[U-Boot] Please pull u-boot-ti/master

Paulraj, Sandeep s-paulraj at ti.com
Thu Sep 8 18:52:21 CEST 2011



> 
> Hi Sandeep,
> 
> Le 08/09/2011 17:16, s-paulraj at ti.com a écrit :
> > Albert,
> >
> > Please pull u-boot-ti/master.
> > I checked all the patches for checkpatch errors and fixed
> > all the warnings that i could. Some cannot be fixed.
> > Sanjeev's patches update thr GPIO for OMAP. The GPIO on OMAP
> > was causing issues which now seem to be fixed.
> >
> > Regards,
> > Sandeep
> >
> > The following changes since commit
> 63cf97e825b8d821e2d3d6d6c6604634ac24810a:
> >    Sanjeev Premi (1):
> >          omap3: beagle: Fix build warning
> >
> > are available in the git repository at:
> >
> >    git://git.denx.de/u-boot-ti.git master
> >
> > Aneesh V (4):
> >        omap4: factor out common part from board config headers
> >        omap4: make SDRAM init work for ES1.0 silicon
> >        omap4: IO settings
> >        omap4: fix pad configuration settings for SDP and Panda
> >
> > Howard D. Gray (1):
> >        ARMV7: OMAP3: Add 37xx ESx revision numbers.
> >
> > Jason Kridner (1):
> >        led: remove camel casing of led identifiers globally
> >
> > Joel A Fernandes (1):
> >        OMAP: Add function to get state of a GPIO output
> >
> > Michael Jones (2):
> >        ARMV7: OMAP: Write more than 1 byte at a time in i2c_write
> >        ARMV7: OMAP: I2C driver: cosmetic: make checkpatch-compatible
> >
> > Nagabhushana Netagunte (3):
> >        da830: modify the U-Boot prompt string
> >        da830: enable SPI flash boot mode
> >        da830: modify the MEMTEST start and end address
> >
> > Sandeep Paulraj (1):
> >        OMAP3 Beagle: Minor config cleanup
> >
> > Sanjeev Premi (3):
> >        omap: gpio: Use generic API
> >        omap: gpio: generic changes after changing API
> >        omap: gpio: Adapt board files to use generic API
> >
> 
> Rebasing and applying locally right now. What are these warnings that
> cannot be eliminated?

u-boot does not have linux/gpio.h

checkpatch complains about this.

Regards,
Sandeep



More information about the U-Boot mailing list