[U-Boot] [PATCH v4 3/5] /drivers/usb/host/ehci-mxc.c: naming cleanup

[Jana Rapava]

This commit changes MX31 prefix in common USB_CTRL bits to MXC.

Signed-off-by: Jana Rapava <fermata7 at gmail.com>
Cc: Marek Vasut <marek.vasut at gmail.com>
Cc: Stefano Babic <sbabic at denx.de>
Cc: Remy Bohmer <linux at bohmer.net>
---
Changes for v2:
       - changed to proper patch
Changes for v3:
       - merged other USB patches from u-boot-pxa/efikasb
       - offset-based access changed to struct-based access
       - use {clrset,clr,set}bits_le32() calls
       - CodingStyle and naming cleanup
Changes for v4:
	- split into patchset

 drivers/usb/host/ehci-mxc.c |    9 +++------
 1 files changed, 3 insertions(+), 6 deletions(-)

diff --git a/drivers/usb/host/ehci-mxc.c b/drivers/usb/host/ehci-mxc.c
index a0cfbb7..973bb4f 100644
--- a/drivers/usb/host/ehci-mxc.c
+++ b/drivers/usb/host/ehci-mxc.c
@@ -37,9 +37,6 @@
 #endif
 
 #ifdef CONFIG_MX31
-#define MX31_OTG_SIC_SHIFT	29
-#define MX31_OTG_SIC_MASK	(0x3 << MX31_OTG_SIC_SHIFT)
-#define MX31_OTG_PM_BIT		(1 << 24)
 
 #define MX31_H2_SIC_SHIFT	21
 #define MX31_H2_SIC_MASK	(0x3 << MX31_H2_SIC_SHIFT)
@@ -66,11 +63,11 @@ static int mxc_set_usbcontrol(int port, unsigned int flags)
 
 		switch (port) {
 		case 0:	/* OTG port */
-			v &= ~(MX31_OTG_SIC_MASK | MX31_OTG_PM_BIT);
+			v &= ~(MXC_OTG_SIC_MASK | MXC_OTG_PM_BIT);
 			v |= (flags & MXC_EHCI_INTERFACE_MASK)
-					<< MX31_OTG_SIC_SHIFT;
+					<< MXC_OTG_SIC_SHIFT;
 			if (!(flags & MXC_EHCI_POWER_PINS_ENABLED))
-				v |= MX31_OTG_PM_BIT;
+				v |= MXC_OTG_PM_BIT;
 
 			break;
 		case 1: /* H1 port */
-- 
1.7.6.3