[U-Boot] Please pull u-boot-ti/master

[Albert ARIBAUD]

Hi Sandeep,

Le 08/09/2011 17:16, s-paulraj at ti.com a écrit :
> Albert,
>
> Please pull u-boot-ti/master.
> I checked all the patches for checkpatch errors and fixed
> all the warnings that i could. Some cannot be fixed.
> Sanjeev's patches update thr GPIO for OMAP. The GPIO on OMAP
> was causing issues which now seem to be fixed.
>
> Regards,
> Sandeep
>
> The following changes since commit 63cf97e825b8d821e2d3d6d6c6604634ac24810a:
>    Sanjeev Premi (1):
>          omap3: beagle: Fix build warning
>
> are available in the git repository at:
>
>    git://git.denx.de/u-boot-ti.git master
>
> Aneesh V (4):
>        omap4: factor out common part from board config headers
>        omap4: make SDRAM init work for ES1.0 silicon
>        omap4: IO settings
>        omap4: fix pad configuration settings for SDP and Panda
>
> Howard D. Gray (1):
>        ARMV7: OMAP3: Add 37xx ESx revision numbers.
>
> Jason Kridner (1):
>        led: remove camel casing of led identifiers globally
>
> Joel A Fernandes (1):
>        OMAP: Add function to get state of a GPIO output
>
> Michael Jones (2):
>        ARMV7: OMAP: Write more than 1 byte at a time in i2c_write
>        ARMV7: OMAP: I2C driver: cosmetic: make checkpatch-compatible
>
> Nagabhushana Netagunte (3):
>        da830: modify the U-Boot prompt string
>        da830: enable SPI flash boot mode
>        da830: modify the MEMTEST start and end address
>
> Sandeep Paulraj (1):
>        OMAP3 Beagle: Minor config cleanup
>
> Sanjeev Premi (3):
>        omap: gpio: Use generic API
>        omap: gpio: generic changes after changing API
>        omap: gpio: Adapt board files to use generic API
>
>   arch/arm/cpu/arm920t/ep93xx/led.c       |   24 ++--
>   arch/arm/cpu/arm926ejs/at91/led.c       |   12 +-
>   arch/arm/cpu/armv7/omap-common/gpio.c   |  105 ++++++++++--
>   arch/arm/cpu/armv7/omap3/sys_info.c     |   13 ++-
>   arch/arm/cpu/armv7/omap4/board.c        |   62 +++++++
>   arch/arm/cpu/armv7/omap4/clocks.c       |    5 +-
>   arch/arm/cpu/armv7/omap4/emif.c         |   72 +-------
>   arch/arm/cpu/armv7/omap4/sdram_elpida.c |   24 ++--
>   arch/arm/include/asm/arch-omap3/omap3.h |   10 +
>   arch/arm/include/asm/arch-omap4/emif.h  |   23 +---
>   arch/arm/include/asm/arch-omap4/omap4.h |   45 +++++-
>   arch/arm/include/asm/omap_gpio.h        |   13 --
>   arch/arm/lib/board.c                    |   32 ++--
>   board/atmel/at91rm9200ek/led.c          |   12 +-
>   board/cm_t35/leds.c                     |   10 +-
>   board/comelit/dig297/dig297.c           |   12 +-
>   board/eukrea/cpu9260/led.c              |   48 +++---
>   board/isee/igep0020/igep0020.c          |   12 +-
>   board/logicpd/zoom2/debug_board.c       |   10 +-
>   board/logicpd/zoom2/led.c               |   66 ++++----
>   board/logicpd/zoom2/zoom2.c             |   10 +-
>   board/overo/overo.c                     |   54 +++---
>   board/ti/beagle/beagle.c                |   44 +++---
>   board/ti/beagle/led.c                   |   26 ++--
>   board/ti/evm/evm.c                      |   12 +-
>   board/ti/panda/panda_mux_data.h         |   41 ++---
>   board/ti/sdp4430/sdp4430_mux_data.h     |    9 +-
>   common/cmd_led.c                        |    8 +-
>   doc/README.omap3                        |   20 +-
>   drivers/i2c/omap24xx_i2c.c              |  241 +++++++++++++---------------
>   include/configs/da830evm.h              |   17 +-
>   include/configs/omap3_beagle.h          |    1 -
>   include/configs/omap4_common.h          |  275 +++++++++++++++++++++++++++++++
>   include/configs/omap4_panda.h           |  244 +--------------------------
>   include/configs/omap4_sdp4430.h         |  245 +--------------------------
>   include/status_led.h                    |   32 ++--
>   36 files changed, 892 insertions(+), 997 deletions(-)
>   create mode 100644 include/configs/omap4_common.h

Applied to u-boot-arm/master, thanks!

Amicalement,
-- 
Albert.