[U-Boot] U-Boot hanging for devkit8000 by TIMLL

[bhimsen.kulkarni at wipro.com]

Hello,

                I have a devkit8000 from TIMLL, I am trying to use
u-boot latest code from your git repository.  But it is hanging at the
following place.  The enabled debug logs are as below.

 

U-Boot 2011.09-rc1-00023-g7aabad2-dirty (Sep 21 2011 - 20:05:22)

 

U-Boot code: 80008000 -> 8004921C  BSS: -> 8007E668

OMAP3530-GP ES3.1, CPU-OPP2, L3-165MHz, Max CPU Clock 600 mHz

OMAP3 DevKit8000 + LPDDR/NAND

I2C:   ready

monitor len: 00076668

ramsize: 08000000

TLB table at: 87ff0000

Top of RAM usable for U-Boot at: 87ff0000

Reserving 473k for U-Boot at: 87f79000

Reserving 256k for malloc() at: 87f39000

Reserving 32 Bytes for Board Info at: 87f38fe0

Reserving 120 Bytes for Global Data at: 87f38f68

New Stack Pointer is: 87f38f58

RAM Configuration:

Bank #0: 80000000 128

 

Can anybody help me coming out of this?

 

Thanks & Regards

Bhimsen Kulkarni


Please do not print this email unless it is absolutely necessary. 

The information contained in this electronic message and any attachments to this message are intended for the exclusive use of the addressee(s) and may contain proprietary, confidential or privileged information. If you are not the intended recipient, you should not disseminate, distribute or copy this e-mail. Please notify the sender immediately and destroy all copies of this message and any attachments. 

WARNING: Computer viruses can be transmitted via email. The recipient should check this email and any attachments for the presence of viruses. The company accepts no liability for any damage caused by any virus transmitted by this email. 

www.wipro.com