[U-Boot] Please pull u-boot-ti/master
Albert ARIBAUD
albert.u.boot at aribaud.net
Thu Sep 8 17:54:03 CEST 2011
Hi Sandeep,
Le 08/09/2011 17:16, s-paulraj at ti.com a écrit :
> Albert,
>
> Please pull u-boot-ti/master.
> I checked all the patches for checkpatch errors and fixed
> all the warnings that i could. Some cannot be fixed.
> Sanjeev's patches update thr GPIO for OMAP. The GPIO on OMAP
> was causing issues which now seem to be fixed.
>
> Regards,
> Sandeep
>
> The following changes since commit 63cf97e825b8d821e2d3d6d6c6604634ac24810a:
> Sanjeev Premi (1):
> omap3: beagle: Fix build warning
>
> are available in the git repository at:
>
> git://git.denx.de/u-boot-ti.git master
>
> Aneesh V (4):
> omap4: factor out common part from board config headers
> omap4: make SDRAM init work for ES1.0 silicon
> omap4: IO settings
> omap4: fix pad configuration settings for SDP and Panda
>
> Howard D. Gray (1):
> ARMV7: OMAP3: Add 37xx ESx revision numbers.
>
> Jason Kridner (1):
> led: remove camel casing of led identifiers globally
>
> Joel A Fernandes (1):
> OMAP: Add function to get state of a GPIO output
>
> Michael Jones (2):
> ARMV7: OMAP: Write more than 1 byte at a time in i2c_write
> ARMV7: OMAP: I2C driver: cosmetic: make checkpatch-compatible
>
> Nagabhushana Netagunte (3):
> da830: modify the U-Boot prompt string
> da830: enable SPI flash boot mode
> da830: modify the MEMTEST start and end address
>
> Sandeep Paulraj (1):
> OMAP3 Beagle: Minor config cleanup
>
> Sanjeev Premi (3):
> omap: gpio: Use generic API
> omap: gpio: generic changes after changing API
> omap: gpio: Adapt board files to use generic API
>
> arch/arm/cpu/arm920t/ep93xx/led.c | 24 ++--
> arch/arm/cpu/arm926ejs/at91/led.c | 12 +-
> arch/arm/cpu/armv7/omap-common/gpio.c | 105 ++++++++++--
> arch/arm/cpu/armv7/omap3/sys_info.c | 13 ++-
> arch/arm/cpu/armv7/omap4/board.c | 62 +++++++
> arch/arm/cpu/armv7/omap4/clocks.c | 5 +-
> arch/arm/cpu/armv7/omap4/emif.c | 72 +-------
> arch/arm/cpu/armv7/omap4/sdram_elpida.c | 24 ++--
> arch/arm/include/asm/arch-omap3/omap3.h | 10 +
> arch/arm/include/asm/arch-omap4/emif.h | 23 +---
> arch/arm/include/asm/arch-omap4/omap4.h | 45 +++++-
> arch/arm/include/asm/omap_gpio.h | 13 --
> arch/arm/lib/board.c | 32 ++--
> board/atmel/at91rm9200ek/led.c | 12 +-
> board/cm_t35/leds.c | 10 +-
> board/comelit/dig297/dig297.c | 12 +-
> board/eukrea/cpu9260/led.c | 48 +++---
> board/isee/igep0020/igep0020.c | 12 +-
> board/logicpd/zoom2/debug_board.c | 10 +-
> board/logicpd/zoom2/led.c | 66 ++++----
> board/logicpd/zoom2/zoom2.c | 10 +-
> board/overo/overo.c | 54 +++---
> board/ti/beagle/beagle.c | 44 +++---
> board/ti/beagle/led.c | 26 ++--
> board/ti/evm/evm.c | 12 +-
> board/ti/panda/panda_mux_data.h | 41 ++---
> board/ti/sdp4430/sdp4430_mux_data.h | 9 +-
> common/cmd_led.c | 8 +-
> doc/README.omap3 | 20 +-
> drivers/i2c/omap24xx_i2c.c | 241 +++++++++++++---------------
> include/configs/da830evm.h | 17 +-
> include/configs/omap3_beagle.h | 1 -
> include/configs/omap4_common.h | 275 +++++++++++++++++++++++++++++++
> include/configs/omap4_panda.h | 244 +--------------------------
> include/configs/omap4_sdp4430.h | 245 +--------------------------
> include/status_led.h | 32 ++--
> 36 files changed, 892 insertions(+), 997 deletions(-)
> create mode 100644 include/configs/omap4_common.h
Rebasing and applying locally right now. What are these warnings that
cannot be eliminated?
Amicalement,
--
Albert.
More information about the U-Boot
mailing list