[U-Boot] [PATCH 8/9] powerpc/mpc8548cds: Fix config according to system address map

Zhao Chenhui chenhui.zhao at freescale.com
Tue Sep 13 09:15:30 CEST 2011


From: chenhui zhao <chenhui.zhao at freescale.com>

- Fix config according to system address map in the manual.
- Rework tlb and law tables.
- Remove unnecessary macros.

Signed-off-by: Zhao Chenhui <chenhui.zhao at freescale.com>
---
 board/freescale/mpc8548cds/law.c        |   19 +++++----
 board/freescale/mpc8548cds/mpc8548cds.c |    8 ++--
 board/freescale/mpc8548cds/tlb.c        |   67 ++++++++++++++++---------------
 include/configs/MPC8548CDS.h            |   56 ++++++++++++-------------
 4 files changed, 76 insertions(+), 74 deletions(-)

diff --git a/board/freescale/mpc8548cds/law.c b/board/freescale/mpc8548cds/law.c
index 5b6943d..f0de509 100644
--- a/board/freescale/mpc8548cds/law.c
+++ b/board/freescale/mpc8548cds/law.c
@@ -31,13 +31,14 @@
  * LAW(Local Access Window) configuration:
  *
  * 0x0000_0000     0x7fff_ffff     DDR                     2G
- * 0x8000_0000     0x9fff_ffff     PCI1 MEM                512M
+ * 0x8000_0000     0x8fff_ffff     PCI1 MEM                256M
+ * 0x9000_0000     0x9fff_ffff     PCI2 MEM                256M
  * 0xa000_0000     0xbfff_ffff     PCIe MEM                512M
  * 0xc000_0000     0xdfff_ffff     RapidIO                 512M
- * 0xe000_0000     0xe000_ffff     CCSR                    1M
- * 0xe200_0000     0xe10f_ffff     PCI1 IO                 1M
- * 0xe280_0000     0xe20f_ffff     PCI2 IO                 1M
- * 0xe300_0000     0xe30f_ffff     PCIe IO                 1M
+ * 0xe000_0000     0xe00f_ffff     CCSR                    1M
+ * 0xe200_0000     0xe27f_ffff     PCI1 IO                 8M
+ * 0xe280_0000     0xe2ff_ffff     PCI2 IO                 8M
+ * 0xe300_0000     0xe3ff_ffff     PCIe IO                 16M
  * 0xf000_0000     0xf3ff_ffff     SDRAM                   64M
  * 0xf800_0000     0xf80f_ffff     NVRAM/CADMUS (*)        1M
  * 0xff00_0000     0xff7f_ffff     FLASH (2nd bank)        8M
@@ -52,11 +53,11 @@
 
 struct law_entry law_table[] = {
 #ifdef CONFIG_SYS_PCI2_MEM_PHYS
-	SET_LAW(CONFIG_SYS_PCI2_MEM_PHYS, LAW_SIZE_512M, LAW_TRGT_IF_PCI_2),
-	SET_LAW(CONFIG_SYS_PCI2_IO_PHYS, LAW_SIZE_1M, LAW_TRGT_IF_PCI_2),
+	SET_LAW(CONFIG_SYS_PCI2_MEM_PHYS, LAW_SIZE_256M, LAW_TRGT_IF_PCI_2),
+	SET_LAW(CONFIG_SYS_PCI2_IO_PHYS, LAW_SIZE_8M, LAW_TRGT_IF_PCI_2),
 #endif
-	/* LBC window - maps 256M 0xf0000000 -> 0xffffffff */
-	SET_LAW(CONFIG_SYS_LBC_SDRAM_BASE, LAW_SIZE_256M, LAW_TRGT_IF_LBC),
+	/* LBC window - maps 256M */
+	SET_LAW(CONFIG_SYS_LBC_SDRAM_BASE_PHYS, LAW_SIZE_256M, LAW_TRGT_IF_LBC),
 };
 
 int num_law_entries = ARRAY_SIZE(law_table);
diff --git a/board/freescale/mpc8548cds/mpc8548cds.c b/board/freescale/mpc8548cds/mpc8548cds.c
index 99c86ac..65da881 100644
--- a/board/freescale/mpc8548cds/mpc8548cds.c
+++ b/board/freescale/mpc8548cds/mpc8548cds.c
@@ -53,10 +53,10 @@ int checkboard (void)
 
 	uint cpu_board_rev = get_cpu_board_revision ();
 
-	printf ("Board: CDS Version 0x%02x, PCI Slot %d\n",
-		get_board_version (), pci_slot);
-
-	printf ("CPU Board Revision %d.%d (0x%04x)\n",
+	puts("Board: MPC8548CDS");
+	printf(" Carrier Rev: 0x%02x, PCI Slot %d\n",
+			get_board_version(), pci_slot);
+	printf("       Daughtercard Rev: %d.%d (0x%04x)\n",
 		MPC85XX_CPU_BOARD_MAJOR (cpu_board_rev),
 		MPC85XX_CPU_BOARD_MINOR (cpu_board_rev), cpu_board_rev);
 	/*
diff --git a/board/freescale/mpc8548cds/tlb.c b/board/freescale/mpc8548cds/tlb.c
index b2c1b31..032d0e1 100644
--- a/board/freescale/mpc8548cds/tlb.c
+++ b/board/freescale/mpc8548cds/tlb.c
@@ -41,63 +41,66 @@ struct fsl_e_tlb_entry tlb_table[] = {
 		      MAS3_SX|MAS3_SW|MAS3_SR, 0,
 		      0, 0, BOOKE_PAGESZ_4K, 0),
 
+	/* TLB 1 */
 	/*
-	 * TLB 0:	16M	Non-cacheable, guarded
-	 * 0xff000000	16M	FLASH
-	 * Out of reset this entry is only 4K.
+	 * Entry 0:	16M	Non-cacheable, guarded
+	 * 0xff00_0000	16M	FLASH(cover boot page)
 	 */
-	SET_TLB_ENTRY(1, CONFIG_SYS_BOOT_BLOCK, CONFIG_SYS_BOOT_BLOCK,
+	SET_TLB_ENTRY(1, CONFIG_SYS_FLASH_BASE, CONFIG_SYS_FLASH_BASE_PHYS,
 		      MAS3_SX|MAS3_SW|MAS3_SR, MAS2_I|MAS2_G,
 		      0, 0, BOOKE_PAGESZ_16M, 1),
 
 	/*
-	 * TLB 1:	1G	Non-cacheable, guarded
-	 * 0x80000000	1G	PCI1/PCIE  8,9,a,b
+	 * Entry 1:	1M	Non-cacheable, guarded
+	 * 0xe000_0000	1M	CCSRBAR
 	 */
-	SET_TLB_ENTRY(1, CONFIG_SYS_PCI_VIRT, CONFIG_SYS_PCI_PHYS,
+	SET_TLB_ENTRY(1, CONFIG_SYS_CCSRBAR, CONFIG_SYS_CCSRBAR_PHYS,
 		      MAS3_SX|MAS3_SW|MAS3_SR, MAS2_I|MAS2_G,
-		      0, 1, BOOKE_PAGESZ_1G, 1),
+		      0, 1, BOOKE_PAGESZ_1M, 1),
 
 	/*
-	 * TLB 2:	256M	Non-cacheable, guarded
+	 * Entry 2:	64M	Cacheable, non-guarded
+	 * 0xf000_0000	64M	LBC SDRAM
 	 */
-	SET_TLB_ENTRY(1, CONFIG_SYS_SRIO1_MEM_VIRT, CONFIG_SYS_SRIO1_MEM_PHYS,
-		      MAS3_SX|MAS3_SW|MAS3_SR, MAS2_I|MAS2_G,
-		      0, 2, BOOKE_PAGESZ_256M, 1),
+	SET_TLB_ENTRY(1, CONFIG_SYS_LBC_SDRAM_BASE,
+		      CONFIG_SYS_LBC_SDRAM_BASE_PHYS,
+		      MAS3_SX|MAS3_SW|MAS3_SR, 0,
+		      0, 2, BOOKE_PAGESZ_64M, 1),
 
 	/*
-	 * TLB 3:	256M	Non-cacheable, guarded
+	 * Entry 3:	1M	Non-cacheable, guarded
+	 * 0xf800_0000	1M	CADMUS registers
 	 */
-	SET_TLB_ENTRY(1, CONFIG_SYS_SRIO1_MEM_VIRT + 0x10000000, CONFIG_SYS_SRIO1_MEM_PHYS + 0x10000000,
+	SET_TLB_ENTRY(1, CADMUS_BASE_ADDR, CADMUS_BASE_ADDR_PHYS,
 		      MAS3_SX|MAS3_SW|MAS3_SR, MAS2_I|MAS2_G,
-		      0, 3, BOOKE_PAGESZ_256M, 1),
+		      0, 3, BOOKE_PAGESZ_1M, 1),
 
 	/*
-	 * TLB 5:	64M	Non-cacheable, guarded
-	 * 0xe000_0000	1M	CCSRBAR
-	 * 0xe200_0000	1M	PCI1 IO
-	 * 0xe210_0000	1M	PCI2 IO
-	 * 0xe300_0000	1M	PCIe IO
+	 * Entry 4:	1G	Non-cacheable, guarded
+	 * 0x8000_0000	256G	PCI1 MEM
+	 * 0x9000_0000	256M	PCI2 MEM
+	 * 0xa000_0000	512M	PCIe MEM
 	 */
-	SET_TLB_ENTRY(1, CONFIG_SYS_CCSRBAR, CONFIG_SYS_CCSRBAR_PHYS,
+	SET_TLB_ENTRY(1, CONFIG_SYS_PCI1_MEM_VIRT, CONFIG_SYS_PCI1_MEM_PHYS,
 		      MAS3_SX|MAS3_SW|MAS3_SR, MAS2_I|MAS2_G,
-		      0, 5, BOOKE_PAGESZ_64M, 1),
+		      0, 4, BOOKE_PAGESZ_1G, 1),
 
 	/*
-	 * TLB 6:	64M	Cacheable, non-guarded
-	 * 0xf000_0000	64M	LBC SDRAM
+	 * Entry 5:	32M	Non-cacheable, guarded
+	 * 0xe200_0000	8M	PCI1 IO
+	 * 0xe280_0000	8M	PCI2 IO
 	 */
-	SET_TLB_ENTRY(1, CONFIG_SYS_LBC_CACHE_BASE, CONFIG_SYS_LBC_CACHE_BASE,
-		      MAS3_SX|MAS3_SW|MAS3_SR, 0,
-		      0, 6, BOOKE_PAGESZ_64M, 1),
+	SET_TLB_ENTRY(1, CONFIG_SYS_PCI1_IO_VIRT, CONFIG_SYS_PCI1_IO_PHYS,
+		      MAS3_SW|MAS3_SR, MAS2_I|MAS2_G,
+		      0, 5, BOOKE_PAGESZ_16M, 1),
 
 	/*
-	 * TLB 7:	64M	Non-cacheable, guarded
-	 * 0xf8000000	64M	CADMUS registers, relocated L2SRAM
+	 * Entry 6:	32M	Non-cacheable, guarded
+	 * 0xe300_0000	16M	PCIe IO
 	 */
-	SET_TLB_ENTRY(1, CONFIG_SYS_LBC_NONCACHE_BASE, CONFIG_SYS_LBC_NONCACHE_BASE,
-		      MAS3_SX|MAS3_SW|MAS3_SR, MAS2_I|MAS2_G,
-		      0, 7, BOOKE_PAGESZ_64M, 1),
+	SET_TLB_ENTRY(1, CONFIG_SYS_PCIE1_IO_VIRT, CONFIG_SYS_PCIE1_IO_PHYS,
+		      MAS3_SW|MAS3_SR, MAS2_I|MAS2_G,
+		      0, 6, BOOKE_PAGESZ_16M, 1),
 };
 
 int num_tlb_entries = ARRAY_SIZE(tlb_table);
diff --git a/include/configs/MPC8548CDS.h b/include/configs/MPC8548CDS.h
index 2760af0..235c7bb 100644
--- a/include/configs/MPC8548CDS.h
+++ b/include/configs/MPC8548CDS.h
@@ -141,16 +141,20 @@ extern unsigned long get_clock_freq(void);
  * 1111 1111 1000 0000 0110 1110 0110 0101 = ff806e65	 ORx
  */
 
-#define CONFIG_SYS_BOOT_BLOCK		0xff000000	/* boot TLB block */
-#define CONFIG_SYS_FLASH_BASE		CONFIG_SYS_BOOT_BLOCK	/* start of FLASH 16M */
+#define CONFIG_SYS_FLASH_BASE		0xff000000	/* start of FLASH 16M */
+#define CONFIG_SYS_FLASH_BASE_PHYS	CONFIG_SYS_FLASH_BASE
 
-#define CONFIG_SYS_BR0_PRELIM		0xff801001
-#define CONFIG_SYS_BR1_PRELIM		0xff001001
+#define CONFIG_SYS_BR0_PRELIM \
+	(BR_PHYS_ADDR((CONFIG_SYS_FLASH_BASE_PHYS + 0x800000)) \
+	| BR_PS_16 | BR_V)
+#define CONFIG_SYS_BR1_PRELIM \
+	(BR_PHYS_ADDR(CONFIG_SYS_FLASH_BASE_PHYS) | BR_PS_16 | BR_V)
 
 #define	CONFIG_SYS_OR0_PRELIM		0xff806e65
 #define	CONFIG_SYS_OR1_PRELIM		0xff806e65
 
-#define CONFIG_SYS_FLASH_BANKS_LIST	{0xff800000, CONFIG_SYS_FLASH_BASE}
+#define CONFIG_SYS_FLASH_BANKS_LIST \
+	{CONFIG_SYS_FLASH_BASE_PHYS + 0x800000, CONFIG_SYS_FLASH_BASE_PHYS}
 #define CONFIG_SYS_MAX_FLASH_BANKS	2		/* number of banks */
 #define CONFIG_SYS_MAX_FLASH_SECT	128		/* sectors per device */
 #undef	CONFIG_SYS_FLASH_CHECKSUM
@@ -168,12 +172,8 @@ extern unsigned long get_clock_freq(void);
 /*
  * SDRAM on the Local Bus
  */
-#define CONFIG_SYS_LBC_CACHE_BASE	0xf0000000	/* Localbus cacheable */
-#define CONFIG_SYS_LBC_CACHE_SIZE	64
-#define CONFIG_SYS_LBC_NONCACHE_BASE	0xf8000000	/* Localbus non-cacheable */
-#define CONFIG_SYS_LBC_NONCACHE_SIZE	64
-
-#define CONFIG_SYS_LBC_SDRAM_BASE	CONFIG_SYS_LBC_CACHE_BASE	/* Localbus SDRAM */
+#define CONFIG_SYS_LBC_SDRAM_BASE	0xf0000000	/* Localbus SDRAM */
+#define CONFIG_SYS_LBC_SDRAM_BASE_PHYS	CONFIG_SYS_LBC_SDRAM_BASE
 #define CONFIG_SYS_LBC_SDRAM_SIZE	64		/* LBC SDRAM is 64MB */
 
 /*
@@ -194,7 +194,9 @@ extern unsigned long get_clock_freq(void);
  * FIXME: the top 17 bits of BR2.
  */
 
-#define CONFIG_SYS_BR2_PRELIM		0xf0001861
+#define CONFIG_SYS_BR2_PRELIM \
+	(BR_PHYS_ADDR(CONFIG_SYS_LBC_SDRAM_BASE_PHYS) \
+	| BR_PS_32 | (3<<BR_MSEL_SHIFT) | BR_V)
 
 /*
  * The SDRAM size in MB, CONFIG_SYS_LBC_SDRAM_SIZE, is 64.
@@ -265,15 +267,15 @@ extern unsigned long get_clock_freq(void);
 #define CONFIG_FSL_CADMUS
 
 #define CADMUS_BASE_ADDR 0xf8000000
-#define CONFIG_SYS_BR3_PRELIM	 0xf8000801
+#define CADMUS_BASE_ADDR_PHYS	CADMUS_BASE_ADDR
+#define CONFIG_SYS_BR3_PRELIM \
+	(BR_PHYS_ADDR(CADMUS_BASE_ADDR_PHYS) | BR_PS_8 | BR_V)
 #define CONFIG_SYS_OR3_PRELIM	 0xfff00ff7
 
 #define CONFIG_SYS_INIT_RAM_LOCK	1
 #define CONFIG_SYS_INIT_RAM_ADDR	0xe4010000	/* Initial RAM address */
 #define CONFIG_SYS_INIT_RAM_SIZE	0x4000		/* Size of used area in RAM */
 
-#define CONFIG_SYS_INIT_L2_ADDR	0xf8f80000	/* relocate boot L2SRAM */
-
 #define CONFIG_SYS_GBL_DATA_OFFSET	(CONFIG_SYS_INIT_RAM_SIZE - GENERATED_GBL_DATA_SIZE)
 #define CONFIG_SYS_INIT_SP_OFFSET	CONFIG_SYS_GBL_DATA_OFFSET
 
@@ -326,27 +328,24 @@ extern unsigned long get_clock_freq(void);
  * General PCI
  * Memory space is mapped 1-1, but I/O space must start from 0.
  */
-#define CONFIG_SYS_PCI_VIRT		0x80000000	/* 1G PCI TLB */
-#define CONFIG_SYS_PCI_PHYS		0x80000000	/* 1G PCI TLB */
-
 #define CONFIG_SYS_PCI1_MEM_VIRT	0x80000000
 #define CONFIG_SYS_PCI1_MEM_BUS	0x80000000
 #define CONFIG_SYS_PCI1_MEM_PHYS	0x80000000
-#define CONFIG_SYS_PCI1_MEM_SIZE	0x20000000	/* 512M */
+#define CONFIG_SYS_PCI1_MEM_SIZE	0x10000000	/* 256M */
 #define CONFIG_SYS_PCI1_IO_VIRT	0xe2000000
 #define CONFIG_SYS_PCI1_IO_BUS	0x00000000
 #define CONFIG_SYS_PCI1_IO_PHYS	0xe2000000
-#define CONFIG_SYS_PCI1_IO_SIZE	0x00100000	/* 1M */
+#define CONFIG_SYS_PCI1_IO_SIZE	0x00800000	/* 8M */
 
 #ifdef CONFIG_PCI2
-#define CONFIG_SYS_PCI2_MEM_VIRT	0xa0000000
-#define CONFIG_SYS_PCI2_MEM_BUS	0xa0000000
-#define CONFIG_SYS_PCI2_MEM_PHYS	0xa0000000
-#define CONFIG_SYS_PCI2_MEM_SIZE	0x20000000	/* 512M */
+#define CONFIG_SYS_PCI2_MEM_VIRT	0x90000000
+#define CONFIG_SYS_PCI2_MEM_BUS		0x90000000
+#define CONFIG_SYS_PCI2_MEM_PHYS	0x90000000
+#define CONFIG_SYS_PCI2_MEM_SIZE	0x10000000	/* 256M */
 #define CONFIG_SYS_PCI2_IO_VIRT	0xe2800000
 #define CONFIG_SYS_PCI2_IO_BUS	0x00000000
 #define CONFIG_SYS_PCI2_IO_PHYS	0xe2800000
-#define CONFIG_SYS_PCI2_IO_SIZE	0x00100000	/* 1M */
+#define CONFIG_SYS_PCI2_IO_SIZE	0x00800000	/* 8M */
 #endif
 
 #ifdef CONFIG_PCIE1
@@ -358,15 +357,14 @@ extern unsigned long get_clock_freq(void);
 #define CONFIG_SYS_PCIE1_IO_VIRT	0xe3000000
 #define CONFIG_SYS_PCIE1_IO_BUS	0x00000000
 #define CONFIG_SYS_PCIE1_IO_PHYS	0xe3000000
-#define CONFIG_SYS_PCIE1_IO_SIZE	0x00100000	/*   1M */
+#define CONFIG_SYS_PCIE1_IO_SIZE	0x01000000	/* 16M */
 #endif
 
 /*
  * RapidIO MMU
  */
-#define CONFIG_SYS_SRIO1_MEM_VIRT	0xC0000000
-#define CONFIG_SYS_SRIO1_MEM_BUS	0xC0000000
-#define CONFIG_SYS_SRIO1_MEM_PHYS	CONFIG_SYS_SRIO1_MEM_BUS
+#define CONFIG_SYS_SRIO1_MEM_VIRT	0xc0000000
+#define CONFIG_SYS_SRIO1_MEM_PHYS	0xc0000000
 #define CONFIG_SYS_SRIO1_MEM_SIZE	0x20000000	/* 512M */
 
 #ifdef CONFIG_LEGACY
-- 
1.6.4.1




More information about the U-Boot mailing list