[U-Boot] [PATCH 06/26] net: emaclite: Setup RX/TX ping pong for every instance
Michal Simek
monstr at monstr.eu
Tue Sep 13 09:10:01 CEST 2011
Setup RX/TX ping-pong buffer for every emaclite IP separately.
The next patch move initialization directly to board code.
Signed-off-by: Michal Simek <monstr at monstr.eu>
---
drivers/net/xilinx_emaclite.c | 123 ++++++++++++++++++++++------------------
1 files changed, 68 insertions(+), 55 deletions(-)
diff --git a/drivers/net/xilinx_emaclite.c b/drivers/net/xilinx_emaclite.c
index 8e574cd..9342476 100644
--- a/drivers/net/xilinx_emaclite.c
+++ b/drivers/net/xilinx_emaclite.c
@@ -66,6 +66,8 @@
struct xemaclite {
u32 nexttxbuffertouse; /* Next TX buffer to write to */
u32 nextrxbuffertouse; /* Next RX buffer to read from */
+ u32 txpp; /* TX ping pong buffer */
+ u32 rxpp; /* RX ping pong buffer */
};
static u32 etherrxbuff[PKTSIZE_ALIGN/4]; /* Receive buffer */
@@ -131,6 +133,7 @@ static void emaclite_halt(struct eth_device *dev)
static int emaclite_init(struct eth_device *dev, bd_t *bis)
{
+ struct xemaclite *emaclite = dev->priv;
debug ("EmacLite Initialization Started\n");
/*
@@ -150,28 +153,28 @@ static int emaclite_init(struct eth_device *dev, bd_t *bis)
XEL_TSR_PROG_MAC_ADDR) != 0)
;
-#ifdef CONFIG_XILINX_EMACLITE_TX_PING_PONG
- /* The same operation with PONG TX */
- out_be32 (dev->iobase + XEL_TSR_OFFSET + XEL_BUFFER_OFFSET, 0);
- xemaclite_alignedwrite(dev->enetaddr, dev->iobase +
- XEL_BUFFER_OFFSET, ENET_ADDR_LENGTH);
- out_be32 (dev->iobase + XEL_TPLR_OFFSET, ENET_ADDR_LENGTH);
- out_be32 (dev->iobase + XEL_TSR_OFFSET + XEL_BUFFER_OFFSET,
- XEL_TSR_PROG_MAC_ADDR);
- while ((in_be32 (dev->iobase + XEL_TSR_OFFSET +
- XEL_BUFFER_OFFSET) & XEL_TSR_PROG_MAC_ADDR) != 0)
- ;
-#endif
+ if (emaclite->txpp) {
+ /* The same operation with PONG TX */
+ out_be32 (dev->iobase + XEL_TSR_OFFSET + XEL_BUFFER_OFFSET, 0);
+ xemaclite_alignedwrite(dev->enetaddr, dev->iobase +
+ XEL_BUFFER_OFFSET, ENET_ADDR_LENGTH);
+ out_be32 (dev->iobase + XEL_TPLR_OFFSET, ENET_ADDR_LENGTH);
+ out_be32 (dev->iobase + XEL_TSR_OFFSET + XEL_BUFFER_OFFSET,
+ XEL_TSR_PROG_MAC_ADDR);
+ while ((in_be32 (dev->iobase + XEL_TSR_OFFSET +
+ XEL_BUFFER_OFFSET) & XEL_TSR_PROG_MAC_ADDR) != 0)
+ ;
+ }
/*
* RX - RX_PING & RX_PONG initialization
*/
/* Write out the value to flush the RX buffer */
out_be32 (dev->iobase + XEL_RSR_OFFSET, XEL_RSR_RECV_IE_MASK);
-#ifdef CONFIG_XILINX_EMACLITE_RX_PING_PONG
- out_be32 (dev->iobase + XEL_RSR_OFFSET + XEL_BUFFER_OFFSET,
- XEL_RSR_RECV_IE_MASK);
-#endif
+
+ if (emaclite->rxpp)
+ out_be32 (dev->iobase + XEL_RSR_OFFSET + XEL_BUFFER_OFFSET,
+ XEL_RSR_RECV_IE_MASK);
debug ("EmacLite Initialization complete\n");
return 0;
@@ -221,10 +224,10 @@ static int emaclite_send (struct eth_device *dev, volatile void *ptr, int len)
printf ("Error: Timeout waiting for ethernet TX buffer\n");
/* Restart PING TX */
out_be32 (dev->iobase + XEL_TSR_OFFSET, 0);
-#ifdef CONFIG_XILINX_EMACLITE_TX_PING_PONG
- out_be32 (dev->iobase + XEL_TSR_OFFSET +
- XEL_BUFFER_OFFSET, 0);
-#endif
+ if (emaclite->txpp) {
+ out_be32 (dev->iobase + XEL_TSR_OFFSET +
+ XEL_BUFFER_OFFSET, 0);
+ }
return -1;
}
@@ -237,9 +240,9 @@ static int emaclite_send (struct eth_device *dev, volatile void *ptr, int len)
&& ((in_be32 ((baseaddress) + XEL_TSR_OFFSET)
& XEL_TSR_XMIT_ACTIVE_MASK) == 0)) {
-#ifdef CONFIG_XILINX_EMACLITE_TX_PING_PONG
- emaclite->nexttxbuffertouse ^= XEL_BUFFER_OFFSET;
-#endif
+ if (emaclite->txpp)
+ emaclite->nexttxbuffertouse ^= XEL_BUFFER_OFFSET;
+
debug ("Send packet from 0x%x\n", baseaddress);
/* Write the frame to the buffer */
xemaclite_alignedwrite ((void *) ptr, baseaddress, len);
@@ -253,28 +256,30 @@ static int emaclite_send (struct eth_device *dev, volatile void *ptr, int len)
out_be32 (baseaddress + XEL_TSR_OFFSET, reg);
return 0;
}
-#ifdef CONFIG_XILINX_EMACLITE_TX_PING_PONG
- /* Switch to second buffer */
- baseaddress ^= XEL_BUFFER_OFFSET;
- /* Determine if the expected buffer address is empty */
- reg = in_be32 (baseaddress + XEL_TSR_OFFSET);
- if (((reg & XEL_TSR_XMIT_BUSY_MASK) == 0)
- && ((in_be32 ((baseaddress) + XEL_TSR_OFFSET)
- & XEL_TSR_XMIT_ACTIVE_MASK) == 0)) {
- debug("Send packet from 0x%x\n", baseaddress);
- /* Write the frame to the buffer */
- xemaclite_alignedwrite ((void *) ptr, baseaddress, len);
- out_be32 (baseaddress + XEL_TPLR_OFFSET,(len &
- (XEL_TPLR_LENGTH_MASK_HI | XEL_TPLR_LENGTH_MASK_LO)));
+
+ if (emaclite->txpp) {
+ /* Switch to second buffer */
+ baseaddress ^= XEL_BUFFER_OFFSET;
+ /* Determine if the expected buffer address is empty */
reg = in_be32 (baseaddress + XEL_TSR_OFFSET);
- reg |= XEL_TSR_XMIT_BUSY_MASK;
- if ((reg & XEL_TSR_XMIT_IE_MASK) != 0) {
- reg |= XEL_TSR_XMIT_ACTIVE_MASK;
+ if (((reg & XEL_TSR_XMIT_BUSY_MASK) == 0)
+ && ((in_be32 ((baseaddress) + XEL_TSR_OFFSET)
+ & XEL_TSR_XMIT_ACTIVE_MASK) == 0)) {
+ debug("Send packet from 0x%x\n", baseaddress);
+ /* Write the frame to the buffer */
+ xemaclite_alignedwrite((void *) ptr, baseaddress, len);
+ out_be32 (baseaddress + XEL_TPLR_OFFSET, (len &
+ (XEL_TPLR_LENGTH_MASK_HI |
+ XEL_TPLR_LENGTH_MASK_LO)));
+ reg = in_be32 (baseaddress + XEL_TSR_OFFSET);
+ reg |= XEL_TSR_XMIT_BUSY_MASK;
+ if ((reg & XEL_TSR_XMIT_IE_MASK) != 0)
+ reg |= XEL_TSR_XMIT_ACTIVE_MASK;
+ out_be32 (baseaddress + XEL_TSR_OFFSET, reg);
+ return 0;
}
- out_be32 (baseaddress + XEL_TSR_OFFSET, reg);
- return 0;
}
-#endif
+
puts ("Error while sending frame\n");
return -1;
}
@@ -290,23 +295,24 @@ static int emaclite_recv(struct eth_device *dev)
reg = in_be32 (baseaddress + XEL_RSR_OFFSET);
debug ("Testing data at address 0x%x\n", baseaddress);
if ((reg & XEL_RSR_RECV_DONE_MASK) == XEL_RSR_RECV_DONE_MASK) {
-#ifdef CONFIG_XILINX_EMACLITE_RX_PING_PONG
- emaclite->nextrxbuffertouse ^= XEL_BUFFER_OFFSET;
-#endif
+ if (emaclite->rxpp)
+ emaclite->nextrxbuffertouse ^= XEL_BUFFER_OFFSET;
} else {
-#ifndef CONFIG_XILINX_EMACLITE_RX_PING_PONG
- debug ("No data was available - address 0x%x\n", baseaddress);
- return 0;
-#else
- baseaddress ^= XEL_BUFFER_OFFSET;
- reg = in_be32 (baseaddress + XEL_RSR_OFFSET);
- if ((reg & XEL_RSR_RECV_DONE_MASK) !=
- XEL_RSR_RECV_DONE_MASK) {
+
+ if (!emaclite->rxpp) {
debug ("No data was available - address 0x%x\n",
- baseaddress);
+ baseaddress);
return 0;
+ } else {
+ baseaddress ^= XEL_BUFFER_OFFSET;
+ reg = in_be32 (baseaddress + XEL_RSR_OFFSET);
+ if ((reg & XEL_RSR_RECV_DONE_MASK) !=
+ XEL_RSR_RECV_DONE_MASK) {
+ debug("No data was available - address 0x%x\n",
+ baseaddress);
+ return 0;
+ }
}
-#endif
}
/* Get the length of the frame that arrived */
switch(((ntohl(in_be32 (baseaddress + XEL_RXBUFF_OFFSET + 0xC))) &
@@ -358,6 +364,13 @@ int xilinx_emaclite_initialize (bd_t *bis, int base_addr)
dev->priv = emaclite;
+#ifdef CONFIG_XILINX_EMACLITE_TX_PING_PONG
+ emaclite->txpp = 1;
+#endif
+#ifdef CONFIG_XILINX_EMACLITE_RX_PING_PONG
+ emaclite->rxpp = 1;
+#endif
+
sprintf(dev->name, "Xelite.%x", base_addr);
dev->iobase = base_addr;
--
1.5.5.6
More information about the U-Boot
mailing list