[U-Boot] Setting CONFIG_SYS_TEXT_BASE when CONFIG_NAND_SPL is selected
Fabio Estevam
festevam at gmail.com
Mon Sep 5 21:02:40 CEST 2011
Hi,
On a MX31PDK the only boot media is NAND flash, so I was trying to get
rid of the
conditional setting of CONFIG_SYS_TEXT_BASE.
CONFIG_NAND_SPL is set in nand_spl/board/freescale/mx31pdk/Makefile.
,so I tried the following:
diff --git a/board/freescale/mx31pdk/config.mk b/board/freescale/mx31pdk/config.
index de2c642..b9932ec 100644
--- a/board/freescale/mx31pdk/config.mk
+++ b/board/freescale/mx31pdk/config.mk
@@ -1,5 +1,2 @@
-ifdef CONFIG_NAND_SPL
CONFIG_SYS_TEXT_BASE = 0x87ec0000
-else
-CONFIG_SYS_TEXT_BASE = 0x87f00000
-endif
+
,but this causes the board not to boot.
Does anyone have any ideas as to why the patch above does not work?
Thanks,
Fabio Estevam
More information about the U-Boot
mailing list