[U-Boot] Pull request: u-boot-arm/master
Wolfgang Denk
wd at denx.de
Thu Sep 15 14:24:30 CEST 2011
Dear Albert ARIBAUD,
In message <4E705073.1090106 at aribaud.net> you wrote:
> Hi Wolfgang,
>
> The following changes since commit 6ceb0135f96d73063ffbaab5be7ce23933367388:
>
> Prepare v2011.09 (2011-09-11 21:31:04 +0200)
>
> are available in the git repository at:
> git://git.denx.de/u-boot-arm.git master
>
> Aneesh V (4):
> omap4: factor out common part from board config headers
> omap4: make SDRAM init work for ES1.0 silicon
> omap4: IO settings
> omap4: fix pad configuration settings for SDP and Panda
>
> Fabio Estevam (2):
> MX25: tx25: Fix build by making use of GPIO framework
> MX25: tx25: Cleanup tx25.h config
>
> Howard D. Gray (1):
> ARMV7: OMAP3: Add 37xx ESx revision numbers.
>
> Jason Kridner (1):
> led: remove camel casing of led identifiers globally
>
> Joel A Fernandes (1):
> OMAP: Add function to get state of a GPIO output
>
> Michael Jones (2):
> ARMV7: OMAP: Write more than 1 byte at a time in i2c_write
> ARMV7: OMAP: I2C driver: cosmetic: make checkpatch-compatible
>
> Nagabhushana Netagunte (3):
> da830: modify the U-Boot prompt string
> da830: enable SPI flash boot mode
> da830: modify the MEMTEST start and end address
>
> Sandeep Paulraj (2):
> OMAP3 Beagle: Minor config cleanup
> DA830: Fix Build Warning
>
> Sanjeev Premi (4):
> omap3: beagle: Fix build warning
> omap: gpio: Use generic API
> omap: gpio: generic changes after changing API
> omap: gpio: Adapt board files to use generic API
>
> arch/arm/cpu/arm1176/start.S | 2 +-
> arch/arm/cpu/arm720t/start.S | 2 +-
> arch/arm/cpu/arm920t/ep93xx/led.c | 24 ++--
> arch/arm/cpu/arm920t/ep93xx/lowlevel_init.S | 10 +-
> arch/arm/cpu/arm920t/start.S | 2 +-
> arch/arm/cpu/arm925t/start.S | 2 +-
> arch/arm/cpu/arm926ejs/at91/led.c | 12 +-
> arch/arm/cpu/arm926ejs/start.S | 2 +-
> arch/arm/cpu/arm_intcm/start.S | 2 +-
> arch/arm/cpu/armv7/omap-common/gpio.c | 105 +++++++++--
> arch/arm/cpu/armv7/omap3/sys_info.c | 13 ++-
> arch/arm/cpu/armv7/omap4/board.c | 62 ++++++
> arch/arm/cpu/armv7/omap4/clocks.c | 5 +-
> arch/arm/cpu/armv7/omap4/emif.c | 72 +------
> arch/arm/cpu/armv7/omap4/sdram_elpida.c | 24 ++--
> arch/arm/cpu/ixp/start.S | 2 +-
> arch/arm/cpu/s3c44b0/start.S | 2 +-
> arch/arm/include/asm/arch-omap3/omap3.h | 10 +
> arch/arm/include/asm/arch-omap4/emif.h | 23 +--
> arch/arm/include/asm/arch-omap4/omap4.h | 45 ++++-
> arch/arm/include/asm/omap_gpio.h | 13 --
> arch/arm/lib/board.c | 32 ++--
> board/atmel/at91rm9200ek/led.c | 12 +-
> board/cm_t35/leds.c | 10 +-
> board/comelit/dig297/dig297.c | 12 +-
> board/eukrea/cpu9260/led.c | 48 +++---
> board/isee/igep0020/igep0020.c | 12 +-
> board/karo/tx25/tx25.c | 1 +
> board/logicpd/zoom2/debug_board.c | 10 +-
> board/logicpd/zoom2/led.c | 66 ++++----
> board/logicpd/zoom2/zoom2.c | 10 +-
> board/overo/overo.c | 54 +++---
> board/ti/beagle/beagle.c | 44 ++--
> board/ti/beagle/led.c | 26 ++--
> board/ti/evm/evm.c | 12 +-
> board/ti/panda/panda_mux_data.h | 41 ++--
> board/ti/sdp4430/sdp4430_mux_data.h | 9 +-
> common/cmd_led.c | 8 +-
> doc/README.omap3 | 20 +-
> drivers/i2c/omap24xx_i2c.c | 241
> +++++++++++-------------
> include/configs/da830evm.h | 18 +-
> include/configs/omap3_beagle.h | 3 +-
> include/configs/omap4_common.h | 275
> +++++++++++++++++++++++++++
> include/configs/omap4_panda.h | 244
> +-----------------------
> include/configs/omap4_sdp4430.h | 245
> +-----------------------
> include/configs/tx25.h | 16 +-
> include/status_led.h | 32 ++--
> 47 files changed, 916 insertions(+), 1019 deletions(-)
> create mode 100644 include/configs/omap4_common.h
Applied, thanks.
Best regards,
Wolfgang Denk
--
DENX Software Engineering GmbH, MD: Wolfgang Denk & Detlev Zundel
HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany
Phone: (+49)-8142-66989-10 Fax: (+49)-8142-66989-80 Email: wd at denx.de
If you think the problem is bad now, just wait until we've solved it.
Epstein's Law
More information about the U-Boot
mailing list