[U-Boot] [PATCH] Add OSE as bootm config for affected board configs
Wolfgang Denk
wd at denx.de
Wed Sep 21 12:40:09 CEST 2011
Dear Torkel Lundgren,
In message <1316590255-3681-1-git-send-email-torkel.lundgren at enea.com> you wrote:
> Signed-off-by: Torkel Lundgren <torkel.lundgren at enea.com>
> ---
> include/configs/MPC8260ADS.h | 5 +++++
> include/configs/MPC8266ADS.h | 5 +++++
> include/configs/MPC8308RDB.h | 5 +++++
> include/configs/MPC8313ERDB.h | 5 +++++
> include/configs/MPC8315ERDB.h | 5 +++++
> include/configs/MPC8323ERDB.h | 5 +++++
> include/configs/MPC832XEMDS.h | 5 +++++
> include/configs/MPC8349EMDS.h | 5 +++++
> include/configs/MPC8349ITX.h | 5 +++++
> include/configs/MPC8360EMDS.h | 5 +++++
> include/configs/MPC8360ERDK.h | 5 +++++
> include/configs/MPC837XEMDS.h | 5 +++++
> include/configs/MPC837XERDB.h | 5 +++++
> include/configs/MPC8536DS.h | 5 +++++
> include/configs/MPC8540ADS.h | 5 +++++
> include/configs/MPC8541CDS.h | 5 +++++
> include/configs/MPC8544DS.h | 5 +++++
> include/configs/MPC8548CDS.h | 5 +++++
> include/configs/MPC8555CDS.h | 5 +++++
> include/configs/MPC8560ADS.h | 5 +++++
> include/configs/MPC8568MDS.h | 5 +++++
> include/configs/MPC8569MDS.h | 5 +++++
> include/configs/MPC8572DS.h | 5 +++++
> include/configs/MPC8610HPCD.h | 5 +++++
> include/configs/MPC8641HPCN.h | 5 +++++
> include/configs/MPC86xADS.h | 5 +++++
> include/configs/MPC885ADS.h | 5 +++++
> include/configs/PMC405.h | 5 +++++
> include/configs/PMC405DE.h | 5 +++++
> include/configs/Sandpoint8240.h | 5 +++++
> include/configs/Sandpoint8245.h | 5 +++++
> include/configs/at91sam9260ek.h | 5 +++++
> include/configs/at91sam9261ek.h | 5 +++++
> include/configs/at91sam9263ek.h | 5 +++++
> include/configs/integratorap.h | 5 +++++
> include/configs/integratorcp.h | 5 +++++
> include/configs/ixdp425.h | 5 +++++
> include/configs/ixdpg425.h | 5 +++++
> include/configs/microblaze-generic.h | 5 +++++
> include/configs/mpc8308_p1m.h | 5 +++++
> include/configs/mx31ads.h | 6 ++++++
> include/configs/mx31pdk.h | 6 ++++++
> include/configs/ocotea.h | 6 ++++++
> include/configs/omap1510inn.h | 5 +++++
> include/configs/omap5912osk.h | 5 +++++
> include/configs/ppmc7xx.h | 5 +++++
> include/configs/xilinx-ppc.h | 5 +++++
> 47 files changed, 238 insertions(+), 0 deletions(-)
You change a huge number of board configurations, without notifying
the respective board maintainers. This is a bad idea in general.
But in any case - what makes you think these boards would want to have
this option enabled? I don't think they do. It increases the code
size for a use case that is probably irrelevant to what appears to be
the overwhelming majority of users.
I recommend you leave it up to the board maintainers wether they want
to enable this option or not.
And BTW: CONFIG_BOOTM_OSE is completely undocumented. Could you
please add the needed documentation first?
And finally:
> /*
> + * BOOTM options
> + */
> +#define CONFIG_BOOTM_OSE 1
Please never define any values for options that select features only,
i. e. drop all these '1'.
Thanks.
Best regards,
Wolfgang Denk
--
DENX Software Engineering GmbH, MD: Wolfgang Denk & Detlev Zundel
HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany
Phone: (+49)-8142-66989-10 Fax: (+49)-8142-66989-80 Email: wd at denx.de
The reasonable man adapts himself to the world; the unreasonable one
persists in trying to adapt the world to himself. Therefore all
progress depends on the unreasonable man." - George Bernard Shaw
More information about the U-Boot
mailing list