[U-Boot] [PATCH 4/13] imx31_litekit: Remove dram_init_banksize()
Stefano Babic
sbabic at denx.de
Fri Sep 23 10:52:53 CEST 2011
On 09/22/2011 08:07 PM, Fabio Estevam wrote:
> As only one RAM bank is used we can rely on the code from arch/arm/lib/board.c
>
> Signed-off-by: Fabio Estevam <fabio.estevam at freescale.com>
> ---
> board/logicpd/imx31_litekit/imx31_litekit.c | 6 ------
> include/configs/imx31_litekit.h | 2 +-
> 2 files changed, 1 insertions(+), 7 deletions(-)
>
> diff --git a/board/logicpd/imx31_litekit/imx31_litekit.c b/board/logicpd/imx31_litekit/imx31_litekit.c
> index 09cc9c5..0402a0b 100644
> --- a/board/logicpd/imx31_litekit/imx31_litekit.c
> +++ b/board/logicpd/imx31_litekit/imx31_litekit.c
> @@ -37,12 +37,6 @@ int dram_init(void)
> return 0;
> }
>
> -void dram_init_banksize(void)
> -{
> - gd->bd->bi_dram[0].start = PHYS_SDRAM_1;
> - gd->bd->bi_dram[0].size = PHYS_SDRAM_1_SIZE;
> -}
> -
> int board_early_init_f(void)
> {
> __REG(CSCR_U(0)) = 0x0000cf03; /* CS0: Nor Flash */
> diff --git a/include/configs/imx31_litekit.h b/include/configs/imx31_litekit.h
> index b7f1cb3..2a02b3d 100644
> --- a/include/configs/imx31_litekit.h
> +++ b/include/configs/imx31_litekit.h
> @@ -150,7 +150,7 @@
> #define PHYS_SDRAM_1_SIZE (128 * 1024 * 1024)
> #define CONFIG_BOARD_EARLY_INIT_F
>
> -#define CONFIG_SYS_SDRAM_BASE CSD0_BASE
> +#define CONFIG_SYS_SDRAM_BASE PHYS_SDRAM_1
> #define CONFIG_SYS_INIT_RAM_ADDR IRAM_BASE_ADDR
> #define CONFIG_SYS_INIT_RAM_SIZE IRAM_SIZE
> #define CONFIG_SYS_GBL_DATA_OFFSET (CONFIG_SYS_INIT_RAM_SIZE - GENERATED_GBL_DATA_SIZE)
Applied to u-boot-imx, next branch, thanks.
Best regards,
Stefano Babic
--
=====================================================================
DENX Software Engineering GmbH, MD: Wolfgang Denk & Detlev Zundel
HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany
Phone: +49-8142-66989-0 Fax: +49-8142-66989-80 Email: office at denx.de
=====================================================================
More information about the U-Boot
mailing list