[U-Boot] [PATCH 4/13] imx31_litekit: Remove dram_init_banksize()

[Fabio Estevam]

As only one RAM bank is used we can rely on the code from arch/arm/lib/board.c

Signed-off-by: Fabio Estevam <fabio.estevam at freescale.com>
---
 board/logicpd/imx31_litekit/imx31_litekit.c |    6 ------
 include/configs/imx31_litekit.h             |    2 +-
 2 files changed, 1 insertions(+), 7 deletions(-)

diff --git a/board/logicpd/imx31_litekit/imx31_litekit.c b/board/logicpd/imx31_litekit/imx31_litekit.c
index 09cc9c5..0402a0b 100644
--- a/board/logicpd/imx31_litekit/imx31_litekit.c
+++ b/board/logicpd/imx31_litekit/imx31_litekit.c
@@ -37,12 +37,6 @@ int dram_init(void)
 	return 0;
 }
 
-void dram_init_banksize(void)
-{
-	gd->bd->bi_dram[0].start = PHYS_SDRAM_1;
-	gd->bd->bi_dram[0].size = PHYS_SDRAM_1_SIZE;
-}
-
 int board_early_init_f(void)
 {
 	__REG(CSCR_U(0)) = 0x0000cf03; /* CS0: Nor Flash */
diff --git a/include/configs/imx31_litekit.h b/include/configs/imx31_litekit.h
index b7f1cb3..2a02b3d 100644
--- a/include/configs/imx31_litekit.h
+++ b/include/configs/imx31_litekit.h
@@ -150,7 +150,7 @@
 #define PHYS_SDRAM_1_SIZE	(128 * 1024 * 1024)
 #define CONFIG_BOARD_EARLY_INIT_F
 
-#define CONFIG_SYS_SDRAM_BASE		CSD0_BASE
+#define CONFIG_SYS_SDRAM_BASE		PHYS_SDRAM_1
 #define CONFIG_SYS_INIT_RAM_ADDR	IRAM_BASE_ADDR
 #define CONFIG_SYS_INIT_RAM_SIZE		IRAM_SIZE
 #define CONFIG_SYS_GBL_DATA_OFFSET	(CONFIG_SYS_INIT_RAM_SIZE - GENERATED_GBL_DATA_SIZE)
-- 
1.6.0.4