[U-Boot] [PATCH 1/9] powerpc/mpc8548cds: Fix booting message

Zhao Chenhui chenhui.zhao at freescale.com
Tue Sep 13 09:15:23 CEST 2011


From: chenhui zhao <chenhui.zhao at freescale.com>

Align the output for PCI. Replace "PCI" with "PCI1".

Signed-off-by: Zhao Chenhui <chenhui.zhao at freescale.com>
---
 board/freescale/mpc8548cds/mpc8548cds.c |    6 +++---
 1 files changed, 3 insertions(+), 3 deletions(-)

diff --git a/board/freescale/mpc8548cds/mpc8548cds.c b/board/freescale/mpc8548cds/mpc8548cds.c
index f70a972..8ab9752 100644
--- a/board/freescale/mpc8548cds/mpc8548cds.c
+++ b/board/freescale/mpc8548cds/mpc8548cds.c
@@ -120,7 +120,7 @@ void lbc_sdram_init(void)
 
 	puts("LBC SDRAM: ");
 	print_size(CONFIG_SYS_LBC_SDRAM_SIZE * 1024 * 1024,
-		   "\n       ");
+		   "\n");
 
 	/*
 	 * Setup SDRAM Base and Option Registers
@@ -236,7 +236,7 @@ void pci_init_board(void)
 			law_size_bits(pci_info.io_size), pci_info.law);
 
 		pci_agent = fsl_setup_hose(&pci1_hose, pci_info.regs);
-		printf("PCI: %d bit, %s MHz, %s, %s, %s (base address %lx)\n",
+		printf("PCI1: %d bit, %s MHz, %s, %s, %s (base address %lx)\n",
 			(pci_32) ? 32 : 64,
 			(pci_speed == 33333000) ? "33" :
 			(pci_speed == 66666000) ? "66" : "unknown",
@@ -261,7 +261,7 @@ void pci_init_board(void)
 		}
 #endif
 	} else {
-		printf("PCI: disabled\n");
+		printf("PCI1: disabled\n");
 	}
 
 	puts("\n");
-- 
1.6.4.1




More information about the U-Boot mailing list