[U-Boot] [PATCH 1/2 V2] EfikaMX: Add imximage config for Efika SB
Marek Vasut
marek.vasut at gmail.com
Sun Sep 25 21:52:04 CEST 2011
Signed-off-by: Marek Vasut <marek.vasut at gmail.com>
Cc: Stefano Babic <sbabic at denx.de>
---
MAINTAINERS | 1 +
board/efikamx/imximage.cfg | 122 -----------------------------------------
board/efikamx/imximage_mx.cfg | 122 +++++++++++++++++++++++++++++++++++++++++
board/efikamx/imximage_sb.cfg | 122 +++++++++++++++++++++++++++++++++++++++++
boards.cfg | 3 +-
5 files changed, 247 insertions(+), 123 deletions(-)
delete mode 100644 board/efikamx/imximage.cfg
create mode 100644 board/efikamx/imximage_mx.cfg
create mode 100644 board/efikamx/imximage_sb.cfg
V2: Tell apart the machines according to MACH_ID. This is a temporary measure
until I figure out how to tell them apart at runtime.
diff --git a/MAINTAINERS b/MAINTAINERS
index 052d7c3..3669bc8 100644
--- a/MAINTAINERS
+++ b/MAINTAINERS
@@ -849,6 +849,7 @@ Marek Vasut <marek.vasut at gmail.com>
vpac270 xscale/pxa
zipitz2 xscale/pxa
efikamx i.MX51
+ efikasb i.MX51
Hugo Villeneuve <hugo.villeneuve at lyrtech.com>
diff --git a/board/efikamx/imximage.cfg b/board/efikamx/imximage.cfg
deleted file mode 100644
index 6fe0ff9..0000000
--- a/board/efikamx/imximage.cfg
+++ /dev/null
@@ -1,122 +0,0 @@
-#
-# Copyright (C) 2010 Marek Vasut <marek.vasut at gmail.com>
-#
-# BASED ON: imx51evk
-#
-# (C) Copyright 2009
-# Stefano Babic DENX Software Engineering sbabic at denx.de.
-#
-# See file CREDITS for list of people who contributed to this
-# project.
-#
-# This program is free software; you can redistribute it and/or
-# modify it under the terms of the GNU General Public License as
-# published by the Free Software Foundation; either version 2 of
-# the License or (at your option) any later version.
-#
-# This program is distributed in the hope that it will be useful,
-# but WITHOUT ANY WARRANTY; without even the implied warranty of
-# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
-# GNU General Public License for more details.
-#
-# You should have received a copy of the GNU General Public License
-# along with this program; if not write to the Free Software
-# Foundation Inc. 51 Franklin Street Fifth Floor Boston,
-# MA 02110-1301 USA
-#
-# Refer docs/README.imxmage for more details about how-to configure
-# and create imximage boot image
-#
-# The syntax is taken as close as possible with the kwbimage
-
-# Boot Device : one of
-# spi, sd (the board has no nand neither onenand)
-BOOT_FROM spi
-
-# Device Configuration Data (DCD)
-#
-# Each entry must have the format:
-# Addr-type Address Value
-#
-# where:
-# Addr-type register length (1,2 or 4 bytes)
-# Address absolute address of the register
-# value value to be stored in the register
-
-# Setting IOMUXC
-DATA 4 0x73fa88a0 0x000
-DATA 4 0x73fa850c 0x20c5
-DATA 4 0x73fa8510 0x20c5
-DATA 4 0x73fa883c 0x5
-DATA 4 0x73fa8848 0x5
-DATA 4 0x73fa84b8 0xe7
-DATA 4 0x73fa84bc 0x45
-DATA 4 0x73fa84c0 0x45
-DATA 4 0x73fa84c4 0x45
-DATA 4 0x73fa84c8 0x45
-DATA 4 0x73fa8820 0x0
-DATA 4 0x73fa84a4 0x5
-DATA 4 0x73fa84a8 0x5
-DATA 4 0x73fa84ac 0xe5
-DATA 4 0x73fa84b0 0xe5
-DATA 4 0x73fa84b4 0xe5
-DATA 4 0x73fa84cc 0xe5
-DATA 4 0x73fa84d0 0xe4
-
-DATA 4 0x73fa882c 0x4
-DATA 4 0x73fa88a4 0x4
-DATA 4 0x73fa88ac 0x4
-DATA 4 0x73fa88b8 0x4
-
-# Setting DDR for micron
-# 13 Rows, 10 Cols, 32 bit, SREF=4 Micron Model
-# CAS=3 BL=4
-# ESDCTL_ESDCTL0
-DATA 4 0x83fd9000 0x82a20000
-# ESDCTL_ESDCTL1
-DATA 4 0x83fd9008 0x82a20000
-# ESDCTL_ESDMISC
-DATA 4 0x83fd9010 0xcaaaf6d0
-# ESDCTL_ESDCFG0
-DATA 4 0x83fd9004 0x3f3574aa
-# ESDCTL_ESDCFG1
-DATA 4 0x83fd900c 0x3f3574aa
-
-# Init DRAM on CS0
-# ESDCTL_ESDSCR
-DATA 4 0x83fd9014 0x04008008
-DATA 4 0x83fd9014 0x0000801a
-DATA 4 0x83fd9014 0x0000801b
-DATA 4 0x83fd9014 0x00448019
-DATA 4 0x83fd9014 0x07328018
-DATA 4 0x83fd9014 0x04008008
-DATA 4 0x83fd9014 0x00008010
-DATA 4 0x83fd9014 0x00008010
-DATA 4 0x83fd9014 0x06328018
-DATA 4 0x83fd9014 0x03808019
-DATA 4 0x83fd9014 0x00408019
-DATA 4 0x83fd9014 0x00008000
-
-# Init DRAM on CS1
-DATA 4 0x83fd9014 0x0400800c
-DATA 4 0x83fd9014 0x0000801e
-DATA 4 0x83fd9014 0x0000801f
-DATA 4 0x83fd9014 0x0000801d
-DATA 4 0x83fd9014 0x0732801c
-DATA 4 0x83fd9014 0x0400800c
-DATA 4 0x83fd9014 0x00008014
-DATA 4 0x83fd9014 0x00008014
-DATA 4 0x83fd9014 0x0632801c
-DATA 4 0x83fd9014 0x0380801d
-DATA 4 0x83fd9014 0x0040801d
-DATA 4 0x83fd9014 0x00008004
-
-# Write to CTL0
-DATA 4 0x83fd9000 0xb2a20000
-# Write to CTL1
-DATA 4 0x83fd9008 0xb2a20000
-# ESDMISC
-DATA 4 0x83fd9010 0x000ad6d0
-#ESDCTL_ESDCDLYGD
-DATA 4 0x83fd9034 0x90000000
-DATA 4 0x83fd9014 0x00000000
diff --git a/board/efikamx/imximage_mx.cfg b/board/efikamx/imximage_mx.cfg
new file mode 100644
index 0000000..6fe0ff9
--- /dev/null
+++ b/board/efikamx/imximage_mx.cfg
@@ -0,0 +1,122 @@
+#
+# Copyright (C) 2010 Marek Vasut <marek.vasut at gmail.com>
+#
+# BASED ON: imx51evk
+#
+# (C) Copyright 2009
+# Stefano Babic DENX Software Engineering sbabic at denx.de.
+#
+# See file CREDITS for list of people who contributed to this
+# project.
+#
+# This program is free software; you can redistribute it and/or
+# modify it under the terms of the GNU General Public License as
+# published by the Free Software Foundation; either version 2 of
+# the License or (at your option) any later version.
+#
+# This program is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+# GNU General Public License for more details.
+#
+# You should have received a copy of the GNU General Public License
+# along with this program; if not write to the Free Software
+# Foundation Inc. 51 Franklin Street Fifth Floor Boston,
+# MA 02110-1301 USA
+#
+# Refer docs/README.imxmage for more details about how-to configure
+# and create imximage boot image
+#
+# The syntax is taken as close as possible with the kwbimage
+
+# Boot Device : one of
+# spi, sd (the board has no nand neither onenand)
+BOOT_FROM spi
+
+# Device Configuration Data (DCD)
+#
+# Each entry must have the format:
+# Addr-type Address Value
+#
+# where:
+# Addr-type register length (1,2 or 4 bytes)
+# Address absolute address of the register
+# value value to be stored in the register
+
+# Setting IOMUXC
+DATA 4 0x73fa88a0 0x000
+DATA 4 0x73fa850c 0x20c5
+DATA 4 0x73fa8510 0x20c5
+DATA 4 0x73fa883c 0x5
+DATA 4 0x73fa8848 0x5
+DATA 4 0x73fa84b8 0xe7
+DATA 4 0x73fa84bc 0x45
+DATA 4 0x73fa84c0 0x45
+DATA 4 0x73fa84c4 0x45
+DATA 4 0x73fa84c8 0x45
+DATA 4 0x73fa8820 0x0
+DATA 4 0x73fa84a4 0x5
+DATA 4 0x73fa84a8 0x5
+DATA 4 0x73fa84ac 0xe5
+DATA 4 0x73fa84b0 0xe5
+DATA 4 0x73fa84b4 0xe5
+DATA 4 0x73fa84cc 0xe5
+DATA 4 0x73fa84d0 0xe4
+
+DATA 4 0x73fa882c 0x4
+DATA 4 0x73fa88a4 0x4
+DATA 4 0x73fa88ac 0x4
+DATA 4 0x73fa88b8 0x4
+
+# Setting DDR for micron
+# 13 Rows, 10 Cols, 32 bit, SREF=4 Micron Model
+# CAS=3 BL=4
+# ESDCTL_ESDCTL0
+DATA 4 0x83fd9000 0x82a20000
+# ESDCTL_ESDCTL1
+DATA 4 0x83fd9008 0x82a20000
+# ESDCTL_ESDMISC
+DATA 4 0x83fd9010 0xcaaaf6d0
+# ESDCTL_ESDCFG0
+DATA 4 0x83fd9004 0x3f3574aa
+# ESDCTL_ESDCFG1
+DATA 4 0x83fd900c 0x3f3574aa
+
+# Init DRAM on CS0
+# ESDCTL_ESDSCR
+DATA 4 0x83fd9014 0x04008008
+DATA 4 0x83fd9014 0x0000801a
+DATA 4 0x83fd9014 0x0000801b
+DATA 4 0x83fd9014 0x00448019
+DATA 4 0x83fd9014 0x07328018
+DATA 4 0x83fd9014 0x04008008
+DATA 4 0x83fd9014 0x00008010
+DATA 4 0x83fd9014 0x00008010
+DATA 4 0x83fd9014 0x06328018
+DATA 4 0x83fd9014 0x03808019
+DATA 4 0x83fd9014 0x00408019
+DATA 4 0x83fd9014 0x00008000
+
+# Init DRAM on CS1
+DATA 4 0x83fd9014 0x0400800c
+DATA 4 0x83fd9014 0x0000801e
+DATA 4 0x83fd9014 0x0000801f
+DATA 4 0x83fd9014 0x0000801d
+DATA 4 0x83fd9014 0x0732801c
+DATA 4 0x83fd9014 0x0400800c
+DATA 4 0x83fd9014 0x00008014
+DATA 4 0x83fd9014 0x00008014
+DATA 4 0x83fd9014 0x0632801c
+DATA 4 0x83fd9014 0x0380801d
+DATA 4 0x83fd9014 0x0040801d
+DATA 4 0x83fd9014 0x00008004
+
+# Write to CTL0
+DATA 4 0x83fd9000 0xb2a20000
+# Write to CTL1
+DATA 4 0x83fd9008 0xb2a20000
+# ESDMISC
+DATA 4 0x83fd9010 0x000ad6d0
+#ESDCTL_ESDCDLYGD
+DATA 4 0x83fd9034 0x90000000
+DATA 4 0x83fd9014 0x00000000
diff --git a/board/efikamx/imximage_sb.cfg b/board/efikamx/imximage_sb.cfg
new file mode 100644
index 0000000..878146f
--- /dev/null
+++ b/board/efikamx/imximage_sb.cfg
@@ -0,0 +1,122 @@
+#
+# Copyright (C) 2010 Marek Vasut <marek.vasut at gmail.com>
+#
+# BASED ON: imx51evk
+#
+# (C) Copyright 2009
+# Stefano Babic DENX Software Engineering sbabic at denx.de.
+#
+# See file CREDITS for list of people who contributed to this
+# project.
+#
+# This program is free software; you can redistribute it and/or
+# modify it under the terms of the GNU General Public License as
+# published by the Free Software Foundation; either version 2 of
+# the License or (at your option) any later version.
+#
+# This program is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+# GNU General Public License for more details.
+#
+# You should have received a copy of the GNU General Public License
+# along with this program; if not write to the Free Software
+# Foundation Inc. 51 Franklin Street Fifth Floor Boston,
+# MA 02110-1301 USA
+#
+# Refer docs/README.imxmage for more details about how-to configure
+# and create imximage boot image
+#
+# The syntax is taken as close as possible with the kwbimage
+
+# Boot Device : one of
+# spi, sd (the board has no nand neither onenand)
+BOOT_FROM spi
+
+# Device Configuration Data (DCD)
+#
+# Each entry must have the format:
+# Addr-type Address Value
+#
+# where:
+# Addr-type register length (1,2 or 4 bytes)
+# Address absolute address of the register
+# value value to be stored in the register
+
+# Setting IOMUXC
+DATA 4 0x73fa88a0 0x200
+DATA 4 0x73fa850c 0x20c3
+DATA 4 0x73fa8510 0x20c3
+DATA 4 0x73fa883c 0x2
+DATA 4 0x73fa8848 0x2
+DATA 4 0x73fa84b8 0xe7
+DATA 4 0x73fa84bc 0x45
+DATA 4 0x73fa84c0 0x45
+DATA 4 0x73fa84c4 0x45
+DATA 4 0x73fa84c8 0x45
+DATA 4 0x73fa8820 0x0
+DATA 4 0x73fa84a4 0x5
+DATA 4 0x73fa84a8 0x5
+DATA 4 0x73fa84ac 0xe3
+DATA 4 0x73fa84b0 0xe3
+DATA 4 0x73fa84b4 0xe3
+DATA 4 0x73fa84cc 0xe3
+DATA 4 0x73fa84d0 0xe2
+
+DATA 4 0x73fa882c 0x4
+DATA 4 0x73fa88a4 0x4
+DATA 4 0x73fa88ac 0x4
+DATA 4 0x73fa88b8 0x4
+
+# Setting DDR for micron
+# 13 Rows, 10 Cols, 32 bit, SREF=4 Micron Model
+# CAS=3 BL=4
+# ESDCTL_ESDCTL0
+DATA 4 0x83fd9000 0x82a20000
+# ESDCTL_ESDCTL1
+DATA 4 0x83fd9008 0x82a20000
+# ESDCTL_ESDMISC
+DATA 4 0x83fd9010 0xcaaaf6d0
+# ESDCTL_ESDCFG0
+DATA 4 0x83fd9004 0x333574aa
+# ESDCTL_ESDCFG1
+DATA 4 0x83fd900c 0x333574aa
+
+# Init DRAM on CS0
+# ESDCTL_ESDSCR
+DATA 4 0x83fd9014 0x04008008
+DATA 4 0x83fd9014 0x0000801a
+DATA 4 0x83fd9014 0x0000801b
+DATA 4 0x83fd9014 0x00448019
+DATA 4 0x83fd9014 0x07328018
+DATA 4 0x83fd9014 0x04008008
+DATA 4 0x83fd9014 0x00008010
+DATA 4 0x83fd9014 0x00008010
+DATA 4 0x83fd9014 0x06328018
+DATA 4 0x83fd9014 0x03808019
+DATA 4 0x83fd9014 0x00408019
+DATA 4 0x83fd9014 0x00008000
+
+# Init DRAM on CS1
+DATA 4 0x83fd9014 0x0400800c
+DATA 4 0x83fd9014 0x0000801e
+DATA 4 0x83fd9014 0x0000801f
+DATA 4 0x83fd9014 0x0000801d
+DATA 4 0x83fd9014 0x0732801c
+DATA 4 0x83fd9014 0x0400800c
+DATA 4 0x83fd9014 0x00008014
+DATA 4 0x83fd9014 0x00008014
+DATA 4 0x83fd9014 0x0632801c
+DATA 4 0x83fd9014 0x0380801d
+DATA 4 0x83fd9014 0x0040801d
+DATA 4 0x83fd9014 0x00008004
+
+# Write to CTL0
+DATA 4 0x83fd9000 0xb2a20000
+# Write to CTL1
+DATA 4 0x83fd9008 0xb2a20000
+# ESDMISC
+DATA 4 0x83fd9010 0xcaaaf6d0
+#ESDCTL_ESDCDLYGD
+DATA 4 0x83fd9034 0x90000000
+DATA 4 0x83fd9014 0x00000000
diff --git a/boards.cfg b/boards.cfg
index 29525b9..c485cd7 100644
--- a/boards.cfg
+++ b/boards.cfg
@@ -157,7 +157,8 @@ dkb arm arm926ejs - Marvell pantheon
integratorap_cm946es arm arm946es integrator armltd - integratorap
integratorcp_cm946es arm arm946es integrator armltd - integratorcp
ca9x4_ct_vxp arm armv7 vexpress armltd
-efikamx arm armv7 efikamx - mx5 efikamx:IMX_CONFIG=board/efikamx/imximage.cfg
+efikamx arm armv7 efikamx - mx5 efikamx:MACH_TYPE=MACH_TYPE_MX51_EFIKAMX,IMX_CONFIG=board/efikamx/imximage_mx.cfg
+efikasb arm armv7 efikamx - mx5 efikamx:MACH_TYPE=MACH_TYPE_MX51_EFIKASB,IMX_CONFIG=board/efikamx/imximage_sb.cfg
mx51evk arm armv7 mx51evk freescale mx5 mx51evk:IMX_CONFIG=board/freescale/mx51evk/imximage.cfg
mx53ard arm armv7 mx53ard freescale mx5 mx53ard:IMX_CONFIG=board/freescale/mx53ard/imximage_dd3.cfg
mx53evk arm armv7 mx53evk freescale mx5 mx53evk:IMX_CONFIG=board/freescale/mx53evk/imximage.cfg
--
1.7.5.4
More information about the U-Boot
mailing list