano Babic
- [U-Boot] [PATCH V3] mx31: provide readable WEIM CS accessor
Helmut Raiger
- [U-Boot] [PATCH V3] mx31: provide readable WEIM CS accessor
Helmut Raiger
- [U-Boot] [PATCH V3] mx31: provide readable WEIM CS accessor
Stefano Babic
- [U-Boot] [PATCH v3] net: axi_ethernet: Add driver to u-boot
Michal Simek
- [U-Boot] [PATCH v3] net: axi_ethernet: Add driver to u-boot
Michal Simek
- [U-Boot] [PATCH v3] net: ll_temac: Add LL TEMAC driver to u-boot
Michal Simek
- [U-Boot] [PATCH v3] net: ll_temac: Add LL TEMAC driver to u-boot
Wolfgang Denk
- [U-Boot] [PATCH v3] net: ll_temac: Add LL TEMAC driver to u-boot
Michal Simek
- [U-Boot] [PATCH v3] net: ll_temac: Add LL TEMAC driver to u-boot
Wolfgang Denk
- [U-Boot] [PATCH v3] net: ll_temac: Add LL TEMAC driver to u-boot
Michal Simek
- [U-Boot] [PATCH v3] net: ll_temac: Add LL TEMAC driver to u-boot
Wolfgang Denk
- [U-Boot] [PATCH v3] net: ll_temac: Add LL TEMAC driver to u-boot
Michal Simek
- [U-Boot] [PATCH v3] net: ll_temac: Add LL TEMAC driver to u-boot
Wolfgang Denk
- [U-Boot] [PATCH v3] net: ll_temac: Add LL TEMAC driver to u-boot
Michal Simek
- [U-Boot] [PATCH v3] net: ll_temac: Add LL TEMAC driver to u-boot
Wolfgang Denk
- [U-Boot] [PATCH v3] net: ll_temac: Add LL TEMAC driver to u-boot
Michal Simek
- [U-Boot] [PATCH v3] net: ll_temac: Add LL TEMAC driver to u-boot
Wolfgang Denk
- [U-Boot] [PATCH v3] net: ll_temac: Add LL TEMAC driver to u-boot
Michal Simek
- [U-Boot] [PATCH v3] net: ll_temac: Add LL TEMAC driver to u-boot
Wolfgang Denk
- [U-Boot] [PATCH v3] ns16550: change to allow 32 bit access to registers
Dave Aldridge
- [U-Boot] [PATCH v3] ns16550: change to allow 32 bit access to registers
Wolfgang Denk
- [U-Boot] [PATCH v3] ns16550: change to allow 32 bit access to registers
Detlev Zundel
- [U-Boot] [PATCH v3] ns16550: change to allow 32 bit access to registers
Tabi Timur-B04825
- [U-Boot] [PATCH v3] ns16550: change to allow 32 bit access to registers
Dave Aldridge
- [U-Boot] [PATCH v3] ns16550: change to allow 32 bit access to registers
Dave Aldridge
- [U-Boot] [PATCH v3] ns16550: change to allow 32 bit access to registers
Dave Aldridge
- [U-Boot] [PATCH V3] part: show efi partition name when print out partition info
Marek Vasut
- [U-Boot] [PATCH V3] part: show efi partition name when print out partition info
Lei Wen
- [U-Boot] [PATCH V3] part: show efi partition name when print out partition info
Lei Wen
- [U-Boot] [PATCH V3] part: show efi partition name when print out partition info
Lei Wen
- [U-Boot] [PATCH v3] zmx25: Fix build warning due to 'get_reset_cause' defined but not used
Fabio Estevam
- [U-Boot] [PATCH v3] zmx25: Fix build warning due to 'get_reset_cause' defined but not used
Stefano Babic
- [U-Boot] [PATCH v4 0/4] Add basic clock and pinmux functions to the Tegra2
Mike Frysinger
- [U-Boot] [PATCH v4 0/4] Add basic clock and pinmux functions to the Tegra2
Simon Glass
- [U-Boot] [PATCH V4 0/6] SPL Linux boot
Simon Schwarz
- [U-Boot] [PATCH v4 0/8] POST: support for km_arm and mem_regions test definition
Mike Frysinger
- [U-Boot] [PATCH v4 0/8] POST: support for km_arm and mem_regions test definition
Valentin Longchamp
- [U-Boot] [PATCH v4 1/1] add support for mcf5307
angelo
- [U-Boot] [PATCH v4 1/1] add support for mcf5307
Jin Zhengxiong-R64188
- [U-Boot] [PATCH v4 1/3] mx25: Introduce sys_proto.h
Fabio Estevam
- [U-Boot] [PATCH v4 1/4] USB: move ehci.h and ehci-core.h into /include/usb/
Fabio Estevam
- [U-Boot] [PATCH v4 1/4] USB: move ehci.h and ehci-core.h into /include/usb/
Jana Rapava
- [U-Boot] [PATCH v4 1/4] USB: move ehci.h and ehci-core.h into /include/usb/
Jana Rapava
- [U-Boot] [PATCH v4 1/5] EHCI: add callback ehci_fixup
Jana Rapava
- [U-Boot] [PATCH v4 1/5] EHCI: add callback ehci_fixup
Marek Vasut
- [U-Boot] [PATCH V4 1/6] removed static from images in cmd_bootm.c
Simon Schwarz
- [U-Boot] [PATCH v4 1/8] POST/arm: adaptations needed for POST on ARM to work
Valentin Longchamp
- [U-Boot] [PATCH v4 2/3] MX25: tx25: Avoid the usage of extern in C file
Fabio Estevam
- [U-Boot] [PATCH v4 2/4] EHCI: add callback ehci_fixup
Jana Rapava
- [U-Boot] [PATCH v4 2/4] EHCI: add callback ehci_fixup
Marek Vasut
- [U-Boot] [PATCH v4 2/5] Add USB support for Efika
Jana Rapava
- [U-Boot] [PATCH V4 2/6] Add cmd_spl command
Simon Schwarz
- [U-Boot] [PATCH v4 2/8] POST: allow redefinition of post_word_load/store
Valentin Longchamp
- [U-Boot] [PATCH v4 3/3] MX25: Add initial support for MX25PDK
Fabio Estevam
- [U-Boot] [PATCH v4 3/4] EHCI: adjust for mx5
Jana Rapava
- [U-Boot] [PATCH v4 3/4] EHCI: adjust for mx5
Marek Vasut
- [U-Boot] [PATCH v4 3/5] /drivers/usb/host/ehci-mxc.c: naming cleanup
Jana Rapava
- [U-Boot] [PATCH V4 3/6] devkit8000/spl: init GPMC for dm9000 in SPL
Simon Schwarz
- [U-Boot] [PATCH v4 3/8] POST: add post_log_res field for post results in global data
Valentin Longchamp
- [U-Boot] [PATCH v4 4/4] Add USB support for Efika
Jana Rapava
- [U-Boot] [PATCH v4 4/4] Add USB support for Efika
Marek Vasut
- [U-Boot] [PATCH v4 4/4] Add USB support for Efika
Jana Rapava
- [U-Boot] [PATCH v4 4/4] Add USB support for Efika
Marek Vasut
- [U-Boot] [PATCH v4 4/4] Add USB support for Efika
Marek Vasut
- [U-Boot] [PATCH v4 4/4] Add USB support for Efika
Jana Rapava
- [U-Boot] [PATCH v4 4/4] usb: add USB support for Efika
Jana Rapava
- [U-Boot] [PATCH v4 4/4] usb: add USB support for Efika
Marek Vasut
- [U-Boot] [PATCH v4 4/5] USB: Add usb_event_poll() to get keyboards working with EHCI
Marek Vasut
- [U-Boot] [PATCH v4 4/5] USB: Add usb_event_poll() to get keyboards working with EHCI
Jana Rapava
- [U-Boot] [PATCH V4 4/6] omap-common/spl: Add linux boot to SPL
Simon Schwarz
- [U-Boot] [PATCH v4 4/8] POST: make env test flags fetching optional
Valentin Longchamp
- [U-Boot] [PATCH v4 5/5] USB: move ehci.h and ehci-core.h into /include/usb/
Jana Rapava
- [U-Boot] [PATCH V4 5/6] omap-common: Add NAND SPL linux booting
Simon Schwarz
- [U-Boot] [PATCH v4 5/8] POST: drivers/memory.c coding style cleanup
Valentin Longchamp
- [U-Boot] [PATCH V4 6/6] omap-common: fixes BSS overwriting problem
Simon Schwarz
- [U-Boot] [PATCH v4 6/8] POST: add new memory regions test
Valentin Longchamp
- [U-Boot] [Patch v4 7/7] powerpc/8xxx: Add support for interactive DDR programming interface
York Sun
- [U-Boot] [PATCH v4 7/8] km_arm: change CONFIG_SYS_TEXT_BASE to end of RAM
Valentin Longchamp
- [U-Boot] [PATCH v4 8/8] km_arm: enable POST for these boards
Valentin Longchamp
- [U-Boot] [PATCH v4] ARMV7: OMAP: I2C driver: Write more than 1 byte at a time in i2c_write
Paulraj, Sandeep
- [U-Boot] [PATCH v4] ARMV7: OMAP: I2C driver: Write more than 1 byte at a time in i2c_write
Heiko Schocher
- [U-Boot] [PATCH V4] console: Implement pre-console buffer
Mike Frysinger
- [U-Boot] [PATCH V4] console: Implement pre-console buffer
Graeme Russ
- [U-Boot] [PATCH V4] console: Implement pre-console buffer
Vadim Bendebury
- [U-Boot] [PATCH V4] console: Implement pre-console buffer
Graeme Russ
- [U-Boot] [PATCH V4] console: Implement pre-console buffer
Vadim Bendebury
- [U-Boot] [PATCH V4] console: Implement pre-console buffer
Graeme Russ
- [U-Boot] [PATCH V4] console: Implement pre-console buffer
Vadim Bendebury
- [U-Boot] [PATCH V4] console: Implement pre-console buffer
Graeme Russ
- [U-Boot] [PATCH v4] dcache: Dcache line size aligned stack buffer allocation
Anton Staaf
- [U-Boot] [PATCH v4] dcache: Dcache line size aligned stack buffer allocation
Lukasz Majewski
- [U-Boot] [PATCH V4] Makefile : fix generation of cpu related asm-offsets.h
Stefano Babic
- [U-Boot] [PATCH V4] Makefile : fix generation of cpu related asm-offsets.h
Wolfgang Denk
- [U-Boot] [PATCH v4] ns16550: change to allow 32 bit access to registers
Dave Aldridge
- [U-Boot] [PATCH v4] ns16550: change to allow 32 bit access to registers
Wolfgang Denk
- [U-Boot] [PATCH v4] ns16550: change to allow 32 bit access to registers
Dave Aldridge
- [U-Boot] [PATCH v4] serial: uartlite: Support for SERIAL_MULTI
Michal Simek
- [U-Boot] [PATCH v4] serial: uartlite: Support for SERIAL_MULTI
Michal Simek
- [U-Boot] [PATCH v4] serial: uartlite: Support for SERIAL_MULTI
Marek Vasut
- [U-Boot] [PATCH v4] serial: uartlite: Support for SERIAL_MULTI
Mike Frysinger
- [U-Boot] [PATCH v4] serial: uartlite: Support for SERIAL_MULTI
Michal Simek
- [U-Boot] [PATCH v4] serial: uartlite: Support for SERIAL_MULTI
Michal Simek
- [U-Boot] [PATCH v4] serial: uartlite: Support for SERIAL_MULTI
Mike Frysinger
- [U-Boot] [PATCH V5 0/6] SPL Linux boot
Simon Schwarz
- [U-Boot] [PATCH v5 00/13] Add PXE support
Jason Hobbs
- [U-Boot] [PATCH v5 1/3] mx25: Introduce sys_proto.h
Fabio Estevam
- [U-Boot] [PATCH v5 1/3] net: Adds Fast Ethernet Controller driver for Armada100
Marek Vasut
- [U-Boot] [PATCH v5 1/3] net: Adds Fast Ethernet Controller driver for Armada100
Mike Frysinger
- [U-Boot] [PATCH v5 1/3] net: Adds Fast Ethernet Controller driver for Armada100
Ajay Bhargav
- [U-Boot] [PATCH v5 1/3] net: Adds Fast Ethernet Controller driver for Armada100
Prafulla Wadaskar
- [U-Boot] [PATCH v5 1/4] usb: Move ehci.h and ehci-core.h to include/usb directory
Jana Rapava
- [U-Boot] [PATCH v5 1/4] usb: Move ehci.h and ehci-core.h to include/usb directory
Fabio Estevam
- [U-Boot] [PATCH v5 1/4] usb: Move ehci.h and ehci-core.h to include/usb directory
Fabio Estevam
- [U-Boot] [PATCH v5 1/4] usb: Move ehci.h and ehci-core.h to include/usb directory
Fabio Estevam
- [U-Boot] [PATCH v5 1/4] usb: Move ehci.h and ehci-core.h to include/usb directory
Jana Rapava
- [U-Boot] [PATCH V5 1/6] removed static from images in cmd_bootm.c
Simon Schwarz
- [U-Boot] [PATCH v5 11/13] Convert ca9x4_ct_vxp to standard env variables
Matt Waddel
- [U-Boot] [PATCH v5 12/13] arm: ca9x4_ct_vxp: enable pxe command support
Matt Waddel
- [U-Boot] [PATCH v5 13/13] arm: ca9x4_ct_vxp: enable PXE BOOTP options support
Matt Waddel
- [U-Boot] [PATCH v5 2/3] Armada100: Enable Ethernet support for GplugD
Ajay Bhargav
- [U-Boot] [PATCH v5 2/3] Armada100: Enable Ethernet support for GplugD
Ajay Bhargav
- [U-Boot] [PATCH v5 2/3] Armada100: Enable Ethernet support for GplugD
Marek Vasut
- [U-Boot] [PATCH v5 2/3] Armada100: Enable Ethernet support for GplugD
Wolfgang Denk
- [U-Boot] [PATCH v5 2/3] Armada100: Enable Ethernet support for GplugD
Ajay Bhargav
- [U-Boot] [PATCH v5 2/3] Armada100: Enable Ethernet support for GplugD
Prafulla Wadaskar
- [U-Boot] [PATCH v5 2/3] Armada100: Enable Ethernet support for GplugD
Ajay Bhargav
- [U-Boot] [PATCH v5 2/3] Armada100: Enable Ethernet support for GplugD
Ajay Bhargav
- [U-Boot] [PATCH v5 2/3] Armada100: Enable Ethernet support for GplugD
Prafulla Wadaskar
- [U-Boot] [PATCH v5 2/3] MX25: tx25: Avoid the usage of extern in C file
Fabio Estevam
- [U-Boot] [PATCH v5 2/4] EHCI: add callback ehci_fixup
Jana Rapava
- [U-Boot] [PATCH v5 2/4] EHCI: add callback ehci_fixup
Marek Vasut
- [U-Boot] [PATCH v5 2/4] EHCI: add callback ehci_fixup
Jana Rapava
- [U-Boot] [PATCH V5 2/6] Add cmd_spl command
Simon Schwarz
- [U-Boot] [PATCH v5 3/3] Armada100: Enable 88E3015 PHY support for GplugD
Marek Vasut
- [U-Boot] [PATCH v5 3/3] Armada100: Enable 88E3015 PHY support for GplugD
Ajay Bhargav
- [U-Boot] [PATCH v5 3/3] MX25: Add initial support for MX25PDK
Fabio Estevam
- [U-Boot] [PATCH v5 3/3] MX25: Add initial support for MX25PDK
Stefano Babic
- [U-Boot] [PATCH v5 3/4] EHCI: adjust for mx5
Jana Rapava
- [U-Boot] [PATCH V5 3/6] devkit8000/spl: init GPMC for dm9000 in SPL
Simon Schwarz
- [U-Boot] [PATCH v5 4/4] Add USB support for Efika
Jana Rapava
- [U-Boot] [PATCH v5 4/4] Add USB support for Efika
Marek Vasut
- [U-Boot] [PATCH v5 4/4] Add USB support for Efika
Jana Rapava
- [U-Boot] [PATCH v5 4/4] Add USB support for Efika
Marek Vasut
- [U-Boot] [PATCH v5 4/4] Add USB support for Efika
Jana Rapava
- [U-Boot] [PATCH v5 4/4] Add USB support for Efika
Marek Vasut
- [U-Boot] [PATCH v5 4/4] Add USB support for Efika
Stefano Babic
- [U-Boot] [PATCH v5 4/4] Add USB support for Efika
Jana Rapava
- [U-Boot] [PATCH v5 4/4] Add USB support for Efika
Jana Rapava
- [U-Boot] [PATCH v5 4/4] Add USB support for Efika
Marek Vasut
- [U-Boot] [PATCH V5 4/6] omap-common/spl: Add linux boot to SPL
Simon Schwarz
- [U-Boot] [PATCH V5 5/6] omap-common: Add NAND SPL linux booting
Simon Schwarz
- [U-Boot] [PATCH V5 6/6] omap-common: fixes BSS overwriting problem
Simon Schwarz
- [U-Boot] [PATCH V5] console: Implement pre-console buffer
Graeme Russ
- [U-Boot] [PATCH V5] console: Implement pre-console buffer
Graeme Russ
- [U-Boot] [PATCH V5] console: Implement pre-console buffer
Mike Frysinger
- [U-Boot] [PATCH V5] console: Implement pre-console buffer
Simon Glass
- [U-Boot] [PATCH V5] console: Implement pre-console buffer
Graeme Russ
- [U-Boot] [PATCH V5] console: Implement pre-console buffer
Mike Frysinger
- [U-Boot] [PATCH V5] console: Implement pre-console buffer
Simon Glass
- [U-Boot] [PATCH V5] console: Implement pre-console buffer
Simon Glass
- [U-Boot] [PATCH v5] serial: uartlite: Support for SERIAL_MULTI
Michal Simek
- [U-Boot] [PATCH V6 0/6] SPL Linux boot
Simon Schwarz
- [U-Boot] [PATCH v6 1/2] MX25: tx25: Avoid the usage of extern in C file
Fabio Estevam
- [U-Boot] [PATCH v6 1/2] MX25: tx25: Avoid the usage of extern in C file
Fabio Estevam
- [U-Boot] [PATCH v6 1/2] MX25: tx25: Avoid the usage of extern in C file
Stefano Babic
- [U-Boot] [PATCH v6 1/3] net: Adds Fast Ethernet Controller driver for Armada100
Ajay Bhargav
- [U-Boot] [PATCH v6 1/3] net: Adds Fast Ethernet Controller driver for Armada100
Prafulla Wadaskar
- [U-Boot] [PATCH v6 1/4] gpio: Move common gpio.h to include/asm-generic
Albert ARIBAUD
- [U-Boot] [PATCH v6 1/4] gpio: Move common gpio.h to include/asm-generic
Wolfgang Denk
- [U-Boot] [PATCH v6 1/4] gpio: Move common gpio.h to include/asm-generic
Kim Phillips
- [U-Boot] [PATCH v6 1/4] usb: Move ehci.h and ehci-core.h to include/usb directory
Jana Rapava
- [U-Boot] [PATCH V6 1/6] removed static from images in cmd_bootm.c
Simon Schwarz
- [U-Boot] [PATCH v6 2/2] MX25: Add initial support for MX25PDK
Fabio Estevam
- [U-Boot] [PATCH v6 2/3] Armada100: Enable Ethernet support for GplugD
Ajay Bhargav
- [U-Boot] [PATCH v6 2/3] Armada100: Enable Ethernet support for GplugD
Prafulla Wadaskar
- [U-Boot] [PATCH v6 2/4] EHCI: add callback ehci_fixup
Jana Rapava
- [U-Boot] [PATCH v6 2/4] EHCI: add callback ehci_fixup
Marek Vasut
- [U-Boot] [PATCH V6 2/6] Add cmd_spl command
Simon Schwarz
- [U-Boot] [PATCH v6 3/3] Armada100: Enable 88E3015 PHY support for GplugD
Prafulla Wadaskar
- [U-Boot] [PATCH v6 3/3] Armada100: Enable 88E3015 PHY support for GplugD
Ajay Bhargav
- [U-Boot] [PATCH v6 3/3] Armada100: Enable 88E3015 PHY support for GplugD
Marek Vasut
- [U-Boot] [PATCH v6 3/3] Armada100: Enable 88E3015 PHY support for GplugD
Ajay Bhargav
- [U-Boot] [PATCH v6 3/4] EHCI: adjust for mx5
Jana Rapava
- [U-Boot] [PATCH v6 3/4] EHCI: adjust for mx5
Marek Vasut
- [U-Boot] [PATCH v6 3/4] EHCI: adjust for mx5
Jana Rapava
- [U-Boot] [PATCH v6 3/4] EHCI: adjust for mx5
Marek Vasut
- [U-Boot] [PATCH V6 3/6] devkit8000/spl: init GPMC for dm9000 in SPL
Simon Schwarz
- [U-Boot] [PATCH v6 4/4] Add USB support for Efika
Jana Rapava
- [U-Boot] [PATCH v6 4/4] Add USB support for Efika
Marek Vasut
- [U-Boot] [PATCH v6 4/4] Add USB support for Efika
Jana Rapava
- [U-Boot] [PATCH v6 4/4] Add USB support for Efika
Marek Vasut
- [U-Boot] [PATCH v6 4/4] usb: add USB support for Efika
Jana Rapava
- [U-Boot] [PATCH v6 4/4] usb: add USB support for Efika
Marek Vasut
- [U-Boot] [PATCH V6 4/6] omap-common/spl: Add linux boot to SPL
Simon Schwarz
- [U-Boot] [PATCH V6 5/6] omap-common: Add NAND SPL linux booting
Simon Schwarz
- [U-Boot] [PATCH V6 6/6] omap-common: fixes BSS overwriting problem
Simon Schwarz
- [U-Boot] [PATCH v6] dreamplug: initial board support.
u-boot at lakedaemon.net
- [U-Boot] [PATCH v6] dreamplug: initial board support.
Igor Grinberg
- [U-Boot] [PATCH v6] dreamplug: initial board support.
Jason
- [U-Boot] [PATCH v7 1/4] usb: Move ehci.h and ehci-core.h to include/usb directory
Jana Rapava
- [U-Boot] [PATCH v7 2/4] EHCI: add callback ehci_fixup
Jana Rapava
- [U-Boot] [PATCH v7 2/4] EHCI: add callback ehci_fixup
Marek Vasut
- [U-Boot] [PATCH v7 2/4] EHCI: add callback ehci_fixup
Marek Vasut
- [U-Boot] [PATCH v7 2/4] EHCI: add callback ehci_fixup
Jana Rapava
- [U-Boot] [PATCH v7 2/4] EHCI: add callback ehci_fixup
Marek Vasut
- [U-Boot] [PATCH v7 3/4] EHCI: adjust for mx5
Jana Rapava
- [U-Boot] [PATCH v7 4/4] Add USB support for Efika
Jana Rapava
- [U-Boot] [PATCH v7 4/4] Add USB support for Efika
Marek Vasut
- [U-Boot] [PATCH v7 4/4] Add USB support for Efika
Jana Rapava
- [U-Boot] [PATCH v7 4/4] Add USB support for Efika
Marek Vasut
- [U-Boot] [PATCH v7] dreamplug: initial board support.
Jason Cooper
- [U-Boot] [PATCH v7] dreamplug: initial board support.
Igor Grinberg
- [U-Boot] [PATCH v7] dreamplug: initial board support.
Prafulla Wadaskar
- [U-Boot] [PATCH v7] dreamplug: initial board support.
Wolfgang Denk
- [U-Boot] [PATCH v7] dreamplug: initial board support.
Jason
- [U-Boot] [PATCH v7] dreamplug: initial board support.
Jason
- [U-Boot] [PATCH v7] dreamplug: initial board support.
Prafulla Wadaskar
- [U-Boot] [PATCH v7] dreamplug: initial board support.
Albert ARIBAUD
- [U-Boot] [PATCH v7] dreamplug: initial board support.
Albert ARIBAUD
- [U-Boot] [PATCH v7] dreamplug: initial board support.
Jason
- [U-Boot] [PATCH v7] dreamplug: initial board support.
Wolfgang Denk
- [U-Boot] [PATCH v7] dreamplug: initial board support.
Jason
- [U-Boot] [PATCH v8 1/4] usb: Move ehci.h and ehci-core.h to include/usb directory
Jana Rapava
- [U-Boot] [PATCH v8 2/4] EHCI: add callback ehci_fixup
Jana Rapava
- [U-Boot] [PATCH v8 2/4] EHCI: add callback ehci_fixup
Marek Vasut
- [U-Boot] [PATCH v8 3/4] EHCI: adjust for mx5
Jana Rapava
- [U-Boot] [PATCH v8 4/4] Add USB support for Efika
Jana Rapava
- [U-Boot] [PATCH v8 4/4] Add USB support for Efika
Marek Vasut
- [U-Boot] [PATCH v8 4/4] Add USB support for Efika
Jana Rapava
- [U-Boot] [PATCH v8 4/4] Add USB support for Efika
Marek Vasut
- [U-Boot] [PATCH v8] dreamplug: initial board support.
Jason Cooper
- [U-Boot] [PATCH v9 1/4] usb: Move ehci.h and ehci-core.h to include/usb directory
Marek Vasut
- [U-Boot] [PATCH v9 1/4] usb: Move ehci.h and ehci-core.h to include/usb directory
Marek Vasut
- [U-Boot] [PATCH v9 1/4] usb: Move ehci.h and ehci-core.h to include/usb directory
Marek Vasut
- [U-Boot] [PATCH v9 1/4] usb: Move ehci.h and ehci-core.h to include/usb directory
Jana Rapava
- [U-Boot] [PATCH v9 1/4] usb: Move ehci.h and ehci-core.h to include/usb directory
Jana Rapava
- [U-Boot] [PATCH v9 1/4] usb: Move ehci.h and ehci-core.h to include/usb directory
Jana Rapava
- [U-Boot] [PATCH v9 1/4] usb: Move ehci.h and ehci-core.h to include/usb directory
Jana Rapava
- [U-Boot] [PATCH v9 2/4] EHCI: add callback ehci_fixup
Jana Rapava
- [U-Boot] [PATCH v9 2/4] EHCI: add callback ehci_fixup
Marek Vasut
- [U-Boot] [PATCH v9 2/4] EHCI: add callback ehci_fixup
Jana Rapava
- [U-Boot] [PATCH v9 2/4] EHCI: add callback ehci_fixup
Marek Vasut
- [U-Boot] [PATCH v9 3/4] EHCI: adjust for mx5
Jana Rapava
- [U-Boot] [PATCH v9 4/4] Add USB support for Efika
Jana Rapava
- [U-Boot] [PATCH v9 4/4] Add USB support for Efika
Marek Vasut
- [U-Boot] [PATCH] [COSMETIC] board/prodrive/alpr/fpga.c: Coding style cleanup
Wolfgang Denk
- [U-Boot] [PATCH] Add missing header for gcc3
Scott McNutt
- [U-Boot] [PATCH] Add missing header for gcc3
Mike Frysinger
- [U-Boot] [PATCH] Add OSE as bootm config for affected board configs
Wolfgang Denk
- [U-Boot] [PATCH] Add OSE as bootm config for affected board configs
Torkel Lundgren
- [U-Boot] [PATCH] Add support for IDS8313 boards
Sergej.Stepanov at ids.de
- [U-Boot] [PATCH] Add support for IDS8313 boards
Wolfgang Denk
- [U-Boot] [PATCH] Add support for IDS8313 boards
Wolfgang Denk
- [U-Boot] [PATCH] arm, davinci: add missing LSPC define for MMC/SD1
Heiko Schocher
- [U-Boot] [PATCH] arm, fdt: update ethernet mac address before booting Linux
Heiko Schocher
- [U-Boot] [PATCH] arm, davinci: add missing LSPC define for MMC/SD1
Heiko Schocher
- [U-Boot] [PATCH] arm, davinci: add missing LSPC define for MMC/SD1
Laurence Withers
- [U-Boot] [PATCH] arm, logbuffer: make it compileclean
Heiko Schocher
- [U-Boot] [PATCH] arm, post: add missing post_time_ms for arm
Heiko Schocher
- [U-Boot] [PATCH] arm, usb, davinci: make USBPHY_CTL register configurable
Albert ARIBAUD
- [U-Boot] [PATCH] arm, usb, davinci: make USBPHY_CTL register configurable
Heiko Schocher
- [U-Boot] [PATCH] arm, usb, davinci: make USBPHY_CTL register configurable
Remy Bohmer
- [U-Boot] [PATCH] arm: add 64-64 bit divider
Che-liang Chiou
- [U-Boot] [PATCH] arm: add 64-64 bit divider
Marek Vasut
- [U-Boot] [PATCH] arm: add 64-64 bit divider
Che-liang Chiou
- [U-Boot] [PATCH] arm: add 64-64 bit divider
Marek Vasut
- [U-Boot] [PATCH] arm: add 64-64 bit divider
Che-liang Chiou
- [U-Boot] [PATCH] arm: add 64-64 bit divider
Wolfgang Denk
- [U-Boot] [PATCH] arm: add 64-64 bit divider
Che-liang Chiou
- [U-Boot] [PATCH] arm: add 64-64 bit divider
Wolfgang Denk
- [U-Boot] [PATCH] arm: add 64-64 bit divider
Graeme Russ
- [U-Boot] [PATCH] arm: add 64-64 bit divider
Wolfgang Denk
- [U-Boot] [PATCH] arm: add 64-64 bit divider
Graeme Russ
- [U-Boot] [PATCH] arm: Add Prep subcommand support to bootm
Andreas Bießmann
- [U-Boot] [PATCH] arm: Add Prep subcommand support to bootm
Simon Schwarz
- [U-Boot] [PATCH] arm: Add Prep subcommand support to bootm
Andreas Bießmann
- [U-Boot] [PATCH] ARM: Convert {in, out}s[bwl] to inline functions
Nick Thompson
- [U-Boot] [PATCH] ARM: Convert {in, out}s[bwl] to inline functions
Wolfgang Denk
- [U-Boot] [PATCH] ARM: Convert {in, out}s[bwl] to inline functions
Wolfgang Denk
- [U-Boot] [PATCH] ARM: Convert {in, out}s[bwl] to inline functions
Marek Vasut
- [U-Boot] [PATCH] ARM: Convert {in, out}s[bwl] to inline functions
Marek Vasut
- [U-Boot] [PATCH] ARM: Convert {in, out}s[bwl] to inline functions
Nick Thompson
- [U-Boot] [PATCH] ARM: Convert {in, out}s[bwl] to inline functions
Marek Vasut
- [U-Boot] [PATCH] ARM: Convert {in, out}s[bwl] to inline functions
Simon Glass
- [U-Boot] [PATCH] ARM: Convert {in, out}s[bwl] to inline functions
Marek Vasut
- [U-Boot] [PATCH] ARM: Convert {in, out}s[bwl] to inline functions
Wolfgang Denk
- [U-Boot] [PATCH] ARM: Convert {in, out}s[bwl] to inline functions
Marek Vasut
- [U-Boot] [PATCH] ARM: Convert {in, out}s[bwl] to inline functions
Wolfgang Denk
- [U-Boot] [PATCH] ARM: Convert {in,out}s[bwl] to inline functions
Marek Vasut
- [U-Boot] [PATCH] ARM: hawkboard: fix compilation of nand_spl
Stefano Babic
- [U-Boot] [PATCH] ARM: hawkboard: fix compilation of nand_spl
Wolfgang Denk
- [U-Boot] [PATCH] ARM: hawkboard: fix compilation of nand_spl
Stefano Babic
- [U-Boot] [PATCH] ARM: hawkboard: fix compilation of nand_spl
Stefano Babic
- [U-Boot] [PATCH] ARM: hawkboard: fix compilation of nand_spl
Stefano Babic
- [U-Boot] [PATCH] ARM: hawkboard: fix compilation of nand_spl
Paulraj, Sandeep
- [U-Boot] [PATCH] ARM: hawkboard: fix compilation of nand_spl
Wolfgang Denk
- [U-Boot] [PATCH] ARM: hawkboard: fix compilation of nand_spl
Wolfgang Denk
- [U-Boot] [PATCH] ARM: hawkboard: fix compilation of nand_spl
Albert ARIBAUD
- [U-Boot] [PATCH] ARM: hawkboard: fix compilation of nand_spl
Albert ARIBAUD
- [U-Boot] [PATCH] ARM: hawkboard: fix compilation of nand_spl
Wolfgang Denk
- [U-Boot] [PATCH] ARM: hawkboard: fix compilation of nand_spl
Wolfgang Denk
- [U-Boot] [PATCH] ARM: hawkboard: fix compilation of nand_spl
Sughosh Ganu
- [U-Boot] [PATCH] ARM: hawkboard: fix compilation of nand_spl
Stefano Babic
- [U-Boot] [PATCH] ARM: hawkboard_nand: fix compilation of nand_spl
Wolfgang Denk
- [U-Boot] [PATCH] ARM: hawkboard_nand: fix compilation of nand_spl
Stefano Babic
- [U-Boot] [PATCH] ARM: hawkboard_nand: fix compilation of nand_spl
Stefano Babic
- [U-Boot] [PATCH] ARM: PXA: remove broken "zylonite" board.
Wolfgang Denk
- [U-Boot] [PATCH] ARM: PXA: remove broken "zylonite" board.
Marek Vasut
- [U-Boot] [PATCH] ARM: PXA: remove broken "zylonite" board.
Wolfgang Denk
- [U-Boot] [PATCH] ARM: remove broken "ixpg425" and "ixpg425" boards
Albert ARIBAUD
- [U-Boot] [PATCH] ARM: remove broken "ixpg425" and "ixpg425" boards
Fabio Estevam
- [U-Boot] [PATCH] ARM: remove broken "ixpg425" and "ixpg425" boards
Stefan Roese
- [U-Boot] [PATCH] ARM: remove broken "ixpg425" and "ixpg425" boards
Albert ARIBAUD
- [U-Boot] [PATCH] ARM: remove broken "ixpg425" and "ixpg425" boards
Albert ARIBAUD
- [U-Boot] [PATCH] arm: RFC: add clock speed constants
Simon Glass
- [U-Boot] [PATCH] arm: RFC: add clock speed constants
Wolfgang Denk
- [U-Boot] [PATCH] arm: RFC: add clock speed constants
Simon Glass
- [U-Boot] [PATCH] arm: RFC: add clock speed constants
Wolfgang Denk
- [U-Boot] [PATCH] ARM: versatile: delete split_by_variant.sh
Linus Walleij
- [U-Boot] [PATCH] ARM: versatile: delete split_by_variant.sh
Stefano Babic
- [U-Boot] [PATCH] ARM: versatile: delete split_by_variant.sh
Wolfgang Denk
- [U-Boot] [PATCH] armv7: only call save_boot_params for OMAP
Simon Schwarz
- [U-Boot] [PATCH] armv7: only call save_boot_params for OMAP
Aneesh V
- [U-Boot] [PATCH] armv7: only call save_boot_params for OMAP
Simon Schwarz
- [U-Boot] [PATCH] armv7: only call save_boot_params for OMAP
Aneesh V
- [U-Boot] [PATCH] ASIX: Fix buffer access in asix_get_phy_addr()
Marek Vasut
- [U-Boot] [PATCH] ASIX: Fix buffer access in asix_get_phy_addr()
Remy Bohmer
- [U-Boot] [PATCH] ATA: Squash warnings in mxc_ata.
Marek Vasut
- [U-Boot] [PATCH] ATA: Squash warnings in mxc_ata.
Stefano Babic
- [U-Boot] [PATCH] bdinfo: Fix bdinfo to show all MACs for Microblaze and ARM
Wolfgang Denk
- [U-Boot] [PATCH] bdinfo: Fix bdinfo to show all MACs for Microblaze and ARM
Marek Vasut
- [U-Boot] [PATCH] BeagleBoard: Remove userbutton command and use gpio command instead
Joel A Fernandes
- [U-Boot] [PATCH] bootp: Fix bug in auto_load function
Michal Simek
- [U-Boot] [PATCH] CFI: trigger watchdog in write_buf()
Heiko Schocher
- [U-Boot] [PATCH] cfi_flash driver: fixed addressing for 8-bit flash buses.
Stefan Roese
- [U-Boot] [PATCH] CM4000: fix broken flash base for OpenGear boards
Wolfgang Denk
- [U-Boot] [PATCH] CM4000: fix broken flash base for OpenGear boards
Greg Ungerer
- [U-Boot] [PATCH] CM4000: fix missing RAM definitions for OpenGear boards
Wolfgang Denk
- [U-Boot] [PATCH] CM4000: fix missing RAM definitions for OpenGear boards
Greg Ungerer
- [U-Boot] [PATCH] cm4008, cm41xx: fix build warnings
Wolfgang Denk
- [U-Boot] [PATCH] cm4008, cm41xx: fix build warnings
Wolfgang Denk
- [U-Boot] [PATCH] CM4008: fix signedness of env bootargs string pointer
Greg Ungerer
- [U-Boot] [PATCH] CM4008: fix signedness of env bootargs string pointer
Wolfgang Denk
- [U-Boot] [PATCH] CM41xx: fix signedness of env bootargs string pointer
Greg Ungerer
- [U-Boot] [PATCH] CM41xx: fix signedness of env bootargs string pointer
Wolfgang Denk
- [U-Boot] [PATCH] common: fix behavior of ROUND macro when input is already rounded
Wolfgang Denk
- [U-Boot] [PATCH] common: fix behavior of ROUND macro when input is already rounded
Anton Staaf
- [U-Boot] [PATCH] Correct call to eth_write_hwaddr()
Heiko Schocher
- [U-Boot] [PATCH] Correct call to eth_write_hwaddr()
Wolfgang Denk
- [U-Boot] [PATCH] cosmetic, post: Codingstyle cleanup
Heiko Schocher
- [U-Boot] [PATCH] cosmetic: fsl_pmic: cosmetic for the help message
Stefano Babic
- [U-Boot] [PATCH] cosmetic: fsl_pmic: cosmetic for the help message
Jason Hui
- [U-Boot] [PATCH] cosmetic: fsl_pmic: cosmetic for the help message
Jason Liu
- [U-Boot] [PATCH] da830: add support to read mac addr from EEPROM
nagabhushana.netagunte at ti.com
- [U-Boot] [PATCH] da830: add support to read mac addr from EEPROM
Mike Frysinger
- [U-Boot] [PATCH] DA830: Fix Build Warning
s-paulraj at ti.com
- [U-Boot] [PATCH] DA830: Fix Build Warning
Albert ARIBAUD
- [U-Boot] [PATCH] da8xxevm: Fix warning: unused variable 'val'
Wolfgang Denk
- [U-Boot] [PATCH] da8xxevm: Fix warning: unused variable 'val'
Wolfgang Denk
- [U-Boot] [PATCH] DaVinci: correct PDSTAT.STATE mask
Sergei Shtylyov
- [U-Boot] [PATCH] dcache: Dcache line size aligned stack buffer allocation
Mike Frysinger
- [U-Boot] [PATCH] dcache: Dcache line size aligned stack buffer allocation
Aneesh V
- [U-Boot] [PATCH] dcache:s5p CONFIG_SYS_CACHELINE_SIZE added to s5p targets
Lukasz Majewski
- [U-Boot] [PATCH] Devkit8000: Change console from ttyS2 to ttyO2
Thomas Weber
- [U-Boot] [PATCH] Devkit8000: Change console from ttyS2 to ttyO2
Paulraj, Sandeep
- [U-Boot] [PATCH] devkit8000: Fix build break
s-paulraj at ti.com
- [U-Boot] [PATCH] devkit8000: Fix build break
Tom Rini
- [U-Boot] [PATCH] devkit8000: Fix build break
Albert ARIBAUD
- [U-Boot] [PATCH] devkit8000: Fix build break
Paulraj, Sandeep
- [U-Boot] [PATCH] devkit8000: Fix build break
Tom Rini
- [U-Boot] [PATCH] dm36x: revert cache disable patch
nagabhushana.netagunte at ti.com
- [U-Boot] [PATCH] dm644X: revert cache disable patch
nagabhushana.netagunte at ti.com
- [U-Boot] [PATCH] doc/README.scrapyard: Update board removal commit IDs
Wolfgang Denk
- [U-Boot] [PATCH] doc/README.scrapyard: Update board removal commit IDs
Wolfgang Denk
- [U-Boot] [PATCH] doc/README.scrapyard: Update commit IDs or board removals
Wolfgang Denk
- [U-Boot] [PATCH] doc/README.scrapyard: Update commit IDs or board removals
Wolfgang Denk
- [U-Boot] [PATCH] doc: provide a correct board_init_r definition path
Mike Frysinger
- [U-Boot] [PATCH] doc: provide a correct board_init_r definition path
Wolfgang Denk
- [U-Boot] [PATCH] doc: provide a correct board_init_r definition path
Vladimir Zapolskiy
- [U-Boot] [PATCH] drivers/video/Makefile: include object files only once
Wolfgang Denk
- [U-Boot] [PATCH] drivers/video/Makefile: include object files only once
Wolfgang Denk
- [U-Boot] [PATCH] Drop bogus BOOTFLAG_* definitions
Wolfgang Denk
- [U-Boot] [PATCH] Drop bogus BOOTFLAG_* definitions
Heiko Schocher
- [U-Boot] [PATCH] Drop bogus BOOTFLAG_* definitions
Wolfgang Denk
- [U-Boot] [PATCH] Efika: Configure additional regulators for HDMI output
Marek Vasut
- [U-Boot] [PATCH] EfikaMX: Adjust undocumented magic constant in config file
Marek Vasut
- [U-Boot] [PATCH] EfikaMX: Adjust undocumented magic constant in config file
Stefano Babic
- [U-Boot] [PATCH] examples: api: allow build with private libgcc
Che-Liang Chiou
- [U-Boot] [PATCH] examples: api: allow build with private libgcc
Mike Frysinger
- [U-Boot] [PATCH] Fix fw_env bug for multi-sector environments on NOR flash
Wolfgang Denk
- [U-Boot] [PATCH] Fix incorrect array size of phy settings for 405EX
Wolfgang Denk
- [U-Boot] [PATCH] Fix incorrect array size of phy settings for 405EX
Stefan Roese
- [U-Boot] [PATCH] Fix incorrect array size of phy settings for 405EX
Stefan Roese
- [U-Boot] [PATCH] Fix incorrect array size of phy settings for 405EX
Weirich, Bernhard
- [U-Boot] [PATCH] Fix warning: "assert" redefined
Wolfgang Denk
- [U-Boot] [PATCH] Fix warning: "assert" redefined
Simon Glass
- [U-Boot] [PATCH] Fix warning: "assert" redefined
Wolfgang Denk
- [U-Boot] [PATCH] Flush cache after the OS image is loaded into the memory.
Wolfgang Denk
- [U-Boot] [PATCH] fm-eth: Add ability for board code to disable a port
Wolfgang Denk
- [U-Boot] [PATCH] fm-eth: Add ability for board code to disable a port
Kumar Gala
- [U-Boot] [PATCH] fm-eth: Add ability for board code to disable a port
Wolfgang Denk
- [U-Boot] [PATCH] fm-eth: Add ability for board code to disable a port
Kumar Gala
- [U-Boot] [PATCH] fm-eth: Add ability for board code to disable a port
Kumar Gala
- [U-Boot] [PATCH] ftgmac100: reset fix when supports wake on lan
Macpaul Lin
- [U-Boot] [PATCH] GCC4.4: Squash multiple warnings due to strict aliasing
Marek Vasut
- [U-Boot] [PATCH] GCC4.4: Squash multiple warnings due to strict aliasing
Marek Vasut
- [U-Boot] [PATCH] GCC4.4: Squash multiple warnings due to strict aliasing
Marek Vasut
- [U-Boot] [PATCH] GCC4.4: Squash multiple warnings due to strict aliasing
Wolfgang Denk
- [U-Boot] [PATCH] GCC4.4: Squash multiple warnings due to strict aliasing
Marek Vasut
- [U-Boot] [PATCH] GCC4.4: Squash multiple warnings due to strict aliasing
Wolfgang Denk
- [U-Boot] [PATCH] GCC4.4: Squash multiple warnings due to strict aliasing
Marek Vasut
- [U-Boot] [PATCH] GCC4.4: Squash multiple warnings due to strict aliasing
Nick Thompson
- [U-Boot] [PATCH] GCC4.4: Squash multiple warnings due to strict aliasing
Nick Thompson
- [U-Boot] [PATCH] GCC4.6: Convert various empty macros to inline functions
Marek Vasut
- [U-Boot] [PATCH] harmony / seaboard: fix out of tree building
Wolfgang Denk
- [U-Boot] [PATCH] harmony / seaboard: fix out of tree building
Anton Staaf
- [U-Boot] [PATCH] harmony / seaboard: fix out of tree building
Wolfgang Denk
- [U-Boot] [PATCH] harmony / seaboard: fix out of tree building
Wolfgang Denk
- [U-Boot] [PATCH] harmony: fix out of tree building
Wolfgang Denk
- [U-Boot] [PATCH] i2c, davinci: add i2c set speed
Heiko Schocher
- [U-Boot] [PATCH] I2C: Add i2c_get/set_bus_speed() to mxc_i2c.c
Marek Vasut
- [U-Boot] [PATCH] I2C: Add i2c_get/set_bus_speed() to mxc_i2c.c
Stefano Babic
- [U-Boot] [PATCH] I2C: mv_i2c: fix build issue when enable debug option
Lei Wen
- [U-Boot] [PATCH] I2C: mv_i2c: fix multi-bus init issue
Lei Wen
- [U-Boot] [PATCH] i2c_no_probes: Fix initialization warnings
Sanjeev Premi
- [U-Boot] [PATCH] i2c_no_probes: Fix initialization warnings
Heiko Schocher
- [U-Boot] [PATCH] i2c_no_probes: Fix initialization warnings
Premi, Sanjeev
- [U-Boot] [PATCH] ignore soc asm-offsets.s
Mike Frysinger
- [U-Boot] [PATCH] ignore soc asm-offsets.s
Wolfgang Denk
- [U-Boot] [PATCH] ignore soc asm-offsets.s
Laurence Withers
- [U-Boot] [PATCH] ignore soc asm-offsets.s
Mike Frysinger
- [U-Boot] [PATCH] image: push default arch values to arch headers
Mike Frysinger
- [U-Boot] [PATCH] image: push default arch values to arch headers
Wolfgang Denk
- [U-Boot] [PATCH] image: push default arch values to arch headers
Mike Frysinger
- [U-Boot] [PATCH] image: push default arch values to arch headers
Wolfgang Denk
- [U-Boot] [PATCH] image: push default arch values to arch headers
Mike Frysinger
- [U-Boot] [PATCH] image: push default arch values to arch headers
Wolfgang Denk
- [U-Boot] [PATCH] Improve output of bootm command
Andrew Murray
- [U-Boot] [PATCH] Improve output of bootm command
Wolfgang Denk
- [U-Boot] [PATCH] Improve output of bootm command
Andrew Murray
- [U-Boot] [PATCH] Improve output of bootm command
Mike Frysinger
- [U-Boot] [PATCH] Improve output of bootm command
Andrew Murray
- [U-Boot] [PATCH] Improve output of bootm command
Mike Frysinger
- [U-Boot] [PATCH] Improve output of bootm command
Andrew Murray
- [U-Boot] [PATCH] km/common: fix bug in IVM mac address access
Holger Brunck
- [U-Boot] [PATCH] km/common: fix bug in IVM mac address access
Wolfgang Denk
- [U-Boot] [PATCH] KS8695: convert KS8695 eth driver to CONFIG_MULTI_ETH
Greg Ungerer
- [U-Boot] [PATCH] KS8695: convert KS8695 eth driver to CONFIG_MULTI_ETH
Wolfgang Denk
- [U-Boot] [PATCH] KS8695: convert KS8695 eth driver to CONFIG_MULTI_ETH
Mike Frysinger
- [U-Boot] [PATCH] KS8695: convert KS8695 eth driver to CONFIG_MULTI_ETH
Greg Ungerer
- [U-Boot] [PATCH] KS8695: move TIMER_ definitions before code use
Greg Ungerer
- [U-Boot] [PATCH] KS8695: move TIMER_ definitions before code use
Wolfgang Denk
- [U-Boot] [PATCH] KS8695: move TIMER_ definitions before code use
Wolfgang Denk
- [U-Boot] [PATCH] KS8695: move TIMER_ definitions before code use
Greg Ungerer
- [U-Boot] [PATCH] led: remove camelcase in LED functions from assembly
Jason Kridner
- [U-Boot] [PATCH] led: remove camelcase in LED functions from assembly
Mike Frysinger
- [U-Boot] [PATCH] led: remove camelcase in LED functions from assembly
Mike Frysinger
- [U-Boot] [PATCH] led: remove camelcase in LED functions from assembly
Mike Frysinger
- [U-Boot] [PATCH] led: remove camelcase in LED functions from assembly
Wolfgang Denk
- [U-Boot] [PATCH] led: remove camelcase in LED functions from assembly
Albert ARIBAUD
- [U-Boot] [PATCH] led: remove camelcase in LED functions from assembly
Albert ARIBAUD
- [U-Boot] [PATCH] led: remove camelcase in LED functions from assembly
Albert ARIBAUD
- [U-Boot] [PATCH] linkstation: fix warning: "CONFIG_IDENT_STRING" redefined
Wolfgang Denk
- [U-Boot] [PATCH] MAINTAINERS: delete stale entry for EOL Wind River boards
Paul Gortmaker
- [U-Boot] [PATCH] MAINTAINERS: fix integrator and versatile
Wolfgang Denk
- [U-Boot] [PATCH] MAKEALL: drop boards listed in boards.cfg
Wolfgang Denk
- [U-Boot] [PATCH] MAKEALL: drop boards listed in boards.cfg
Wolfgang Denk
- [U-Boot] [PATCH] MAKEALL: drop non-existent "versatile" configuration
Wolfgang Denk
- [U-Boot] [PATCH] MAKEALL: drop non-existent "versatile" configuration
Wolfgang Denk
- [U-Boot] [PATCH] MAKEALL: rename coldfire list to m68k to match arch
Mike Frysinger
- [U-Boot] [PATCH] MAKEALL: rename coldfire list to m68k to match arch
Mike Frysinger
- [U-Boot] [PATCH] MC13892: Add REGMODE0 bits definitions
Marek Vasut
- [U-Boot] [PATCH] microblaze: Enable SERIAL_MULTI
Michal Simek
- [U-Boot] [PATCH] mii: miiphy register address width change
Chandan Nath
- [U-Boot] [PATCH] mii: miiphy register address width change
Mike Frysinger
- [U-Boot] [PATCH] minor improvements for env tools
Luka Perkov
- [U-Boot] [PATCH] minor improvements for env tools
Wolfgang Denk
- [U-Boot] [PATCH] minor improvements for env tools
Wolfgang Denk
- [U-Boot] [PATCH] mkconfig: start deprecating Makefile config targets
Peter Korsgaard
- [U-Boot] [PATCH] mkconfig: start deprecating Makefile config targets
Mike Frysinger
- [U-Boot] [PATCH] mmc: retry the cmd8 to meet 74 clocks requirement in the spec
Marek Vasut
- [U-Boot] [PATCH] mmc: retry the cmd8 to meet 74 clocks requirement in the spec
Lei Wen
- [U-Boot] [PATCH] mmc: retry the cmd8 to meet 74 clocks requirement in the spec
Andy Fleming
- [U-Boot] [PATCH] mmc: retry the cmd8 to meet 74 clocks requirement in the spec
Lei Wen
- [U-Boot] [PATCH] mpc83xx: fix global timer structure definition
Kim Phillips
- [U-Boot] [PATCH] MPC8xx: fix build problem for ETX094 board
Wolfgang Denk
- [U-Boot] [PATCH] MPC8xx: fix build problem for ETX094 board
Wolfgang Denk
- [U-Boot] [PATCH] mpc8xxx: lc_common_dimm_params: make less verbose
Kumar Gala
- [U-Boot] [PATCH] mx1: add mx1/l support for mxc_i2c
Heiko Schocher
- [U-Boot] [PATCH] mx1: add mx1/l support for mxc_i2c
Marek Vasut
- [U-Boot] [PATCH] mx1: add mx1/l support for mxc_i2c
Stefano Babic
- [U-Boot] [PATCH] mx1: add mx1/l support for mxc_i2c
Eric Jarrige
- [U-Boot] [PATCH] mx1: add mx1/l support for mxc_i2c
stefano babic
- [U-Boot] [PATCH] mx1: add mx1/l support for mxc_i2c
Eric Jarrige
- [U-Boot] [PATCH] mx1: add mx1/l support for mxc_i2c
Stefano Babic
- [U-Boot] [PATCH] MX25: tx25: Cleanup tx25.h config
Stefano Babic
- [U-Boot] [PATCH] MX25: tx25: Pass NAND_U_BOOT option
Fabio Estevam
- [U-Boot] [PATCH] MX25: tx25: Pass NAND_U_BOOT option
Stefano Babic
- [U-Boot] [PATCH] MX25: tx25: Pass NAND_U_BOOT option
Stefano Babic
- [U-Boot] [PATCH] MX25: tx25: Pass NAND_U_BOOT option
Fabio Estevam
- [U-Boot] [PATCH] MX31: Disable watchdog during low-power modes
Fabio Estevam
- [U-Boot] [PATCH] MX31: Disable watchdog during low-power modes
Marek Vasut
- [U-Boot] [PATCH] MX31: Disable watchdog during low-power modes
Stefano Babic
- [U-Boot] [PATCH] MX31: Disable watchdog during low-power modes
Marek Vasut
- [U-Boot] [PATCH] MX31: Disable watchdog during low-power modes
Fabio Estevam
- [U-Boot] [PATCH] MX31: Disable watchdog during low-power modes
Stefano Babic
- [U-Boot] [PATCH] MX31: Disable watchdog during low-power modes
Wolfgang Denk
- [U-Boot] [PATCH] MX31: Improve readability for reset cause
Fabio Estevam
- [U-Boot] [PATCH] MX31: Improve readability for reset cause
Stefano Babic
- [U-Boot] [PATCH] MX31: mx31pdk: make use of GPIO framework
Stefano Babic
- [U-Boot] [PATCH] MX31: mx31pdk: make use of GPIO framework
Wolfgang Denk
- [U-Boot] [PATCH] MX31: mx31pdk: Remove nand_spl config.mk file
Fabio Estevam
- [U-Boot] [PATCH] MX31: mx31pdk: Remove nand_spl config.mk file
Fabio Estevam
- [U-Boot] [PATCH] MX31: mx31pdk: Remove nand_spl config.mk file
Stefano Babic
- [U-Boot] [PATCH] mx31: provide readable WEIM CS accessor
Helmut Raiger
- [U-Boot] [PATCH] mx31: provide readable WEIM CS accessor
Stefano Babic
- [U-Boot] [PATCH] mx31: provide readable WEIM CS accessor
Helmut Raiger
- [U-Boot] [PATCH] mx31: provide readable WEIM CS accessor
Stefano Babic
- [U-Boot] [PATCH] mx31: provide readable WEIM CS accessor
Helmut Raiger
- [U-Boot] [PATCH] mx31: provide readable WEIM CS accessor
Stefano Babic
- [U-Boot] [PATCH] mx31pdk: Remove board config.mk file
Fabio Estevam
- [U-Boot] [PATCH] mx31pdk: Remove board config.mk file
Stefano Babic
- [U-Boot] [PATCH] mx31pdk: Remove board config.mk file
Scott Wood
- [U-Boot] [PATCH] mx31pdk: Remove board config.mk file
Fabio Estevam
- [U-Boot] [PATCH] mx31pdk: Remove unneeded config
Fabio Estevam
- [U-Boot] [PATCH] mx31pdk: Remove unneeded config
Stefano Babic
- [U-Boot] [PATCH] MX51: vision2: Set global macros
Stefano Babic
- [U-Boot] [PATCH] MX51: vision2: Set global macros
Marek Vasut
- [U-Boot] [PATCH] MX51: vision2: Set global macros
Stefano Babic
- [U-Boot] [PATCH] MX5: Make IPU display output and pixel format configurable
Marek Vasut
- [U-Boot] [PATCH] MX5: Make IPU display output and pixel format configurable
Fabio Estevam
- [U-Boot] [PATCH] MX5: Make IPU display output and pixel format configurable
Stefano Babic
- [U-Boot] [PATCH] MX5: Make IPU display output and pixel format configurable
Marek Vasut
- [U-Boot] [PATCH] NAND: davinci: choose correct 1-bit h/w ECC reg
Laurence Withers
- [U-Boot] [PATCH] NAND: davinci: choose correct 1-bit h/w ECC reg
Laurence Withers
- [U-Boot] [PATCH] NAND: davinci: choose correct 1-bit h/w ECC reg
Sergei Shtylyov
- [U-Boot] [PATCH] NAND: davinci: choose correct 1-bit h/w ECC reg
Laurence Withers
- [U-Boot] [PATCH] net, davinci_emac: make less verbose - turn printf() into debug()
Heiko Schocher
- [U-Boot] [PATCH] net, davinci_emac: add KSZ8864 switch
Heiko Schocher
- [U-Boot] [PATCH] net, davinci_emac: add KSZ8864 switch
Mike Frysinger
- [U-Boot] [PATCH] net, davinci_emac: add KSZ8864 switch
Heiko Schocher
- [U-Boot] [PATCH] net, davinci_emac: let the EMAC detect the PHYs
Heiko Schocher
- [U-Boot] [PATCH] net/bootp.c: fix tftp load if autoload environment var isn't set
Peter Korsgaard
- [U-Boot] [PATCH] net/bootp.c: fix tftp load if autoload environment var isn't set
Wolfgang Denk
- [U-Boot] [PATCH] net/bootp.c: fix tftp load if autoload environment var isn't set
Peter Korsgaard
- [U-Boot] [PATCH] net/bootp.c: fix tftp load if autoload environment var isn't set
Fabio Estevam
- [U-Boot] [PATCH] net/bootp.c: fix tftp load if autoload environment var isn't set
Simon Glass
- [U-Boot] [PATCH] net/bootp.c: fix tftp load if autoload environment var isn't set
Simon Glass
- [U-Boot] [PATCH] net/eth: add newline to "failed MAC address" warning
Holger Brunck
- [U-Boot] [PATCH] net/eth: add newline to "failed MAC address" warning
Philip Balister
- [U-Boot] [PATCH] net/eth: add newline to "failed MAC address" warning
Mike Frysinger
- [U-Boot] [PATCH] net/eth: add newline to "failed MAC address" warning
Holger Brunck
- [U-Boot] [PATCH] net: Add \n before warning message so it prints on a new line.
Philip Balister
- [U-Boot] [PATCH] net: Add \n before warning message so it prints on a new line.
Albert ARIBAUD
- [U-Boot] [PATCH] net: Add \n before warning message so it prints on a new line.
Philip Balister
- [U-Boot] [PATCH] net: Add \n before warning message so it prints on a new line.
Albert ARIBAUD
- [U-Boot] [PATCH] net: axi_ethernet: Add driver to u-boot
Michal Simek
- [U-Boot] [PATCH] net: axi_ethernet: Add driver to u-boot
Michal Simek
- [U-Boot] [PATCH] net: axi_ethernet: Add driver to u-boot
Marek Vasut
- [U-Boot] [PATCH] net: axi_ethernet: Add driver to u-boot
Michal Simek
- [U-Boot] [PATCH] net: axi_ethernet: Add driver to u-boot
Marek Vasut
- [U-Boot] [PATCH] net: axi_ethernet: Add driver to u-boot
Michal Simek
- [U-Boot] [PATCH] net: axi_ethernet: Add driver to u-boot
Wolfgang Denk
- [U-Boot] [PATCH] net: dc2114x: check for apropriate command
Linus Walleij
- [U-Boot] [PATCH] net: fix a regression in bootp.c
Helmut Raiger
- [U-Boot] [PATCH] net: fix warning not initializing MAC address
Heiko Schocher
- [U-Boot] [PATCH] net: fix warning not initializing MAC address
Kumar Gala
- [U-Boot] [PATCH] net: fix warning not initializing MAC address
Heiko Schocher
- [U-Boot] [PATCH] net: turn name len check into an assert
Mike Frysinger
- [U-Boot] [PATCH] net: turn name len check into an assert
Marek Vasut
- [U-Boot] [PATCH] net: turn name len check into an assert
Mike Frysinger
- [U-Boot] [PATCH] net: turn name len check into an assert
Marek Vasut
- [U-Boot] [PATCH] net: turn name len check into an assert
Mike Frysinger
- [U-Boot] [PATCH] net: turn name len check into an assert
Wolfgang Denk
- [U-Boot] [PATCH] new tool mkenvimage: generates an env image from an arbitrary config file
David Wagner
- [U-Boot] [PATCH] new tool mkenvimage: generates an env image from an arbitrary config file
David Wagner
- [U-Boot] [PATCH] omap24xx: fix 'reset_timer_masked' declaration error
Wolfgang Denk
- [U-Boot] [PATCH] omap24xx: fix 'reset_timer_masked' declaration error
Wolfgang Denk
- [U-Boot] [PATCH] OMAP3 Beagle: Minor config cleanup
s-paulraj at ti.com
- [U-Boot] [PATCH] OMAP3 Beagle: Minor config cleanup
Jason Kridner
- [U-Boot] [PATCH] omap3: beagle: Fix build warning
Sanjeev Premi
- [U-Boot] [PATCH] omap3: beagle: Fix build warning
Albert ARIBAUD
- [U-Boot] [PATCH] omap3: beagle: Fix build warning
Premi, Sanjeev
- [U-Boot] [PATCH] omap3: beagle: Fix build warning
Heiko Schocher
- [U-Boot] [PATCH] omap3: beagle: Fix build warning
Premi, Sanjeev
- [U-Boot] [PATCH] omap3: beagle: Fix build warning
Jason Kridner
- [U-Boot] [PATCH] omap3: beagle: Fix build warning
Albert ARIBAUD
- [U-Boot] [PATCH] omap3: beagle: Fix build warning
Stefano Babic
- [U-Boot] [PATCH] omap3: beagle: Fix build warning
Premi, Sanjeev
- [U-Boot] [PATCH] omap3: beagle: Fix build warning
Albert ARIBAUD
- [U-Boot] [PATCH] omap3: beagle: Fix build warning
Paulraj, Sandeep
- [U-Boot] [PATCH] omap3: beagle: Fix build warning
Joel A Fernandes
- [U-Boot] [PATCH] OMAP3: beagle: Fix build warning in beagle.c
Dirk Behme
- [U-Boot] [PATCH] OMAP3: beagle: Fix build warning in beagle.c
Jason Kridner
- [U-Boot] [PATCH] OMAP3: beagle: Fix build warning in beagle.c
Albert ARIBAUD
- [U-Boot] [PATCH] omap3: Fix compile warning
Sanjeev Premi
- [U-Boot] [PATCH] omap3: Fix compile warning
Paulraj, Sandeep
- [U-Boot] [PATCH] OMAP3: Overo: Update GPMC timing for ethernet chip.
Steve Sakoman
- [U-Boot] [PATCH] OMAP3: Overo: Update GPMC timing for ethernet chip.
Enric Balletbò i Serra
- [U-Boot] [PATCH] OMAP3: Overo: Update GPMC timing for ethernet chip.
Enric Balletbò i Serra
- [U-Boot] [PATCH] OMAP3: Overo: Update GPMC timing for ethernet chip.
Philip Balister
- [U-Boot] [PATCH] OMAP3: Overo: Update GPMC timing for ethernet chip.
Philip Balister
- [PATCH] omap3: workaround for omap3 cache issue
a0393566local (none)
- [U-Boot] [PATCH] omap3evm: env: Fix default console
Sanjeev Premi
- [U-Boot] [PATCH] omap3evm: env: Fix default console
Paulraj, Sandeep
- [U-Boot] [PATCH] omap3evm: Pass 'mem' argument to linux kernel
Sanjeev Premi
- [U-Boot] [PATCH] omap3evm: Pass 'mem' argument to linux kernel
Igor Grinberg
- [U-Boot] [PATCH] omap3evm: Pass 'mem' argument to linux kernel
Premi, Sanjeev
- [U-Boot] [PATCH] omap3evm: Pass 'mem' argument to linux kernel
Wolfgang Denk
- [U-Boot] [PATCH] omap3evm: Pass 'mem' argument to linux kernel
Wolfgang Denk
- [U-Boot] [PATCH] omap3evm: Set environment variable 'ethaddr'
Sanjeev Premi
- [U-Boot] [PATCH] omap3evm: Set environment variable 'ethaddr'
Wolfgang Denk
- [U-Boot] [PATCH] omap3evm: Set environment variable 'ethaddr'
Premi, Sanjeev
- [U-Boot] [PATCH] omap3evm: Set environment variable 'ethaddr'
Wolfgang Denk
- [U-Boot] [PATCH] omap3evm: Set environment variable 'ethaddr'
Premi, Sanjeev
- [U-Boot] [PATCH] omap4: update maintainer for omap4 boards
Aneesh V
- [U-Boot] [PATCH] omap4: update maintainer for omap4 boards
Steve Sakoman
- [U-Boot] [PATCH] omap4: update maintainer for omap4 boards
Aneesh V
- [U-Boot] [PATCH] omap4_panda: Ignore omap4 SPL called MLO
Albert ARIBAUD
- [U-Boot] [PATCH] OMAP: Add function to get state of a GPIO output
V, Aneesh
- [U-Boot] [PATCH] OMAP: Add function to get state of a GPIO output
Joel A Fernandes
- [U-Boot] [PATCH] OMAP: Add function to get state of a GPIO output
s-paulraj at ti.com
- [U-Boot] [PATCH] OMAP: Add function to get state of a GPIO output
Paulraj, Sandeep
- [U-Boot] [PATCH] OMAP: Add function to get state of a GPIO output
Premi, Sanjeev
- [U-Boot] [PATCH] omap: beagle: Use ubifs instead of jffs2 for nand boot
Kooi, Koen
- [U-Boot] [PATCH] omap: beagle: Use ubifs instead of jffs2 for nand boot
Steve Sakoman
- [U-Boot] [PATCH] omap: beagle: Use ubifs instead of jffs2 for nand boot
Steve Sakoman
- [U-Boot] [PATCH] omap: TWL4030 Bump VMMC1 interface voltage from 3V to 3.15V
Ash Charles
- [U-Boot] [PATCH] omap: TWL4030 Bump VMMC1 interface voltage from 3V to 3.15V
Steve Sakoman
- [U-Boot] [PATCH] ORIGEN : enable device tree support
angus.ainslie at linaro.org
- [U-Boot] [PATCH] ORIGEN : use absolute paths for tools directory
Angus Ainslie
- [U-Boot] [PATCH] overo: Set IEN on GPMC_CLK to support CS's that use synchronous clocking.
Philip Balister
- [U-Boot] [PATCH] part: show efi partition name when print out partition info
Lei Wen
- [U-Boot] [PATCH] part: show efi partition name when print out partition info
Marek Vasut
- [U-Boot] [PATCH] part: show efi partition name when print out partition info
Marek Vasut
- [U-Boot] [PATCH] part: show efi partition name when print out partition info
Wolfgang Denk
- [U-Boot] [PATCH] part: show efi partition name when print out partition info
Lei Wen
- [U-Boot] [PATCH] pm9261: init serial console before relocation
Asen Chavdarov Dimov
- [U-Boot] [PATCH] pm9263: init serial console before relocation
Asen Chavdarov Dimov
- [U-Boot] [PATCH] pm9263: save environment at the NOR Flash end
Asen Chavdarov Dimov
- [U-Boot] [PATCH] pm9263: save environment at the NOR Flash end
Wolfgang Denk
- [U-Boot] [PATCH] pm9g45: init serial console before relocation
Asen Chavdarov Dimov
- [U-Boot] [PATCH] post, arm: make post support for arm compile clean
Heiko Schocher
- [U-Boot] [PATCH] powerpc/83xx: move km 83xx specific i2c code to km83xx_i2c
Holger Brunck
- [U-Boot] [PATCH] powerpc/85xx: Add support for setting up RAID engine liodns on P5020
Kumar Gala
- [U-Boot] [PATCH] powerpc/85xx: Cleanup how SVR_MAJ() is defined on MPC8536
Kumar Gala
- [U-Boot] [PATCH] powerpc/85xx: corenet_ds: increase console buffer size to 1024
Brian Grayson
- [U-Boot] [PATCH] powerpc/85xx: corenet_ds: increase console buffer size to 1024
Kumar Gala
- [U-Boot] [PATCH] powerpc/85xx: corenet_ds: increase console buffer size to 1024
Wolfgang Denk
- [U-Boot] [PATCH] powerpc/85xx: corenet_ds: increase console buffer size to 1024
Wolfgang Denk
- [U-Boot] [PATCH] powerpc/85xx: corenet_ds: increase console buffer size to 1024
Scott Wood
- [U-Boot] [PATCH] powerpc/85xx: corenet_ds: increase console buffer size to 1024
Wolfgang Denk
- [U-Boot] [PATCH] powerpc/85xx: corenet_ds: increase console buffer size to 1024
Scott Wood
- [U-Boot] [PATCH] powerpc/85xx: corenet_ds: increase console buffer size to 1024
Wolfgang Denk
- [U-Boot] [PATCH] powerpc/85xx: corenet_ds: increase console buffer size to 1024
Kim Phillips
- [U-Boot] [PATCH] powerpc/85xx: corenet_ds: increase console buffer size to 1024
Kim Phillips
- [U-Boot] [PATCH] powerpc/85xx: corenet_ds: increase console buffer size to 1024
Kim Phillips
- [U-Boot] [PATCH] powerpc/85xx: corenet_ds: increase console buffer size to 1024
Kim Phillips
- [U-Boot] [PATCH] powerpc/85xx: Enable CMD_REGINFO on corenet boards
Kumar Gala
- [U-Boot] [PATCH] powerpc/85xx: Enable CMD_REGINFO on corenet boards
Kumar Gala
- [U-Boot] [PATCH] powerpc/85xx: Enable CMD_REGINFO on corenet boards
Tabi Timur-B04825
- [U-Boot] [PATCH] powerpc/85xx: Fix USB protocol definitions for P1020RDB
Kumar Gala
- [U-Boot] [PATCH] powerpc/85xx: p2041rdb - Remove unused 'execute' perm in TLB entries
Kumar Gala
- [U-Boot] [PATCH] powerpc/85xx: refactor common P-Series CoreNet files for FSL boards
Kumar Gala
- [U-Boot] [PATCH] powerpc/85xx: Refactor P2041RDB to use common p_corenet files
Kumar Gala
- [U-Boot] [PATCH] powerpc/85xx: Refactor some defines out of corenet_ds.h
Kumar Gala
- [U-Boot] [PATCH] powerpc/p2041rdb: add more ddr frequencies support
Shaohui Xie
- [U-Boot] [PATCH] powerpc/p3060: Add SoC related support for P3060 platform
John Schmoller
- [U-Boot] [PATCH] powerpc/p3060: Add SoC related support for P3060 platform
Kumar Gala
- [U-Boot] [PATCH] powerpc/p3060: Add SoC related support for P3060 platform
Kumar Gala
- [U-Boot] [PATCH] powerpc/p3060qds: Add board related support for P3060QDS platform
Kumar Gala
- [U-Boot] [PATCH] ppc460: read get_sys_info from CPR registers instead of STRP registers
Tirumala Marri
- [U-Boot] [PATCH] ppc460: read get_sys_info from CPR registers instead of STRP registers
Tirumala Marri
- [U-Boot] [PATCH] PPC4xx: ALPR: constify FPGA code
Wolfgang Denk
- [U-Boot] [PATCH] PPC4xx: ALPR: constify FPGA code
Stefan Roese
- [U-Boot] [PATCH] PPC4xx: ALPR: constify FPGA code
Sergei Shtylyov
- [U-Boot] [PATCH] PPC4xx: ALPR: constify FPGA code
Wolfgang Denk
- [U-Boot] [PATCH] PPC4xx: ALPR: constify FPGA code
Wolfgang Denk
- [U-Boot] [PATCH] ppc4xx: Flush dcache after DDR2 autocalibration with caches on
Stefan Roese
- [U-Boot] [PATCH] ppc4xx: Flush dcache after DDR2 autocalibration with caches on
Stefan Roese
- [U-Boot] [PATCH] punt unused clean/distclean targets
Mike Frysinger
- [U-Boot] [PATCH] punt unused clean/distclean targets
Wolfgang Denk
- [U-Boot] [PATCH] punt unused clean/distclean targets
Mike Frysinger
- [U-Boot] [PATCH] punt unused clean/distclean targets
Graeme Russ
- [U-Boot] [PATCH] punt unused clean/distclean targets
Mike Frysinger
- [U-Boot] [PATCH] punt unused clean/distclean targets
Marek Vasut
- [U-Boot] [PATCH] punt unused clean/distclean targets
Graeme Russ
- [U-Boot] [PATCH] punt unused clean/distclean targets
Mike Frysinger
- [U-Boot] [PATCH] punt unused clean/distclean targets
Mike Frysinger
- [U-Boot] [PATCH] punt unused clean/distclean targets
Wolfgang Denk
- [U-Boot] [PATCH] punt unused clean/distclean targets
Wolfgang Denk
- [U-Boot] [PATCH] punt unused clean/distclean targets
Mike Frysinger
- [U-Boot] [PATCH] punt unused clean/distclean targets
Scott Wood
- [U-Boot] [PATCH] PXA: FIX: Deep-sleep return address in stored in PSPR
Marek Vasut
- [U-Boot] [PATCH] PXA: FIX: Deep-sleep return address in stored in PSPR
Albert ARIBAUD
- [U-Boot] [PATCH] PXA: FIX: Deep-sleep return address in stored in PSPR
Marek Vasut
- [U-Boot] [PATCH] PXA: FIX: Deep-sleep return address in stored in PSPR
Wolfgang Denk
- [U-Boot] [PATCH] PXA: FIX: Deep-sleep return address in stored in PSPR
Marek Vasut
- [U-Boot] [PATCH] s5p-mmc: Fix ambiguous setting of data transfer width
Andy Fleming
- [U-Boot] [PATCH] s5p-mmc: Fix ambiguous setting of data transfer width
Minkyu Kang
- [U-Boot] [PATCH] s5p-mmc: Fix ambiguous setting of data transfer width
Wolfgang Denk
- [U-Boot] [PATCH] s5p-mmc: Fix ambiguous setting of data transfer width
Minkyu Kang
- [U-Boot] [PATCH] sbc82xx: delete support for obsolete SBC8240/SBC8260
Paul Gortmaker
- [U-Boot] [PATCH] sf: fix debug format string warning
Mike Frysinger
- [U-Boot] [PATCH] sf: fix debug format string warning
Wolfgang Denk
- [U-Boot] [PATCH] sf: winbond: Add support for the Winbond W25X40
Wolfgang Denk
- [U-Boot] [PATCH] Small refactor to remove duplicate serial code
Simon Glass
- [U-Boot] [PATCH] smc911x: Fix build warnings
Wolfgang Denk
- [U-Boot] [PATCH] smc911x: Fix build warnings
Wolfgang Denk
- [U-Boot] [PATCH] spi/eon: add support for new EON spi flash EN25Q32B
Shaohui Xie
- [U-Boot] [PATCH] stdio: Fix a possible buffer overflow
Wolfgang Denk
- [U-Boot] [PATCH] tegra2: Enable data cache
Simon Glass
- [U-Boot] [PATCH] tegra2: Enable data cache
Mike Frysinger
- [U-Boot] [PATCH] tegra2: Enable data cache
Marek Vasut
- [U-Boot] [PATCH] tegra2: Enable data cache
Simon Glass
- [U-Boot] [PATCH] tegra2: Enable data cache
Aneesh V
- [U-Boot] [PATCH] tegra2: Enable data cache
Simon Glass
- [U-Boot] [PATCH] tegra2: Enable data cache
Mike Frysinger
- [U-Boot] [PATCH] tegra2: Enable data cache
Albert ARIBAUD
- [U-Boot] [PATCH] tegra2: Enable data cache
Mike Frysinger
- [U-Boot] [PATCH] tegra2: Enable data cache
Albert ARIBAUD
- [U-Boot] [PATCH] tegra2: Enable data cache
Mike Frysinger
- [U-Boot] [PATCH] tegra2: Enable data cache
Simon Glass
- [U-Boot] [PATCH] tegra2: fix warning: "assert" redefined
Wolfgang Denk
- [U-Boot] [PATCH] tegra2: fix warning: "assert" redefined
Wolfgang Denk
- [U-Boot] [PATCH] tegra2: fix warning: "assert" redefined
Simon Glass
- [U-Boot] [PATCH] UBI: fix endless loop when a bitflip was detected
Holger Brunck
- [U-Boot] [PATCH] UBI: fix endless loop when a bitflip was detected
Holger Brunck
- [U-Boot] [PATCH] UBIFS: Change ubifsload to set the filesize variable
Bastian Ruppert
- [U-Boot] [PATCH] UBIFS: Change ubifsload to set the filesize variable
Wolfgang Denk
- [U-Boot] [PATCH] UBIFS: Change ubifsload to set the filesize variable
Marek Vasut
- [U-Boot] [PATCH] UBIFS: Change ubifsload to set the filesize variable
Wolfgang Denk
- [U-Boot] [PATCH] UBIFS: Change ubifsload to set the filesize variable
Marek Vasut
- [U-Boot] [PATCH] UBIFS: fix warning: format '%lX' expects type 'long unsigned int'
Wolfgang Denk
- [U-Boot] [PATCH] UBIFS: fix warning: format '%lX' expects type 'long unsigned int'
Wolfgang Denk
- [U-Boot] [PATCH] USB: Add functionality to poll the USB keyboard via control EP
Marek Vasut
- [U-Boot] [PATCH] USB: Add usb_event_poll() to get keyboards working with EHCI
Remy Bohmer
- [U-Boot] [PATCH] USB: Add usb_event_poll() to get keyboards working with EHCI
Marek Vasut
- [U-Boot] [PATCH] USB: Add usb_event_poll() to get keyboards working with EHCI
Remy Bohmer
- [U-Boot] [PATCH] USB: Add usb_event_poll() to get keyboards working with EHCI
Marek Vasut
- [U-Boot] [PATCH] usb: Move ehci.h and ehci-core.h to include/usb directory
Marek Vasut
- [U-Boot] [PATCH] usb: Move ehci.h and ehci-core.h to include/usb directory
Fabio Estevam
- [U-Boot] [PATCH] usb: Move ehci.h and ehci-core.h to include/usb directory
Marek Vasut
- [U-Boot] [PATCH] usb: Move ehci.h and ehci-core.h to include/usb directory
Fabio Estevam
- [U-Boot] [PATCH] utx8245: fix build breakage due to assert()
Wolfgang Denk
- [U-Boot] [PATCH] utx8245: fix build breakage due to assert()
Wolfgang Denk
- [U-Boot] [PATCH] video: Fix build error with global inclusion of videomodes
Wolfgang Denk
- [U-Boot] [PATCH] video: Fix build error with global inclusion of videomodes
Kumar Gala
- [U-Boot] [PATCH] VIDEO: mb86r0xgdc.c: fix warning: unused variable 'i'
Anatolij Gustschin
- [U-Boot] [PATCH] VIDEO: mb86r0xgdc.c: fix warning: unused variable 'i'
Wolfgang Denk
- [U-Boot] [PATCH] x86: turn off cache: set control register properly
Marek Vasut
- [U-Boot] [PATCH] x86: turn off cache: set control register properly
Ondra Kupka
- [U-Boot] [PATCH] x86: turn off cache: set control register properly
Marek Vasut
- [U-Boot] [PATCH] x86: turn off cache: set control register properly
Ondrej Kupka
- [U-Boot] [PATCH] zmx25: Fix build warning by defining CONFIG_DISPLAY_CPUINFO
Fabio Estevam
- [U-Boot] [PATCH]: davinci: Replace CONFIG_PRELOADER with CONFIG_SPL_BUILD in board/davinci/common/misc.c
Heiko Schocher
- [U-Boot] [PATCH]: davinci: Replace CONFIG_PRELOADER with CONFIG_SPL_BUILD in board/davinci/common/misc.c
Sughosh Ganu
- [U-Boot] [PATCH]: davinci: Replace CONFIG_PRELOADER with CONFIG_SPL_BUILD in board/davinci/common/misc.c
Stefano Babic
- [U-Boot] [PATCH]: davinci: Replace CONFIG_PRELOADER with CONFIG_SPL_BUILD in board/davinci/common/misc.c
Sughosh Ganu
- [U-Boot] [PATCHv2] omap3evm: Pass 'mem' argument to linux kernel
Sanjeev Premi
- [U-Boot] [PATCHv2] omap3evm: Pass 'mem' argument to linux kernel
Tom Rini
- [U-Boot] [PATCHv2] omap3evm: Pass 'mem' argument to linux kernel
Premi, Sanjeev
- [U-Boot] [PATCHv2] omap3evm: Pass 'mem' argument to linux kernel
Tom Rini
- [U-Boot] [PATCHv2] omap3evm: Pass 'mem' argument to linux kernel
Premi, Sanjeev
- [U-Boot] [PATCHv2] omap3evm: Pass 'mem' argument to linux kernel
Wolfgang Denk
- [U-Boot] [PATCHv2] omap3evm: Pass 'mem' argument to linux kernel
Wolfgang Denk
- [U-Boot] [PATCHv5] new tool mkenvimage: generates an env image from an arbitrary config file
Mike Frysinger
- [U-Boot] [PATCHv5] new tool mkenvimage: generates an env image from an arbitrary config file
David Wagner
- [U-Boot] [PATCHv6] new tool mkenvimage: generates an env image from an arbitrary config file
Mike Frysinger
- [U-Boot] [PATCHv6] new tool mkenvimage: generates an env image from an arbitrary config file
David Wagner
- [U-Boot] [PATCHv6] new tool mkenvimage: generates an env image from an arbitrary config file
Thomas Petazzoni
- [U-Boot] [PATCHv7] new tool mkenvimage: generates an env image from an arbitrary config file
David Wagner
- [U-Boot] [PATCHv8] new tool mkenvimage: generates an env image from an arbitrary config file
David Wagner
- [U-Boot] [Resend PATCH V2 (forgot generic.c)] mx31: provide readable WEIM CS accessor
Helmut Raiger
- [U-Boot] [Resend PATCH V2 (forgot generic.c)] mx31: provide readable WEIM CS accessor
Wolfgang Denk
- [U-Boot] [Resend PATCH V2 (forgot generic.c)] mx31: provide readable WEIM CS accessor
Stefano Babic
- [U-Boot] [Resend PATCH V2 (forgot generic.c)] mx31: provide readable WEIM CS accessor
Helmut Raiger
- [U-Boot] [Resend PATCH V2 (forgot generic.c)] mx31: provide readable WEIM CS accessor
Stefano Babic
- [U-Boot] [RESEND PATCH v3] Add assert() for debug assertions
Simon Glass
- [U-Boot] [Resend PATCH V3] mx31: provide readable WEIM CS accessor
Stefano Babic
- [U-Boot] [Resend PATCH V3] mx31: provide readable WEIM CS accessor
Helmut Raiger
- [U-Boot] [RFC 0/2] Generic PMIC driver
Lukasz Majewski
- [U-Boot] [RFC 0/2] Generic PMIC driver
Stefano Babic
- [U-Boot] [RFC 0/2] Generic PMIC driver
Lukasz Majewski
- [U-Boot] [RFC 0/2] Generic PMIC driver
Stefano Babic
- [U-Boot] [RFC 0/3] omap: gpio: User generic (instead of custom) API
Luca Ceresoli
- [U-Boot] [RFC 0/3] omap: gpio: User generic (instead of custom) API
Premi, Sanjeev
- [U-Boot] [RFC 0/3] omap: gpio: User generic (instead of custom) API
Premi, Sanjeev
- [U-Boot] [RFC 1/2] misc:pmic New generic pmic driver
Lukasz Majewski
- [U-Boot] [RFC 2/2] misc:pmic:max8998: Support for max8998 pmic
Lukasz Majewski
- [U-Boot] [RFC PATCH 0/20] New 'sandbox' test architecture for U-Boot
Graeme Russ
- [U-Boot] [RFC PATCH 0/20] New 'sandbox' test architecture for U-Boot
Simon Glass
- [U-Boot] [RFC PATCH 0/20] New 'sandbox' test architecture for U-Boot
Simon Glass
- [U-Boot] [RFC PATCH 0/4 v1] Use fdt to init mvrtc driver for dreamplug
Jason Cooper
- [U-Boot] [RFC PATCH 0/4 v1] Use fdt to init mvrtc driver for dreamplug
Simon Glass
- [U-Boot] [RFC PATCH 0/4 v1] Use fdt to init mvrtc driver for dreamplug
Jason
- [U-Boot] [RFC PATCH 0/4] Run-time configuration of U-Boot via a flat device tree (fdt)
Simon Glass
- [U-Boot] [RFC PATCH 0/4] Run-time configuration of U-Boot via a flat device tree (fdt)
Mike Frysinger
- [U-Boot] [RFC PATCH 0/4] Run-time configuration of U-Boot via a flat device tree (fdt)
Jerry Van Baren
- [U-Boot] [RFC PATCH 0/4] Run-time configuration of U-Boot via a flat device tree (fdt)
Simon Glass
- [U-Boot] [RFC PATCH 0/4] Run-time configuration of U-Boot via a flat device tree (fdt)
Simon Glass
- [U-Boot] [RFC PATCH 01/20] sandbox: Add architecture header files
Mike Frysinger
- [U-Boot] [RFC PATCH 01/20] sandbox: Add architecture header files
Simon Glass
- [U-Boot] [RFC PATCH 02/20] sandbox: Add architecture image support
Marek Vasut
- [U-Boot] [RFC PATCH 02/20] sandbox: Add architecture image support
Simon Glass
- [U-Boot] [RFC PATCH 02/20] sandbox: Add architecture image support
Simon Glass
- [U-Boot] [RFC PATCH 03/20] sandbox: Add compiler defines to support a 64-bit x86_64 platform
Mike Frysinger
- [U-Boot] [RFC PATCH 03/20] sandbox: Add compiler defines to support a 64-bit x86_64 platform
Simon Glass
- [U-Boot] [RFC PATCH 04/20] sandbox: Add cpu files
Simon Glass
- [U-Boot] [RFC PATCH 04/20] sandbox: Add cpu files
Mike Frysinger
- [U-Boot] [RFC PATCH 04/20] sandbox: Add cpu files
Simon Glass
- [U-Boot] [RFC PATCH 04/20] sandbox: Add cpu files
Wolfgang Denk
- [U-Boot] [RFC PATCH 04/20] sandbox: Add cpu files
Simon Glass
- [U-Boot] [RFC PATCH 04/20] sandbox: Add cpu files
Mike Frysinger
- [U-Boot] [RFC PATCH 04/20] sandbox: Add cpu files
Simon Glass
- [U-Boot] [RFC PATCH 04/20] sandbox: Add cpu files
Anton Staaf
- [U-Boot] [RFC PATCH 04/20] sandbox: Add cpu files
Wolfgang Denk
- [U-Boot] [RFC PATCH 04/20] sandbox: Add cpu files
Mike Frysinger
- [U-Boot] [RFC PATCH 04/20] sandbox: Add cpu files
Simon Glass
- [U-Boot] [RFC PATCH 05/20] sandbox: Add architecture lib files
Simon Glass
- [U-Boot] [RFC PATCH 05/20] sandbox: Add architecture lib files
Mike Frysinger
- [U-Boot] [RFC PATCH 06/20] sandbox: Allow board_init_f() and board_init_r() to return
Simon Glass
- [U-Boot] [RFC PATCH 06/20] sandbox: Allow board_init_f() and board_init_r() to return
Mike Frysinger
- [U-Boot] [RFC PATCH 06/20] sandbox: Allow board_init_f() and board_init_r() to return
Wolfgang Denk
- [U-Boot] [RFC PATCH 06/20] sandbox: Allow board_init_f() and board_init_r() to return
Mike Frysinger
- [U-Boot] [RFC PATCH 06/20] sandbox: Allow board_init_f() and board_init_r() to return
Simon Glass
- [U-Boot] [RFC PATCH 06/20] sandbox: Allow board_init_f() and board_init_r() to return
Simon Glass
- [U-Boot] [RFC PATCH 06/20] sandbox: Allow board_init_f() and board_init_r() to return
Simon Glass
- [U-Boot] [RFC PATCH 06/20] sandbox: Allow board_init_f() and board_init_r() to return
Anton Staaf
- [U-Boot] [RFC PATCH 06/20] sandbox: Allow board_init_f() and board_init_r() to return
Simon Glass
- [U-Boot] [RFC PATCH 06/20] sandbox: Allow board_init_f() and board_init_r() to return
Anton Staaf
- [U-Boot] [RFC PATCH 07/20] sandbox: Add sandbox board
Simon Glass
- [U-Boot] [RFC PATCH 07/20] sandbox: Add sandbox board
Mike Frysinger
- [U-Boot] [RFC PATCH 08/20] sandbox: Add board info for architecture
Simon Glass
- [U-Boot] [RFC PATCH 09/20] sandbox: Add bootm support
Simon Glass
- [U-Boot] [RFC PATCH 09/20] sandbox: Add bootm support
Mike Frysinger
- [U-Boot] [RFC PATCH 09/20] sandbox: Add bootm support
Simon Glass
- [U-Boot] [RFC PATCH 1/4 v1] fdt: remove i2c example code.
Jason Cooper
- [U-Boot] [RFC PATCH 1/4 v1] fdt: remove i2c example code.
Kumar Gala
- [U-Boot] [RFC PATCH 1/4 v1] fdt: remove i2c example code.
Jason
- [U-Boot] [RFC PATCH 1/4] fdt: ARM: Add device tree control of U-Boot (CONFIG_OF_CONTROL)
Simon Glass
- [U-Boot] [RFC PATCH 1/4] fdt: ARM: Add device tree control of U-Boot (CONFIG_OF_CONTROL)
Mike Frysinger
- [U-Boot] [RFC PATCH 1/4] fdt: ARM: Add device tree control of U-Boot (CONFIG_OF_CONTROL)
Simon Glass
- [U-Boot] [RFC PATCH 10/20] sandbox: Disable built-in malloc
Simon Glass
- [U-Boot] [RFC PATCH 11/20] sandbox: Disable standalone/API support
Simon Glass
- [U-Boot] [RFC PATCH 12/20] sandbox: Force command sections to be 4-byte aligned
Simon Glass
- [U-Boot] [RFC PATCH 13/20] sandbox: Add OS dependent layer
Simon Glass
- [U-Boot] [RFC PATCH 13/20] sandbox: Add OS dependent layer
Mike Frysinger
- [U-Boot] [RFC PATCH 13/20] sandbox: Add OS dependent layer
Simon Glass
- [U-Boot] [RFC PATCH 14/20] sandbox: Add board_init()
Simon Glass
- [U-Boot] [RFC PATCH 15/20] sandbox: Add main program
Simon Glass
- [U-Boot] [RFC PATCH 16/20] sandbox: Add serial uart
Simon Glass
- [U-Boot] [RFC PATCH 17/20] sandbox: Add basic config file
Simon Glass
- [U-Boot] [RFC PATCH 17/20] sandbox: Add basic config file
Mike Frysinger
- [U-Boot] [RFC PATCH 17/20] sandbox: Add basic config file
Simon Glass
- [U-Boot] [RFC PATCH 17/20] sandbox: Add basic config file
Mike Frysinger
- [U-Boot] [RFC PATCH 17/20] sandbox: Add basic config file
Simon Glass
- [U-Boot] [RFC PATCH 18/20] sandbox: Remove unused variable warnings
Mike Frysinger
- [U-Boot] [RFC PATCH 18/20] sandbox: Remove unused variable warnings
Simon Glass
- [U-Boot] [RFC PATCH 18/20] sandbox: Remove unused variable warnings
Mike Frysinger
- [U-Boot] [RFC PATCH 18/20] sandbox: Remove unused variable warnings
Simon Glass
- [U-Boot] [RFC PATCH 18/20] sandbox: Remove unused variable warnings
Simon Glass
- [U-Boot] [RFC PATCH 19/20] sandbox: Use uintptr_t for 32/64-bit compatibility
Simon Glass
- [U-Boot] [RFC PATCH 2/4 v1] fdt_decode: make more available.
Jason Cooper
- [U-Boot] [RFC PATCH 2/4 v1] fdt_decode: make more available.
Simon Glass
- [U-Boot] [RFC PATCH 2/4 v1] fdt_decode: make more available.
Jason
- [U-Boot] [RFC PATCH 2/4] fdt: Add support for embedded device tree (CONFIG_OF_EMBED)
Simon Glass
- [U-Boot] [RFC PATCH 20/20] sandbox: Makefile changes to build sandbox architecture
Simon Glass
- [U-Boot] [RFC PATCH 3/4 v1] mvrtc: add fdt support.
Jason Cooper
- [U-Boot] [RFC PATCH 3/4 v1] mvrtc: add fdt support.
Simon Glass
- [U-Boot] [RFC PATCH 3/4 v1] mvrtc: add fdt support.
Jason
- [U-Boot] [RFC PATCH 3/4] fdt: Add support for a separate device tree (CONFIG_OF_SEPARATE)
Simon Glass
- [U-Boot] [RFC PATCH 4/4 v1] dreamplug: enable fdt
Jason Cooper
- [U-Boot] [RFC PATCH 4/4 v1] dreamplug: enable fdt
Simon Glass
- [U-Boot] [RFC PATCH 4/4 v1] dreamplug: enable fdt
Jason
- [U-Boot] [RFC PATCH 4/4] fdt: ARM: Implement embedded and separate device tree
Simon Glass
- [U-Boot] [RFC PATCH v2 0/20] New 'sandbox' test architecture for U-Boot
Mike Frysinger
- [U-Boot] [RFC PATCH v2 0/20] New 'sandbox' test architecture for U-Boot
Simon Glass
- [U-Boot] [RFC PATCH v2 0/20] New 'sandbox' test architecture for U-Boot
Simon Glass
- [U-Boot] [RFC PATCH v2 0/6] Run-time configuration of U-Boot via a flat device tree (fdt)
Simon Glass
- [U-Boot] [RFC PATCH v2 0/6] Run-time configuration of U-Boot via a flat device tree (fdt)
Simon Glass
- [U-Boot] [RFC PATCH v2 01/20] sandbox: Add architecture header files
Simon Glass
- [U-Boot] [RFC PATCH v2 02/20] Fix use of int as pointer in image.c
Mike Frysinger
- [U-Boot] [RFC PATCH v2 02/20] Fix use of int as pointer in image.c
Simon Glass
- [U-Boot] [RFC PATCH v2 02/20] Fix use of int as pointer in image.c
Simon Glass
- [U-Boot] [RFC PATCH v2 03/20] sandbox: Add architecture image support
Simon Glass
- [U-Boot] [RFC PATCH v2 03/20] sandbox: Add architecture image support
Mike Frysinger
- [U-Boot] [RFC PATCH v2 03/20] sandbox: Add architecture image support
Simon Glass
- [U-Boot] [RFC PATCH v2 03/20] sandbox: Add architecture image support
Mike Frysinger
- [U-Boot] [RFC PATCH v2 03/20] sandbox: Add architecture image support
Simon Glass
- [U-Boot] [RFC PATCH v2 04/20] sandbox: Add compiler defines to support a 64-bit x86_64 platform
Simon Glass
- [U-Boot] [RFC PATCH v2 05/20] sandbox: Add cpu files
Simon Glass
- [U-Boot] [RFC PATCH v2 06/20] sandbox: Add architecture lib files
Simon Glass
- [U-Boot] [RFC PATCH v2 07/20] sandbox: Add sandbox board
Simon Glass
- [U-Boot] [RFC PATCH v2 08/20] sandbox: Add board info for architecture
Simon Glass
- [U-Boot] [RFC PATCH v2 09/20] sandbox: Add bootm support
Simon Glass
- [U-Boot] [RFC PATCH v2 1/6] fdt: ARM: Add device tree control of U-Boot (CONFIG_OF_CONTROL)
Marek Vasut
- [U-Boot] [RFC PATCH v2 1/6] fdt: ARM: Add device tree control of U-Boot (CONFIG_OF_CONTROL)
Marek Vasut
- [U-Boot] [RFC PATCH v2 1/6] fdt: ARM: Add device tree control of U-Boot (CONFIG_OF_CONTROL)
Wolfgang Denk
- [U-Boot] [RFC PATCH v2 1/6] fdt: ARM: Add device tree control of U-Boot (CONFIG_OF_CONTROL)
Wolfgang Denk
- [U-Boot] [RFC PATCH v2 1/6] fdt: ARM: Add device tree control of U-Boot (CONFIG_OF_CONTROL)
Wolfgang Denk
- [U-Boot] [RFC PATCH v2 1/6] fdt: ARM: Add device tree control of U-Boot (CONFIG_OF_CONTROL)
Mike Frysinger
- [U-Boot] [RFC PATCH v2 1/6] fdt: ARM: Add device tree control of U-Boot (CONFIG_OF_CONTROL)
Simon Glass
- [U-Boot] [RFC PATCH v2 1/6] fdt: ARM: Add device tree control of U-Boot (CONFIG_OF_CONTROL)
Simon Glass
- [U-Boot] [RFC PATCH v2 1/6] fdt: ARM: Add device tree control of U-Boot (CONFIG_OF_CONTROL)
Simon Glass
- [U-Boot] [RFC PATCH v2 1/6] fdt: ARM: Add device tree control of U-Boot (CONFIG_OF_CONTROL)
Simon Glass
- [U-Boot] [RFC PATCH v2 1/6] fdt: ARM: Add device tree control of U-Boot (CONFIG_OF_CONTROL)
Simon Glass
- [U-Boot] [RFC PATCH v2 10/20] sandbox: Disable built-in malloc
Simon Glass
- [U-Boot] [RFC PATCH v2 11/20] sandbox: Disable standalone/API support
Simon Glass
- [U-Boot] [RFC PATCH v2 12/20] sandbox: Force command sections to be 4-byte aligned
Simon Glass
- [U-Boot] [RFC PATCH v2 13/20] sandbox: Add OS dependent layer
Simon Glass
- [U-Boot] [RFC PATCH v2 13/20] sandbox: Add OS dependent layer
Mike Frysinger
- [U-Boot] [RFC PATCH v2 13/20] sandbox: Add OS dependent layer
Simon Glass
- [U-Boot] [RFC PATCH v2 13/20] sandbox: Add OS dependent layer
Mike Frysinger
- [U-Boot] [RFC PATCH v2 13/20] sandbox: Add OS dependent layer
Simon Glass
- [U-Boot] [RFC PATCH v2 13/20] sandbox: Add OS dependent layer
Simon Glass
- [U-Boot] [RFC PATCH v2 14/20] sandbox: Add board_init()
Simon Glass
- [U-Boot] [RFC PATCH v2 15/20] sandbox: Add main program
Simon Glass
- [U-Boot] [RFC PATCH v2 16/20] sandbox: Add serial uart
Simon Glass
- [U-Boot] [RFC PATCH v2 17/20] sandbox: Add basic config file
Simon Glass
- [U-Boot] [RFC PATCH v2 18/20] Remove unused variable warnings in cmd_mem, cmd_nvedit
Simon Glass
- [U-Boot] [RFC PATCH v2 19/20] Use uintptr_t for 32/64-bit compatibility
Simon Glass
- [U-Boot] [RFC PATCH v2 2/6] fdt: Add support for embedded device tree (CONFIG_OF_EMBED)
Jason
- [U-Boot] [RFC PATCH v2 2/6] fdt: Add support for embedded device tree (CONFIG_OF_EMBED)
Jason
- [U-Boot] [RFC PATCH v2 2/6] fdt: Add support for embedded device tree (CONFIG_OF_EMBED)
Jason
- [U-Boot] [RFC PATCH v2 2/6] fdt: Add support for embedded device tree (CONFIG_OF_EMBED)
Jason
- [U-Boot] [RFC PATCH v2 2/6] fdt: Add support for embedded device tree (CONFIG_OF_EMBED)
Jason
- [U-Boot] [RFC PATCH v2 2/6] fdt: Add support for embedded device tree (CONFIG_OF_EMBED)
Jason
- [U-Boot] [RFC PATCH v2 2/6] fdt: Add support for embedded device tree (CONFIG_OF_EMBED)
Jason
- [U-Boot] [RFC PATCH v2 2/6] fdt: Add support for embedded device tree (CONFIG_OF_EMBED)
Simon Glass
- [U-Boot] [RFC PATCH v2 2/6] fdt: Add support for embedded device tree (CONFIG_OF_EMBED)
Grant Likely
- [U-Boot] [RFC PATCH v2 2/6] fdt: Add support for embedded device tree (CONFIG_OF_EMBED)
Simon Glass
- [U-Boot] [RFC PATCH v2 2/6] fdt: Add support for embedded device tree (CONFIG_OF_EMBED)
Wolfgang Denk
- [U-Boot] [RFC PATCH v2 2/6] fdt: Add support for embedded device tree (CONFIG_OF_EMBED)
Simon Glass
- [U-Boot] [RFC PATCH v2 2/6] fdt: Add support for embedded device tree (CONFIG_OF_EMBED)
Grant Likely
- [U-Boot] [RFC PATCH v2 2/6] fdt: Add support for embedded device tree (CONFIG_OF_EMBED)
Simon Glass
- [U-Boot] [RFC PATCH v2 2/6] fdt: Add support for embedded device tree (CONFIG_OF_EMBED)
Simon Glass
- [U-Boot] [RFC PATCH v2 2/6] fdt: Add support for embedded device tree (CONFIG_OF_EMBED)
Simon Glass
- [U-Boot] [RFC PATCH v2 2/6] fdt: Add support for embedded device tree (CONFIG_OF_EMBED)
Simon Glass
- [U-Boot] [RFC PATCH v2 2/6] fdt: Add support for embedded device tree (CONFIG_OF_EMBED)
Grant Likely
- [U-Boot] [RFC PATCH v2 2/6] fdt: Add support for embedded device tree (CONFIG_OF_EMBED)
Simon Glass
- [U-Boot] [RFC PATCH v2 2/6] fdt: Add support for embedded device tree (CONFIG_OF_EMBED)
Simon Glass
- [U-Boot] [RFC PATCH v2 2/6] fdt: Add support for embedded device tree (CONFIG_OF_EMBED)
Simon Glass
- [U-Boot] [RFC PATCH v2 20/20] sandbox: Makefile changes to build sandbox architecture
Simon Glass
- [U-Boot] [RFC PATCH v2 3/6] fdt: Add support for a separate device tree (CONFIG_OF_SEPARATE)
Simon Glass
- [U-Boot] [RFC PATCH v2 3/6] fdt: Add support for a separate device tree (CONFIG_OF_SEPARATE)
Simon Glass
- [U-Boot] [RFC PATCH v2 3/6] fdt: Add support for a separate device tree (CONFIG_OF_SEPARATE)
Grant Likely
- [U-Boot] [RFC PATCH v2 4/6] fdt: ARM: Implement embedded and separate device tree
Simon Glass
- [U-Boot] [RFC PATCH v2 5/6] fdt: add decode helper library
Simon Glass
- [U-Boot] [RFC PATCH v2 6/6] fdt: example modification of i2c driver for fdt control
Simon Glass
- [U-Boot] [RFC PATCH] arm: provide a CONFIG flag for disabling relocation
GROYER, Anthony
- [U-Boot] [RFC PATCH] arm: provide a CONFIG flag for disabling relocation
Wolfgang Denk
- [U-Boot] [RFC PATCH] arm: provide a CONFIG flag for disabling relocation
Simon Glass
- [U-Boot] [RFC PATCH] arm: provide a CONFIG flag for disabling relocation
GROYER, Anthony
- [U-Boot] [RFC PATCH] arm: provide a CONFIG flag for disabling relocation
Wolfgang Denk
- [U-Boot] [RFC PATCH] arm: provide a CONFIG flag for disabling relocation
Simon Glass
- [U-Boot] [RFC PATCH] arm: provide a CONFIG flag for disabling relocation
Andreas Bießmann
- [U-Boot] [RFC PATCH] arm: provide a CONFIG flag for disabling relocation
Albert ARIBAUD
- [U-Boot] [RFC PATCH] arm: provide a CONFIG flag for disabling relocation
Albert ARIBAUD
- [U-Boot] [RFC PATCH] arm: provide a CONFIG flag for disabling relocation
Andreas Bießmann
- [U-Boot] [RFC PATCH] arm: provide a CONFIG flag for disabling relocation
Albert ARIBAUD
- [U-Boot] [RFC PATCH] arm: provide a CONFIG flag for disabling relocation
Albert ARIBAUD
- [U-Boot] [RFC PATCH] arm: provide a CONFIG flag for disabling relocation
Andreas Bießmann
- [U-Boot] [RFC PATCH] arm: provide a CONFIG flag for disabling relocation
Aneesh V
- [U-Boot] [RFC PATCH] arm: provide a CONFIG flag for disabling relocation
Albert ARIBAUD
- [U-Boot] [RFC PATCH] arm: provide a CONFIG flag for disabling relocation
Andreas Bießmann
- [U-Boot] [RFC PATCH] arm: provide a CONFIG flag for disabling relocation
Simon Schwarz
- [U-Boot] [RFC] ARM ISA/cpu/SoC code organization for cache and other functions
Jason
- [U-Boot] [RFC] ARM ISA/cpu/SoC code organization for cache and other functions
Jason
- [U-Boot] [RFC] ARM ISA/cpu/SoC code organization for cache and other functions
Albert ARIBAUD
- [U-Boot] [RFC] ARM ISA/cpu/SoC code organization for cache and other functions
Albert ARIBAUD
- [U-Boot] [RFC] Long term ARM ISA/cpu/core code organization
Aneesh V
- [U-Boot] [RFC] Long term ARM ISA/cpu/core code organization (was: [PATCH 3/3 v3] ARM: ARM926EJS - Add cache operations)
Marek Vasut
- [U-Boot] [RFC] Long term ARM ISA/cpu/core code organization (was: [PATCH 3/3 v3] ARM: ARM926EJS - Add cache operations)
Albert ARIBAUD
- [U-Boot] [RFC] Timer API (again!)
Graeme Russ
- [U-Boot] [RFC] Timer API (again!)
J. William Campbell
- [U-Boot] [RFC] Timer API (again!)
Simon Glass
- [U-Boot] [RFC][PATCH] Generate CRC of structure of Global Data for standalone apps
Wolfgang Denk
- [U-Boot] [RFC][PATCH] Generate CRC of structure of Global Data for standalone apps
Wolfgang Denk
- [U-Boot] [RFC][PATCH] Generate CRC of structure of Global Data for standalone apps
Graeme Russ
- [U-Boot] [RFC][PATCH] Generate CRC of structure of Global Data for standalone apps
Graeme Russ
- [U-Boot] [RFC][PATCH] Generate CRC of structure of Global Data for standalone apps
Graeme Russ
- [U-Boot] [RFC][PATCH] Generate CRC of structure of Global Data for standalone apps
Graeme Russ
- [U-Boot] [RFC][PATCH] Generate CRC of structure of Global Data for standalone apps
Albert ARIBAUD
- [U-Boot] [Samsung] [PATCH] ORIGEN : enable device tree support
Chander Kashyap
- [U-Boot] [Samsung] [PATCH] ORIGEN : enable device tree support
Minkyu Kang
- [U-Boot] [STATUS] [ARM] Status for last 13 unclean-building ARM boards
Albert ARIBAUD
- [U-Boot] [STATUS] [ARM] Status for last 13 unclean-building ARM boards
Stefan Roese
- [U-Boot] [STATUS] [ARM] Status for last 13 unclean-building ARM boards
Michael Schwingen
- [U-Boot] [STATUS] [ARM] Status for last 13 unclean-building ARM boards
Albert ARIBAUD
- [U-Boot] [STATUS] [ARM] Status for last 13 unclean-building ARM boards
Michael Schwingen
- [U-Boot] [STATUS] [ARM] Status for last 13 unclean-building ARM boards
Albert ARIBAUD
- [U-Boot] [STATUS] [ARM] Status for last 13 unclean-building ARM boards
Stefan Roese
- [U-Boot] [STATUS] [ARM] Status for last 13 unclean-building ARM boards
Dirk Behme
- [U-Boot] [STATUS] Ready for -rc2?
Wolfgang Denk
- [U-Boot] [STATUS] Ready for -rc2?
Mike Frysinger
- [U-Boot] [STATUS] Ready for -rc2?
Albert ARIBAUD
- [U-Boot] [STATUS] Ready for -rc2?
Jason
- [U-Boot] [STATUS] Ready for -rc2?
Wolfgang Denk
- [U-Boot] [STATUS] Ready for -rc2?
Wolfgang Denk
- [U-Boot] [STATUS] Ready for -rc2?
Wolfgang Denk
- [U-Boot] [STATUS] Ready for -rc2?
Jason
- [U-Boot] [STATUS] Ready for -rc2?
馬克泡
- [U-Boot] [STATUS] Ready for -rc2?
Albert ARIBAUD
- [U-Boot] [STATUS] Ready for -rc2?
Graeme Russ
- [U-Boot] [STATUS] Ready for -rc2?
Jason
- [U-Boot] [STATUS] Release delayed
Wolfgang Denk
- [U-Boot] [STATUS] Release delayed
Albert ARIBAUD
- [U-Boot] [STATUS] Release delayed
Marek Vasut
- [U-Boot] [STATUS] Release delayed
Albert ARIBAUD
- [U-Boot] [STATUS] v2011.09 released, Merge Window is OPEN
Wolfgang Denk
- [U-Boot] [STATUS] v2011.09-rc1 is out
Wolfgang Denk
- [U-Boot] [STATUS] v2011.09-rc1 is out
Mike Frysinger
- [U-Boot] [STATUS] v2011.09-rc1 is out
Helmut Raiger
- [U-Boot] [STATUS] v2011.09-rc1 is out
Scott Wood
- [U-Boot] [STATUS] v2011.09-rc1 is out
Helmut Raiger
- [U-Boot] [STATUS] v2011.09-rc1 is out
Graeme Russ
- [U-Boot] [STATUS] v2011.09-rc1 is out
Stefano Babic
- [U-Boot] [STATUS] v2011.09-rc1 is out
Albert ARIBAUD
- [U-Boot] [STATUS] v2011.09-rc2 is out
Wolfgang Denk
- [U-Boot] [U-Boot PATCH MX31:] smc911x MII made available, ping?
Helmut Raiger
- [U-Boot] [U-Boot PATCH MX31:] smc911x MII made available, ping?
Stefano Babic
- [U-Boot] [U-Boot PATCH MX31:] smc911x MII made available, ping?
Wolfgang Denk
- [U-Boot] [U-Boot PATCH MX31:] smc911x MII made available, ping?
Helmut Raiger
- [U-Boot] [U-Boot, v2] mtd: eLBC NAND: remove elbc_fcm_ctrl->oob_poi
Scott Wood
- [U-Boot] [U-Boot,2/2] smc911x MII made available
Stefano Babic
- [U-Boot] [U-Boot,2/2] smc911x MII made available
Helmut Raiger
- [U-Boot] [U-Boot,2/2] smc911x MII made available
Stefano Babic
- [U-Boot] [u-boot-release] [Patch v3 7/7] powerpc/8xxx: Add support for interactive DDR programming interface
Timur Tabi
- [U-Boot] [u-boot-release] [Patch v3 7/7] powerpc/8xxx: Add support for interactive DDR programming interface
York Sun
- [U-Boot] [u-boot-release] [Patch v3 7/7] powerpc/8xxx: Add support for interactive DDR programming interface
Timur Tabi
- [U-Boot] [U-Boot-Users] Wireless Ethernet
Farooque, Fayaz
- [U-Boot] [U-Boot-Users] Wireless Ethernet
Marek Vasut
- [U-Boot] [U-Boot-Users] Wireless Ethernet
Wolfgang Denk
- [U-Boot] [U-Boot-Users] Wireless Ethernet
Farooque, Fayaz
- [U-Boot] [U-Boot-Users] Wireless Ethernet
Marek Vasut
- [U-Boot] [U-Boot-Users] Wireless Ethernet
Wolfgang Denk
- [U-Boot] [u-boot] CRC / ECC protection of environment
Arno Steffen
- [U-Boot] [u-boot] CRC / ECC protection of environment
Wolfgang Denk
- [U-Boot] [u-boot] CRC / ECC protection of environment
Arno Steffen
- [U-Boot] [u-boot] CRC / ECC protection of environment
Scott Wood
- [U-Boot] [u-boot] CRC / ECC protection of environment
Arno Steffen
- [U-Boot] [u-boot] CRC / ECC protection of environment
Wolfgang Denk
- [U-Boot] [u-boot] CRC / ECC protection of environment
Arno Steffen
- [U-Boot] Advertising invitation from SKS
SKS Media (London)
- [U-Boot] Affordable SEO Services
Riya Singh
- [U-Boot] Alert from the Google UK Office**** Confirm your E-mail usage immediately***
Online Team® UK
- [U-Boot] altbootcmd and failbootcmd
Thomas Johnson
- [U-Boot] altbootcmd and failbootcmd
Detlev Zundel
- [U-Boot] altbootcmd and failbootcmd
Kim Phillips
- [U-Boot] altbootcmd and failbootcmd
Wolfgang Denk
- [U-Boot] altbootcmd and failbootcmd
Thomas Johnson
- [U-Boot] Antwort auf mich dringend bitte <Miss Nicole> ..reply to me urgently please < Miss Nicole >
Nicole Nicole
- [U-Boot] Anyone know anything about the Qualcom Snapdragon APQ8060?
Graeme Russ
- [U-Boot] Appeal for Investment Project
Sumpun Sande
- [U-Boot] Application of patch submitted during the previous Merge Window
Wolfgang Denk
- [U-Boot] Application of patch submitted during the previous Merge Window
Graeme Russ
- [U-Boot] Application of patch submitted during the previous Merge Window
Stefano Babic
- [U-Boot] Application of patch submitted during the previous Merge Window
Graeme Russ
- [U-Boot] Application of patch submitted during the previous Merge Window
Wolfgang Denk
- [U-Boot] Application of patch submitted during the previous Merge Window
Wolfgang Denk
- [U-Boot] Application of patch submitted during the previous Merge Window
Graeme Russ
- [U-Boot] Application of patch submitted during the previous Merge Window
Wolfgang Denk
- [U-Boot] Application of patch submitted during the previous Merge Window
Graeme Russ
- [U-Boot] Application of patch submitted during the previous Merge Window
Graeme Russ
- [U-Boot] Application of patch submitted during the previous Merge Window
stefano babic
- [U-Boot] APPLY FOR LOAN HERE
Ken Morgan Lenders
- [U-Boot] AT91SAM9260 and AT91SAMG20 dataflash saveenv problem
David Pristovnik
- [U-Boot] AT91SAM9260 and AT91SAMG20 dataflash saveenv problem
David Pristovnik
- [U-Boot] Attn: Email Account Owner
petergunto at optusnet.com.au
- [U-Boot] Attn: Webmail Account User,
Webmail Technical Support Help-Desk
- [U-Boot] Auto insurance (9/21/2011)
David Gilmore
- [U-Boot] Aviso Urgente!
Security Alert
- [U-Boot] Best Loan Offer
Excel Funds
- [U-Boot] BITTE LESEN UND ZU MIR SEHR DRINGEND ANTWORTEN ..... VON MISS GRACE JACKSON......PLEASE READ AND REPLY TO ME VERY URGENTLY..... FROM MISS GRACE JACKSON
Grace Grace
- [U-Boot] board locked after pull
Angelo Dureghello
- [U-Boot] Bogus "Warning: failed to set MAC address" on Gumstix Overo
Wolfgang Denk
- [U-Boot] Bogus "Warning: failed to set MAC address" on Gumstix Overo
Philip Balister
- [U-Boot] Bogus "Warning: failed to set MAC address" on Gumstix Overo
Wolfgang Denk
- [U-Boot] Bogus "Warning: failed to set MAC address" on Gumstix Overo
Philip Balister
- [U-Boot] booting single uImage on platforms with different base addresses for SDRAM
Russell King - ARM Linux
- [U-Boot] booting single uImage on platforms with different base addresses for SDRAM
Wolfgang Denk
- [U-Boot] booting single uImage on platforms with different base addresses for SDRAM
Peter De Schrijver
- [U-Boot] booting single uImage on platforms with different base addresses for SDRAM
Nicolas Pitre
- [U-Boot] booting single uImage on platforms with different base addresses for SDRAM
Steve Chen
- [U-Boot] Bottleneck of NAND copy speed
Simon Schwarz
- [U-Boot] Bottleneck of NAND copy speed
Wolfgang Denk
- [U-Boot] Bottleneck of NAND copy speed
Nick Thompson
- [U-Boot] Bottleneck of NAND copy speed
Simon Schwarz
- [U-Boot] Bottleneck of NAND copy speed
Simon Schwarz
- [U-Boot] Bottleneck of NAND copy speed
Scott Wood
- [U-Boot] Breakage of cm4008, cm4116, cm4148 boards
Wolfgang Denk
- [U-Boot] Breakage of cm4008, cm4116, cm4148 boards
Greg Ungerer
- [U-Boot] BSS footprint of FAT very high - SPL issues
Ulf Samuelsson
- [U-Boot] BSS footprint of FAT very high - SPL issues
Wolfgang Denk
- [U-Boot] build breakage w/recent pulls
Kumar Gala
- [U-Boot] build breakage w/recent pulls
Wolfgang Denk
- [U-Boot] build breakage w/recent pulls
Kumar Gala
- [U-Boot] Building u-boot for Walnut board (PPC 405GPr)
Brian S. Park
- [U-Boot] Building u-boot for Walnut board (PPC 405GPr)
Anatolij Gustschin
- [U-Boot] Building u-boot for Walnut board (PPC 405GPr)
Brian S. Park
- [U-Boot] Building u-boot for Walnut board (PPC 405GPr)
Brian S. Park
- [U-Boot] Building u-boot for Walnut board (PPC 405GPr)
Brian S. Park
- [U-Boot] Building u-boot for Walnut board (PPC 405GPr)
Wolfgang Denk
- [U-Boot] Building u-boot for Walnut board (PPC 405GPr)
Wolfgang Denk
- [U-Boot] Building u-boot for Walnut board (PPC 405GPr)
Brian S. Park
- [U-Boot] Business transaction.
Mr. Daniel Tsai
- [U-Boot] Can you handle this?
John Adams
- [U-Boot] Can you help me?<sgtjohnadam at gmail.com>
Philip Y Wong
- [U-Boot] Common arch-specific header files for SOCs
Simon Glass
- [U-Boot] COMPATIBLE TONER CARTRIDGE CHIPS MANUFACTURE
chips33
- [U-Boot] Compile error undefined reference to `__aeabi_unwind_cpp_pr0
Stefano Babic
- [U-Boot] Compile error undefined reference to `__aeabi_unwind_cpp_pr0
Andrew Holt
- [U-Boot] Compile error undefined reference to `__aeabi_unwind_cpp_pr0
Andrew Holt
- [U-Boot] Compile error undefined reference to `__aeabi_unwind_cpp_pr0
Wolfgang Denk
- [U-Boot] Compile error undefined reference to `__aeabi_unwind_cpp_pr0
Wolfgang Denk
- [U-Boot] Compile error undefined reference to `__aeabi_unwind_cpp_pr0
Stefano Babic
- [U-Boot] Compile error undefined reference to `__aeabi_unwind_cpp_pr0
Andrew Holt
- [U-Boot] Compile error undefined reference to `__aeabi_unwind_cpp_pr0
stefano babic
- [U-Boot] confirmar la recepción
Western Union Money Transfer
- [U-Boot] confirmar la recepción
Western Union Money Transfer
- [U-Boot] Congratulations Read The Below Attached File
Promotions
- [U-Boot] CONTACT REV.NELSON KOFFI @+233263951044
Burke, Jason B
- [U-Boot] da830evm build regression due to commit 11a6fb79745b06610b334bada7167e9e0b619851
Albert ARIBAUD
- [U-Boot] da830evm build regression due to commit 11a6fb79745b06610b334bada7167e9e0b619851
Albert ARIBAUD
- [U-Boot] da830evm build regression due to commit 11a6fb79745b06610b334bada7167e9e0b619851
Paulraj, Sandeep
- [U-Boot] De administrador de sistemas
junaida at mmea.gov.my
- [U-Boot] DEAR FRIEND KINDLY VIEW THE ATTACHED FILE AND GET BACK TO ME URGENTLY REGARDS DOUGLAS AKANA
Douglas Akana
- [U-Boot] DEAR FRIEND KINDLY VIEW THE ATTACHED FILE AND GET BACK TO ME URGENTLY REGARDS DOUGLAS AKANA
Douglas Akana
- [U-Boot] Der Gewinner
Euromillion-Microsoft System 2011
- [U-Boot] DMA drivers in U-Boot?
Simon Schwarz
- [U-Boot] DMA drivers in U-Boot?
Mike Frysinger
- [U-Boot] DMA drivers in U-Boot?
Wolfgang Denk
- [U-Boot] environment in NAND
Arno Steffen
- [U-Boot] environment in NAND
Wolfgang Wegner
- [U-Boot] environment in NAND
Marek Vasut
- [U-Boot] environment in NAND
Arno Steffen
- [U-Boot] environment in NAND
Wolfgang Wegner
- [U-Boot] environment in NAND
Arno Steffen
- [U-Boot] environment in NAND
Wolfgang Wegner
- [U-Boot] environment in NAND
Arno Steffen
- [U-Boot] environment in NAND
Wolfgang Wegner
- [U-Boot] environment in NAND
Scott Wood
- [U-Boot] Error Noticed Code 573FKx9.
System Administrator
- [U-Boot] Error Noticed Code 573FKx9.‏
System Administrator
- [U-Boot] Fastboot gadget
Sebastian Andrzej Siewior
- [U-Boot] Fastboot gadget, v2
Sebastian Andrzej Siewior
- [U-Boot] Faster boot time
dtran11
- [U-Boot] Faster boot time
Premi, Sanjeev
- [U-Boot] Faster boot time
Simon Schwarz
- [U-Boot] Faster boot time
Dat Tran
- [U-Boot] Faster boot time
Simon Schwarz
- [U-Boot] Faster boot time
Dat Tran
- [U-Boot] Faster boot time
Simon Schwarz
- [U-Boot] Faster boot time
Dat Tran
- [U-Boot] Faster boot time
Wolfgang Denk
- [U-Boot] flash size with qemu-mips config.
Mijondano Carbura
- [U-Boot] From Office Of . Mr. Terence McCulley
mrterencem8
- [U-Boot] Fwd: Re: Fwd: Link stage error of porting uboot2011-06
Albert ARIBAUD
- [U-Boot] Fwd: U-boot mainline test report on BeagleBoard
Joel A Fernandes
- [U-Boot] Fwd: U-boot mainline test report on BeagleBoard
Simon Glass
- [U-Boot] FYI
Segle, Mary M
- [U-Boot] Generating random numbers
elison.niven at gmail.com
- [U-Boot] git-clone doesn't compile
Athanasios Silis
- [U-Boot] git-clone doesn't compile
Wolfgang Denk
- [U-Boot] Good Day!!!
Amjad Basim
- [U-Boot] Good news?! China Daily Europe advertising - Two-for-One expiring 15th Sept
China Daily Europe (European Edition - Weekly)
- [U-Boot] Greetings!
Anna Giles
- [U-Boot] Hallo
susan bugiba
- [U-Boot] Health insurance (9/27/2011)
David Gilmore
- [U-Boot] hello
rita mpka
- [U-Boot] Hello
Abegail Benson
- [U-Boot] Hello
Rabiu M Hassan
- [U-Boot] Hello
avivan-7 at libero.it
- [U-Boot] Hello
Sanita Abdulkarim
- [U-Boot] Hello
Sanita Abdulkarim
- [U-Boot] Hello
Google Online Promotion 2011
- [U-Boot] hello
Maureen Kayumba
- [U-Boot] Hello Please This Message Is Respectfully Yours!
Gift Ismaila
- [U-Boot] Hello, is urgent
uljdzic at ymail.com
- [U-Boot] hello: 3 1 n
Gerardo Daniel SPINAZZOLA
- [U-Boot] Help: U-Boot on Nokia RX-51 (aka N900)
Pali Rohár
- [U-Boot] Help: U-Boot on Nokia RX-51 (aka N900)
Marek Vasut
- [U-Boot] Help: U-Boot on Nokia RX-51 (aka N900)
Stefano Babic
- [U-Boot] Help: U-Boot on Nokia RX-51 (aka N900)
Pali Rohár
- [U-Boot] Help: U-Boot on Nokia RX-51 (aka N900)
Pali Rohár
- [U-Boot] Help: U-Boot on Nokia RX-51 (aka N900)
Stefano Babic
- [U-Boot] Help: U-Boot on Nokia RX-51 (aka N900)
Marek Vasut
- [U-Boot] Help: U-Boot on Nokia RX-51 (aka N900)
Pali Rohár
- [U-Boot] Help: U-Boot on Nokia RX-51 (aka N900)
Marek Vasut
- [U-Boot] Help: U-Boot on Nokia RX-51 (aka N900)
Wolfgang Denk
- [U-Boot] Help: U-Boot on Nokia RX-51 (aka N900)
Pali Rohár
- [U-Boot] Helpdesk update?
El Beheiry, Hossam
- [U-Boot] Hi: O Z K
ilana briskman
- [U-Boot] howw to configure the config file for AT91SAM9263-EK board
Padmalatha G
- [U-Boot] I am Mary Jones
Area Curricular En Medio Ambiente
- [U-Boot] I have Not Heard from You Please, Kindly (view Attached document) with this message and get back to me
Mrs. Susan Shabangu
- [U-Boot] I have Not Heard from You Please, Kindly (view Attached document) with this message and get back to me
Mrs. Susan Shabangu
- [U-Boot] I have Not Heard from You Please, Kindly (view Attached document) with this message and get back to me
Mrs. Susan Shabangu
- [U-Boot] I Intend to visit Malaysia
Aruna Gopinath
- [U-Boot] i82559#0: Tx error buffer not ready
Altunbas Sabri (DC-IA/EAH2)
- [U-Boot] IMPORTANT AND CONFIDENTIAL*(TREAT AS URGENT)
Mr.Nana Bokum
- [U-Boot] Including stdlib.h / ldiv_t
Simon Glass
- [U-Boot] Including stdlib.h / ldiv_t
Mike Frysinger
- [U-Boot] Including stdlib.h / ldiv_t
Simon Glass
- [U-Boot] Instruction WFI gives error at build time.
Sandeep Kumar
- [U-Boot] Instruction WFI gives error at build time.
Nick Thompson
- [U-Boot] Instruction WFI gives error at build time.
Aneesh V
- [U-Boot] Intialisation of Interrupts
Flash K
- [U-Boot] Intialisation of Interrupts
Graeme Russ
- [U-Boot] Is it necessary that uboot(mips) should read status register($12) before setting it
Detlev Zundel
- [U-Boot] Is it necessary that uboot(mips) should read status register($12) before setting it
Marek Vasut
- [U-Boot] Is it necessary that uboot(mips) should read status register($12) before setting it
RdrouterUboot Router
- [U-Boot] Job Opportunities
Chevron
- [U-Boot] Legal Privacy Policy.
Mrs Estel Hery Bedie
- [U-Boot] Loan Offer!
Mark Wright Loan Firm
- [U-Boot] Mailbox
update ---draw
- [U-Boot] Mailbox
NOTICE!!!
- [U-Boot] Mailbox
MRS CLARA
- [U-Boot] Microblaze/Xilinx drivers changes
Michal Simek
- [U-Boot] Microblaze/Xilinx drivers changes
Wolfgang Denk
- [U-Boot] Microblaze/Xilinx drivers changes
Michal Simek
- [U-Boot] Microblaze/Xilinx drivers changes
Marek Vasut
- [U-Boot] Microblaze/Xilinx drivers changes
Michal Simek
- [U-Boot] Microblaze/Xilinx drivers changes
Marek Vasut
- [U-Boot] Microblaze/Xilinx drivers changes
Wolfgang Denk
- [U-Boot] Microblaze/Xilinx drivers changes
Michal Simek
- [U-Boot] MISS PATRICIA JUSTIN AROP YAK
Patricia Justin
- [U-Boot] mkenvimage not working for me.
David Wagner
- [U-Boot] mkenvimage not working for me.
Nick Thomas
- [U-Boot] mkenvimage not working for me.
Mike Frysinger
- [U-Boot] mmc timeouts on omap3evm
Premi, Sanjeev
- [U-Boot] moje zdje;cie
Facebook
- [U-Boot] MPC512x FEC/MII
Schneider, Kolja
- [U-Boot] MPC512x FEC/MII
Bernhard Kaindl
- [U-Boot] MPC512x FEC/MII
Detlev Zundel
- [U-Boot] MPC512x FEC/MII
Schneider, Kolja
- [U-Boot] MPC512x FEC/MII
Detlev Zundel
- [U-Boot] MTCN Numbers: 6096147516
Garry Moore
- [U-Boot] mx31: Add board support for HALE TT-01
Helmut Raiger
- [U-Boot] mx31: Approach for WEIM CS accessors
Helmut Raiger
- [U-Boot] mx31: CONFIG_HARD_SPI irrelevant for i.MX31
Helmut Raiger
- [U-Boot] mx35pdk vs. mx35_3stack
Teemu Keskinarkaus
- [U-Boot] mx35pdk vs. mx35_3stack
Stefano Babic
- [U-Boot] mx35pdk vs. mx35_3stack
Teemu Keskinarkaus
- [U-Boot] mx35pdk vs. mx35_3stack
Stefano Babic
- [U-Boot] mx35pdk vs. mx35_3stack
Teemu Keskinarkaus
- [U-Boot] mx51+ide+problem
Georgy Obraztsov
- [U-Boot] mx51+ide+problem
Stefano Babic
- [U-Boot] mx51+ide+problem
Stefano Babic
- [U-Boot] mx51+ide+problem
Georgy Obraztsov
- [U-Boot] mx51+ide+problem
Georgy Obraztsov
- [U-Boot] mx51+ide+problem
Stefano Babic
- [U-Boot] mx51+ide+problem
Stefano Babic
- [U-Boot] mx51+ide+problem
Georgy Obraztsov
- [U-Boot] mx51+ide+problem
Stefano Babic
- [U-Boot] My dear friends,Thanks for your concern. W k z
Esteban Petracca
- [U-Boot] My Will
ms wendy jones
- [U-Boot] NAND flash filesystems broken
Aaron Williams
- [U-Boot] new image for Freescale MPC8313
David Pauli
- [U-Boot] new image for Freescale MPC8313
Scott Wood
- [U-Boot] NULL base_name for hwaddr env lookup
stany MARCEL
- [U-Boot] NULL base_name for hwaddr env lookup
Stany MARCEL
- [U-Boot] NULL base_name for hwaddr env lookup
Heiko Schocher
- [U-Boot] OMAP3 build (overo, beagle) fails but OMAP4 build (panda) succeeds
Alex Ray
- [U-Boot] OMAP3 build (overo, beagle) fails but OMAP4 build (panda) succeeds
Paulraj, Sandeep
- [U-Boot] omap3: gpio: build warnings and errors
Premi, Sanjeev
- [U-Boot] omap3: gpio: build warnings and errors
Paulraj, Sandeep
- [U-Boot] omap3_beagle problem booting kernel on latest u-boot
John Rigby
- [U-Boot] omap3_beagle problem booting kernel on latest u-boot
Aneesh V
- [U-Boot] omap3_beagle problem booting kernel on latest u-boot
John Rigby
- [U-Boot] omap3_beagle problem booting kernel on latest u-boot
Aneesh V
- [U-Boot] omap3_beagle: build broken - fix or remove board?
Wolfgang Denk
- [U-Boot] omap3_beagle: build broken - fix or remove board?
Paulraj, Sandeep
- [U-Boot] omap3_beagle: build broken - fix or remove board?
Albert ARIBAUD
- [U-Boot] omap: overo: Configure mux for gpio10
Steve Sakoman
- [U-Boot] omap: overo: Disable pull-ups on camera PCLK, HS and VS signals
Steve Sakoman
- [U-Boot] omap: overo: Use ubifs instead of jffs2 for nand
Steve Sakoman
- [U-Boot] omap: overo: Use ubifs instead of jffs2 for nand
Ash Charles
- [U-Boot] ORIGEN: fix needed for out-of-tree build
Wolfgang Denk
- [U-Boot] ORIGEN: fix needed for out-of-tree build
Chander Kashyap
- [U-Boot] ORIGEN: fix needed for out-of-tree build
Wolfgang Denk
- [U-Boot] ORIGEN: fix needed for out-of-tree build
Chander Kashyap
- [U-Boot] Orphanage Home
Mr, Moss Kanga
- [U-Boot] P4080 target with more than 1 dimm on each ddr3 controller?
Robert Sciuk
- [U-Boot] P4080 target with more than 1 dimm on each ddr3 controller?
York Sun
- [U-Boot] Patches to fix more ARM boards
Wolfgang Denk
- [U-Boot] Patches to fix more ARM boards
Albert ARIBAUD
- [U-Boot] Patches to fix more ARM boards
stefano babic
- [U-Boot] Please My Dear I Need Your Help.
mary kipkalya
- [U-Boot] Please pull u-boot-imx/next into arm/next
Stefano Babic
- [U-Boot] Please pull u-boot-imx/next into arm/next
Albert ARIBAUD
- [U-Boot] Please pull u-boot-mmc.git
Andy Fleming
- [U-Boot] Please pull u-boot-mmc.git
Wolfgang Denk
- [U-Boot] Please pull u-boot-mpc85xx
Kumar Gala
- [U-Boot] Please pull u-boot-mpc85xx
Wolfgang Denk
- [U-Boot] Please pull u-boot-ppc4xx/master
Stefan Roese
- [U-Boot] Please pull u-boot-ppc4xx/master
Wolfgang Denk
- [U-Boot] please pull u-boot-samsung/master
Minkyu Kang
- [U-Boot] please pull u-boot-samsung/master
Albert ARIBAUD
- [U-Boot] Please pull u-boot-ti/master
s-paulraj at ti.com
- [U-Boot] Please pull u-boot-ti/master
s-paulraj at ti.com
- [U-Boot] Please pull u-boot-ti/master
Albert ARIBAUD
- [U-Boot] Please pull u-boot-ti/master
Albert ARIBAUD
- [U-Boot] Please pull u-boot-ti/master
Paulraj, Sandeep
- [U-Boot] Please pull u-boot-ti/master
Albert ARIBAUD
- [U-Boot] Please pull u-boot-ti/master
s-paulraj at ti.com
- [U-Boot] Please pull u-boot-ti/master
Albert ARIBAUD
- [U-Boot] Please pull u-boot-ti/master
Albert ARIBAUD
- [U-Boot] Please pull u-boot-ti/master
Albert ARIBAUD
- [U-Boot] Please pull u-boot-ti/master
Paulraj, Sandeep
- [U-Boot] Please pull u-boot-ti/master -- breaks a lot of builds
Albert ARIBAUD
- [U-Boot] Please pull u-boot-ti/master -- breaks a lot of builds
Jason Kridner
- [U-Boot] Please pull u-boot-ti/master -- breaks a lot of builds
Albert ARIBAUD
- [U-Boot] Please pull u-boot-ti/master Update
s-paulraj at ti.com
- [U-Boot] Please pull u-boot-ti/master Update
Albert ARIBAUD
- [U-Boot] Please pull u-boot-ti/next
s-paulraj at ti.com
- [U-Boot] Please pull u-boot-ti/next
Albert ARIBAUD
- [U-Boot] Please pull u-boot-ti/next
Wolfgang Denk
- [U-Boot] Please pull u-boot-ti/next
Albert ARIBAUD
- [U-Boot] Please pull u-boot-ti/next
Paulraj, Sandeep
- [U-Boot] Please pull u-boot-ti/next
Albert ARIBAUD
- [U-Boot] Please pull u-boot-ti/next into arm/next
s-paulraj at ti.com
- [U-Boot] Please pull u-boot-ti/next into arm/next
Albert ARIBAUD
- [U-Boot] Please pull u-boot-ti/next into arm/next
Paulraj, Sandeep
- [U-Boot] Please rescue my life out of this critical situation.
Akram Haider
- [U-Boot] Portale Italia
Luciano_Italia
- [U-Boot] Problems when copying data from flash to ram
philipp zaugg
- [U-Boot] Problems when copying data from flash to ram
Marek Vasut
- [U-Boot] Problems when copying data from flash to ram
elhobit
- [U-Boot] Problems with all boot-possibilties
David Pauli
- [U-Boot] Problems with all boot-possibilties
Andy Pont
- [U-Boot] Problems with all boot-possibilties
Scott Wood
- [U-Boot] Pull request - microblaze
Michal Simek
- [U-Boot] Pull request - microblaze
Wolfgang Denk
- [U-Boot] Pull request u-boot-blackfin.git (post branch)
Mike Frysinger
- [U-Boot] Pull request u-boot-blackfin.git (sf branch)
Mike Frysinger
- [U-Boot] Pull request u-boot-marvell.git
Prafulla Wadaskar
- [U-Boot] Pull request u-boot-marvell.git
Albert ARIBAUD
- [U-Boot] Pull request u-boot-marvell.git
Prafulla Wadaskar
- [U-Boot] Pull request u-boot-marvell.git
Albert ARIBAUD
- [U-Boot] Pull request: u-boot-arm/master
Aneesh V
- [U-Boot] Pull request: u-boot-arm/master
Albert ARIBAUD
- [U-Boot] Pull request: u-boot-arm/master
Aneesh V
- [U-Boot] Pull request: u-boot-arm/master
Albert ARIBAUD
- [U-Boot] Pull request: u-boot-arm/master
Aneesh V
- [U-Boot] Pull request: u-boot-arm/master
Albert ARIBAUD
- [U-Boot] Pull request: u-boot-arm/master
Aneesh V
- [U-Boot] Pull request: u-boot-arm/master
Albert ARIBAUD
- [U-Boot] Pull request: u-boot-arm/master
Wolfgang Denk
- [U-Boot] Pull request: u-boot-arm/master
Albert ARIBAUD
- [U-Boot] Pull request: u-boot-arm/master
Wolfgang Denk
- [U-Boot] Pull request: u-boot-arm/master
Albert ARIBAUD
- [U-Boot] Pull request: u-boot-arm/master
Wolfgang Denk
- [U-Boot] Pull request: u-boot-arm/master
Albert ARIBAUD
- [U-Boot] Pull request: u-boot-arm/master - updated x2
Albert ARIBAUD
- [U-Boot] Pull request: u-boot-arm/master - updated x2 - please hold, again
Albert ARIBAUD
- [U-Boot] Pull request: u-boot-arm/master - updated x3
Albert ARIBAUD
- [U-Boot] Pull request: u-boot-arm/master - updated x3
Wolfgang Denk
- [U-Boot] Pull request: u-boot-arm/master -- please hold
Albert ARIBAUD
- [U-Boot] Pull request: u-boot-arm/master -- please hold
Marek Vasut
- [U-Boot] Pull request: u-boot-arm/master -- please hold
Albert ARIBAUD
- [U-Boot] Pull request: u-boot-arm/master -- please hold
Marek Vasut
- [U-Boot] Pull request: u-boot-arm/master -- updated
Albert ARIBAUD
- [U-Boot] Pull request: u-boot-arm/master -- updated -- please hold (again, yes, sorry)
Albert ARIBAUD
- [U-Boot] Pull request: u-boot-coldfire/master
Jin Zhengxiong-R64188
- [U-Boot] Pull request: u-boot-coldfire/master
Wolfgang Denk
- [U-Boot] Pull request: u-boot-usb
Remy Bohmer
- [U-Boot] Pull request: u-boot-usb
Wolfgang Denk
- [U-Boot] Pull request: u-boot-video/master
Anatolij Gustschin
- [U-Boot] Pull request: u-boot-video/master
Wolfgang Denk
- [U-Boot] Question: Information regarding MII and PHY
Graeme Russ
- [U-Boot] Question: Information regarding MII and PHY
Graeme Russ
- [U-Boot] Question: Information regarding MII and PHY
Mike Frysinger
- [U-Boot] Question: Information regarding MII and PHY
Graeme Russ
- [U-Boot] Question: Information regarding MII and PHY
Graeme Russ
- [U-Boot] Question: Information regarding MII and PHY
Andy Fleming
- [U-Boot] Question: Information regarding MII and PHY
Andy Fleming
- [U-Boot] Question: Information regarding MII and PHY
Graeme Russ
- [U-Boot] Question: Information regarding MII and PHY
Mike Frysinger
- [U-Boot] Question: Information regarding MII and PHY
Andy Fleming
- [U-Boot] RE
joseconsole at iplanmail.com.ar
- [U-Boot] Regarding Start.S file
Asmit Patel
- [U-Boot] Regarding Start.S file
Asmit Patel
- [U-Boot] Regarding Start.S file
Albert ARIBAUD
- [U-Boot] Regarding Start.S file
Marek Vasut
- [U-Boot] Regd U-Boot Architecture
Mayur Aggarwal
- [U-Boot] Regd U-Boot Architecture
Detlev Zundel
- [U-Boot] Request For Your Partnership in Investment
Info
- [U-Boot] RESOLUTION TO YOUR STALLED PAYMENT
proff.musagellayakubu001 at dom.pl
- [U-Boot] SALES PROMO : BRAND NEW APPLE IPHONES 4G/IPAD2/MACBOOK AIR
JOHN ABBOTT TRADING UK
- [U-Boot] serial ifdef mess
Mike Frysinger
- [U-Boot] serial ifdef mess
Graeme Russ
- [U-Boot] serial ifdef mess
Mike Frysinger
- [U-Boot] serial ifdef mess
Graeme Russ
- [U-Boot] serial ifdef mess
Simon Glass
- [U-Boot] serial ifdef mess
Mike Frysinger
- [U-Boot] serial ifdef mess
Mike Frysinger
- [U-Boot] serial ifdef mess
Graeme Russ
- [U-Boot] serial ifdef mess
Wolfgang Denk
- [U-Boot] Setting CONFIG_SYS_TEXT_BASE when CONFIG_NAND_SPL is selected
Fabio Estevam
- [U-Boot] Setting CONFIG_SYS_TEXT_BASE when CONFIG_NAND_SPL is selected
Stefano Babic
- [U-Boot] Setting CONFIG_SYS_TEXT_BASE when CONFIG_NAND_SPL is selected
Scott Wood
- [U-Boot] smc911x not functional on top of tree
Fabio Estevam
- [U-Boot] smc911x not functional on top of tree
stefano babic
- [U-Boot] smc911x not functional on top of tree
Marek Vasut
- [U-Boot] smc911x not functional on top of tree
Fabio Estevam
- [U-Boot] smc911x not functional on top of tree
Stefano Babic
- [U-Boot] smc911x not functional on top of tree
Helmut Raiger
- [U-Boot] smc911x not functional on top of tree
Stefano Babic
- [U-Boot] smc911x not functional on top of tree
Helmut Raiger
- [U-Boot] smc911x not functional on top of tree
Peter Korsgaard
- [U-Boot] smc911x not functional on top of tree
Helmut Raiger
- [U-Boot] SMDK6400 regression
Simon Schwarz
- [U-Boot] SMDK6400 regression
Simon Schwarz
- [U-Boot] SMDK6400 regression
Scott Wood
- [U-Boot] SMDK6400 regression (was: Please pull u-boot-ti/next)
Albert ARIBAUD
- [U-Boot] smdkv310: fix needed for out-of-tree build
Wolfgang Denk
- [U-Boot] some USB cleanup on EfikaMX
Jana Rapava
- [U-Boot] some USB cleanup on EfikaMX
Wolfgang Denk
- [U-Boot] some USB cleanup on EfikaMX
Stefano Babic
- [U-Boot] spam scam?
arminda
- [U-Boot] SPL boot modes
Joel A Fernandes
- [U-Boot] SPL boot modes
Joel A Fernandes
- [U-Boot] SPL boot modes
Simon Schwarz
- [U-Boot] SPL boot modes
Wolfgang Denk
- [U-Boot] SPL boot modes
Simon Schwarz
- [U-Boot] SPL boot modes
Tom Rini
- [U-Boot] SPL boot modes
Joel A Fernandes
- [U-Boot] Splitting u-boot into 2 stages
Kumar Nath, Chandan
- [U-Boot] Splitting u-boot into 2 stages
Graeme Russ
- [U-Boot] Splitting u-boot into 2 stages
Wolfgang Denk
- [U-Boot] start.S
maheen butt
- [U-Boot] start.S
Christopher Harvey
- [U-Boot] start.S
maheen butt
- [U-Boot] start.S
Marek Vasut
- [U-Boot] start.S
Manoj Kumar
- [U-Boot] start.S
maheen butt
- [U-Boot] start.S
Sandeep Kumar
- [U-Boot] Subscription to discussion announce
Discussion Administrator
- [U-Boot] The Brand Magazine London - we have been listening to you!
The Brand Magazine London
- [U-Boot] The command "nand write.yaffs" is not working correctly
Peter Pan
- [U-Boot] The command "nand write.yaffs" is not working correctly
Jin Zhengxiong-R64188
- [U-Boot] The command "nand write.yaffs" is not working correctly
Peter Pan
- [U-Boot] TR: u-boot SquashFS
Jean-Michel Hautbois
- [U-Boot] TR: u-boot SquashFS
Albert ARIBAUD
- [U-Boot] turning on -Werror?
Kumar Gala
- [U-Boot] u-boot and UBI
ed in 92626
- [U-Boot] u-boot and UBI
Detlev Zundel
- [U-Boot] U-Boot build break for m501sk board from Artila
Sandeep Kumar
- [U-Boot] U-Boot build break for m501sk board from Artila
Stefano Babic
- [U-Boot] U-Boot build break for m501sk board from Artila
Jamie
- [U-Boot] U-Boot build break for m501sk board from Artila
Wolfgang Denk
- [U-Boot] U-Boot build break for m501sk board from Artila
Jamie Risk
- [U-Boot] U-Boot build break for m501sk board from Artila
Jamie Risk
- [U-Boot] U-Boot for AMCC Sequoia Board (PPC440EPX) fails to boot for version 2009.11-rc1 onwards
Stefan Roese
- [U-Boot] U-Boot for AMCC Sequoia Board (PPC440EPX) fails to boot for version 2009.11-rc1 onwards
Stefan Roese
- [U-Boot] U-Boot for AMCC Sequoia Board (PPC440EPX) fails to boot for version 2009.11-rc1 onwards
Stefan Roese
- [U-Boot] U-Boot for AMCC Sequoia Board (PPC440EPX) fails to boot for version 2009.11-rc1 onwards
Hayes,Doug
- [U-Boot] U-Boot for AMCC Sequoia Board (PPC440EPX) fails to boot for version 2009.11-rc1 onwards
Hayes,Doug
- [U-Boot] U-Boot for AMCC Sequoia Board (PPC440EPX) fails to boot for version 2009.11-rc1 onwards
Hayes,Doug
- [U-Boot] U-Boot for AMCC Sequoia Board (PPC440EPX) fails to boot for version 2009.11-rc1 onwards
Hayes,Doug
- [U-Boot] U-Boot hanging for devkit8000 by TIMLL
bhimsen.kulkarni at wipro.com
- [U-Boot] U-boot mainline test report on BeagleBoard
Joel A Fernandes
- [U-Boot] U-boot mainline test report on BeagleBoard
Tom Rini
- [U-Boot] U-boot mainline test report on BeagleBoard
Simon Glass
- [U-Boot] u-boot s3c2416
tommy.hong
- [U-Boot] u-boot s3c2416
tommy.hong
- [U-Boot] U-Boot with gcov / gprof?
Simon Glass
- [U-Boot] U-Boot with gcov / gprof?
Andrew Murray
- [U-Boot] U-Boot X86 bootstart
Ondra Kupka
- [U-Boot] U-Boot X86 bootstart
Marek Vasut
- [U-Boot] U-Boot X86 bootstart
Graeme Russ
- [U-Boot] u-boot-1.3.3 SMC91111 driver
Chaney Lee
- [U-Boot] u-boot-1.3.3 SMC91111 driver
Simon Schwarz
- [U-Boot] u-boot-1.3.3 SMC91111 driver
Marek Vasut
- [U-Boot] U-Boot: using nand write to flash an ubi image, ubi part fails
Aaron Williams
- [U-Boot] U-Boot: using nand write to flash an ubi image, ubi part fails
Matthew L. Creech
- [U-Boot] U-Boot: using nand write to flash an ubi image, ubi part fails
Lars Michael
- [U-Boot] U-Boot: using nand write to flash an ubi image, ubi part fails
Lars Michael
- [U-Boot] U-Boot: using nand write to flash an ubi image, ubi part fails
Aaron Williams
- [U-Boot] UBI problems on current u-bo
Holger Brunck
- [U-Boot] UBI problems on current u-bo
Stefan Roese
- [U-Boot] UBI problems on current u-bo
Holger Brunck
- [U-Boot] UBI problems on current u-boot
Holger Brunck
- [U-Boot] UBI problems on current u-boot
Holger Brunck
- [U-Boot] UBI problems on current u-boot
Stefan Roese
- [U-Boot] UBI problems on current u-boot
Holger Brunck
- [U-Boot] UBI problems on current u-boot
Stefan Roese
- [U-Boot] UBI problems on current u-boot
Holger Brunck
- [U-Boot] UBI problems on current u-boot
Holger Brunck
- [U-Boot] ubifs: memory possibly not freed
Renaud Barbier
- [U-Boot] Uboot for Mips
fayazvf
- [U-Boot] ucdragon.com
Alex
- [U-Boot] ucdragon.com
Alex
- [U-Boot] ucdragon.com
Alex
- [U-Boot] ucdragon.com
Alex
- [U-Boot] Une tu Webmail Caja ha superado su cuota
WEBMAIL TEAM
- [U-Boot] Unpaid Beneficiary $20.million is ready to be paid..
Compensation Officer
- [U-Boot] Version 2 of 'Moving mx3fb to CONFIG_VIDEO'
Helmut Raiger
- [U-Boot] VIEW THE ATTACHMENT AND CONTACT ME +447564008940
JAMES GRENFELL
- [U-Boot] WARNING
webmaster desk
- [U-Boot] Warning
Albert ARIBAUD
- [U-Boot] Warning
Premi, Sanjeev
- [U-Boot] Warning
Premi, Sanjeev
- [U-Boot] Warning
Premi, Sanjeev
- [U-Boot] Warning
Wolfgang Denk
- [U-Boot] Watchdog on LPC 3250
Phakathorn Asawathpmetha
- [U-Boot] Watchdog on LPC 3250
Wolfgang Denk
- [U-Boot] Watchdog on LPC 3250
Wolfgang Denk
- [U-Boot] We offer the following kinds of loans and many more;
Loan Offer. At 3% Rate!!!
- [U-Boot] Western Union Compensation
Western Union Money Transfer
- [U-Boot] Western Union Compensation
Western Union Transfer
- [U-Boot] Win $500,000 in Coca Cola Company
Mrs Kelly Tom.
- [U-Boot] WINNING NOTIFICATIONS;Ref File NO.: NK23BL-UK34-2011
8sc68 at queensu.ca
- [U-Boot] World's Easiest Program, paying everybody daily
thomas peters
- [U-Boot] YAFFS2 and MTD partitions
Aaron Williams
- [U-Boot] Your Email Account
SPDCUK
- Your Email I.D Has Won £1,350,000 GBP.!!
Mrs Monica Dickson.
- [U-Boot] Your Email ID Has Won
MICROWORD CORPORATION®GATEWAY INTERNET PROMOTIONS.
- [U-Boot] Your Inheritance/Winning payment from United Nations..
UN-Western Union Claims.
- [U-Boot] Your mailbox has exceeded the set storage limit
Webmail Notification
- [U-Boot] Your mailbox has exceeded the set storage limit
Webmail Notification
- [U-Boot] Your mailbox is full.
Marino, Doris M.
- [U-Boot] Your New Friend Rama.
Miss Rama Djirama
- [U-Boot] Your refference
Details
- [U-Boot] YOUR WINNING DRAW NO. 1639
BBC LOTTERY AWARD
Last message date:
Fri Sep 30 23:52:49 CEST 2011
Archived on: Fri Sep 30 23:53:00 CEST 2011
This archive was generated by
Pipermail 0.09 (Mailman edition).