[U-Boot] [PATCH v2] serial: uartlite: Support for SERIAL_MULTI

[Michal Simek]

Michal Simek wrote:
> Add support for SERIAL MULTI for uartlite.
> 
> Signed-off-by: Michal Simek <monstr at monstr.eu>
> 
> ---
> v2: Use in/out_be32 functions
> ---
>  common/serial.c                   |   14 ++++
>  drivers/serial/serial_xuartlite.c |  137 ++++++++++++++++++++++++++++++++-----
>  include/serial.h                  |    7 ++
>  3 files changed, 140 insertions(+), 18 deletions(-)
> 
> diff --git a/common/serial.c b/common/serial.c
> index 995d268..df02fa5 100644
> --- a/common/serial.c
> +++ b/common/serial.c
> @@ -108,6 +108,20 @@ void serial_initialize (void)
>  #if defined(CONFIG_SYS_BFIN_UART)
>  	serial_register_bfin_uart();
>  #endif
> +#if defined(CONFIG_XILINX_UARTLITE)
> +# ifdef XILINX_UARTLITE_BASEADDR
> +	serial_register(&uartlite_serial0_device);
> +# endif /* XILINX_UARTLITE_BASEADDR */
> +# ifdef XILINX_UARTLITE_BASEADDR1
> +	serial_register(&uartlite_serial1_device);
> +# endif /* XILINX_UARTLITE_BASEADDR1 */
> +# ifdef XILINX_UARTLITE_BASEADDR2
> +	serial_register(&uartlite_serial2_device);
> +# endif /* XILINX_UARTLITE_BASEADDR2 */
> +# ifdef XILINX_UARTLITE_BASEADDR3
> +	serial_register(&uartlite_serial3_device);
> +# endif /* XILINX_UARTLITE_BASEADDR3 */
> +#endif /* CONFIG_XILINX_UARTLITE */
>  	serial_assign (default_serial_console ()->name);
>  }
>  
> diff --git a/drivers/serial/serial_xuartlite.c b/drivers/serial/serial_xuartlite.c
> index 00d0eaa..948d952 100644
> --- a/drivers/serial/serial_xuartlite.c
> +++ b/drivers/serial/serial_xuartlite.c
> @@ -25,20 +25,75 @@
>   */
>  
>  #include <config.h>
> +#include <common.h>
>  #include <asm/io.h>
> -
> -#define RX_FIFO_OFFSET		0 /* receive FIFO, read only */
> -#define TX_FIFO_OFFSET		4 /* transmit FIFO, write only */
> -#define STATUS_REG_OFFSET	8 /* status register, read only */
> +#include <linux/compiler.h>
> +#include <serial.h>
>  
>  #define SR_TX_FIFO_FULL		0x08 /* transmit FIFO full */
>  #define SR_RX_FIFO_VALID_DATA	0x01 /* data in receive FIFO */
>  #define SR_RX_FIFO_FULL		0x02 /* receive FIFO full */
>  
> -#define UARTLITE_STATUS		(CONFIG_SERIAL_BASE + STATUS_REG_OFFSET)
> -#define UARTLITE_TX_FIFO	(CONFIG_SERIAL_BASE + TX_FIFO_OFFSET)
> -#define UARTLITE_RX_FIFO	(CONFIG_SERIAL_BASE + RX_FIFO_OFFSET)
> +struct uartlite {
> +	u32 rx_fifo;
> +	u32 tx_fifo;
> +	u32 status;
> +};
> +
> +static struct uartlite *userial_ports[4] = {
> +#ifdef XILINX_UARTLITE_BASEADDR
> +	(struct uartlite *)XILINX_UARTLITE_BASEADDR,
> +#else
> +	NULL,
> +#endif
> +#ifdef XILINX_UARTLITE_BASEADDR1
> +	(struct uartlite *)XILINX_UARTLITE_BASEADDR1,
> +#else
> +	NULL,
> +#endif
> +#ifdef XILINX_UARTLITE_BASEADDR2
> +	(struct uartlite *)XILINX_UARTLITE_BASEADDR2,
> +#else
> +	NULL,
> +#endif
> +#ifdef XILINX_UARTLITE_BASEADDR3
> +	(struct uartlite *)XILINX_UARTLITE_BASEADDR3
> +#else
> +	NULL
> +#endif
> +};
> +
> +void uartlite_serial_putc(const char c, const int port)
> +{
> +	struct uartlite *regs = userial_ports[port];
> +	if (c == '\n')
> +		uartlite_serial_putc('\r', port);
> +	while (in_be32(&regs->status) & SR_TX_FIFO_FULL)
> +		;
> +	out_be32(&regs->tx_fifo, c & 0xff);
> +}
> +
> +void uartlite_serial_puts(const char * s, const int port)
> +{
> +	while (*s)
> +		uartlite_serial_putc(*s++, port);
> +}
> +
> +int uartlite_serial_getc(const int port)
> +{
> +	struct uartlite *regs = userial_ports[port];
> +	while (!(in_be32(&regs->status) & SR_RX_FIFO_VALID_DATA))
> +		;
> +	return in_be32(&regs->rx_fifo) & 0xff;
> +}
> +
> +int uartlite_serial_tstc(const int port)
> +{
> +	struct uartlite *regs = userial_ports[port];
> +	return in_be32(&regs->status) & SR_RX_FIFO_VALID_DATA;
> +}
>  
> +#if !defined(CONFIG_SERIAL_MULTI)
>  int serial_init(void)
>  {
>  	/* FIXME: Nothing for now. We should initialize fifo, etc */
> @@ -52,26 +107,72 @@ void serial_setbrg(void)
>  
>  void serial_putc(const char c)
>  {
> -	if (c == '\n')
> -		serial_putc('\r');
> -	while (in_be32((u32 *) UARTLITE_STATUS) & SR_TX_FIFO_FULL);
> -	out_be32((u32 *) UARTLITE_TX_FIFO, (unsigned char) (c & 0xff));
> +	uartlite_serial_putc(c, 0);
>  }
>  
> -void serial_puts(const char * s)
> +void serial_puts(const char *s)
>  {
> -	while (*s) {
> -		serial_putc(*s++);
> -	}
> +	uartlite_serial_puts(s, 0);
>  }
>  
>  int serial_getc(void)
>  {
> -	while (!(in_be32((u32 *) UARTLITE_STATUS) & SR_RX_FIFO_VALID_DATA));
> -	return in_be32((u32 *) UARTLITE_RX_FIFO) & 0xff;
> +	return uartlite_serial_getc(0);
>  }
>  
>  int serial_tstc(void)
>  {
> -	return (in_be32((u32 *) UARTLITE_STATUS) & SR_RX_FIFO_VALID_DATA);
> +	return uartlite_serial_tstc(0);
> +}
> +#endif
> +
> +#if defined(CONFIG_SERIAL_MULTI)
> +/* Multi serial device functions */
> +#define DECLARE_ESERIAL_FUNCTIONS(port) \
> +    int  userial##port##_init (void) {return(0);}\
> +    void userial##port##_setbrg (void) {}\
> +    int  userial##port##_getc (void) {return uartlite_serial_getc(port);}\
> +    int  userial##port##_tstc (void) {return uartlite_serial_tstc(port);}\
> +    void userial##port##_putc (const char c) {uartlite_serial_putc(c, port);}\
> +    void userial##port##_puts (const char *s) {uartlite_serial_puts(s, port);}
> +
> +/* Serial device descriptor */
> +#define INIT_ESERIAL_STRUCTURE(port,name) {\
> +	name,\
> +	userial##port##_init,\
> +	NULL,\
> +	userial##port##_setbrg,\
> +	userial##port##_getc,\
> +	userial##port##_tstc,\
> +	userial##port##_putc,\
> +	userial##port##_puts, }
> +
> +DECLARE_ESERIAL_FUNCTIONS(0);
> +struct serial_device uartlite_serial0_device =
> +	INIT_ESERIAL_STRUCTURE(0,"ttyUL0");
> +DECLARE_ESERIAL_FUNCTIONS(1);
> +struct serial_device uartlite_serial1_device =
> +	INIT_ESERIAL_STRUCTURE(1,"ttyUL1");
> +DECLARE_ESERIAL_FUNCTIONS(2);
> +struct serial_device uartlite_serial2_device =
> +	INIT_ESERIAL_STRUCTURE(2,"ttyUL2");
> +DECLARE_ESERIAL_FUNCTIONS(3);
> +struct serial_device uartlite_serial3_device =
> +	INIT_ESERIAL_STRUCTURE(3,"ttyUL3");

Here are some coding style violations. It is fixed in the next version.

Michal

-- 
Michal Simek, Ing. (M.Eng)
w: www.monstr.eu p: +42-0-721842854
Maintainer of Linux kernel 2.6 Microblaze Linux - http://www.monstr.eu/fdt/
Microblaze U-BOOT custodian