[U-Boot] [PATCH] ARM: remove broken "ixpg425" and "ixpg425" boards
Albert ARIBAUD
albert.u.boot at aribaud.net
Thu Sep 22 23:18:31 CEST 2011
---
MAINTAINERS | 2 -
board/ixdp425/Makefile | 50 --------
board/ixdp425/ixdp425.c | 238 ---------------------------------------
boards.cfg | 2 -
doc/README.scrapyard | 2 +
include/configs/ixdp425.h | 268 --------------------------------------------
include/configs/ixdpg425.h | 256 ------------------------------------------
7 files changed, 2 insertions(+), 816 deletions(-)
delete mode 100644 board/ixdp425/Makefile
delete mode 100644 board/ixdp425/ixdp425.c
delete mode 100644 include/configs/ixdp425.h
delete mode 100644 include/configs/ixdpg425.h
diff --git a/MAINTAINERS b/MAINTAINERS
index 2f60a60..5b2fb57 100644
--- a/MAINTAINERS
+++ b/MAINTAINERS
@@ -786,7 +786,6 @@ John Rigby <jcrigby at gmail.com>
Stefan Roese <sr at denx.de>
- ixdpg425 xscale/ixp
pdnb3 xscale/ixp
scpu xscale/ixp
@@ -894,7 +893,6 @@ Unknown / orphaned boards:
Board CPU Last known maintainer / Comment
.........................................................................
cradle xscale/pxa Kyle Harris <kharris at nexus-tech.net> / dead address
- ixdp425 xscale/ixp Kyle Harris <kharris at nexus-tech.net> / dead address
lubbock xscale/pxa Kyle Harris <kharris at nexus-tech.net> / dead address
imx31_phycore_eet i.MX31 Guennadi Liakhovetski <g.liakhovetski at gmx.de> / resigned
diff --git a/board/ixdp425/Makefile b/board/ixdp425/Makefile
deleted file mode 100644
index 4ba0383..0000000
--- a/board/ixdp425/Makefile
+++ /dev/null
@@ -1,50 +0,0 @@
-#
-# (C) Copyright 2000-2006
-# Wolfgang Denk, DENX Software Engineering, wd at denx.de.
-#
-# See file CREDITS for list of people who contributed to this
-# project.
-#
-# This program is free software; you can redistribute it and/or
-# modify it under the terms of the GNU General Public License as
-# published by the Free Software Foundation; either version 2 of
-# the License, or (at your option) any later version.
-#
-# This program is distributed in the hope that it will be useful,
-# but WITHOUT ANY WARRANTY; without even the implied warranty of
-# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
-# GNU General Public License for more details.
-#
-# You should have received a copy of the GNU General Public License
-# along with this program; if not, write to the Free Software
-# Foundation, Inc., 59 Temple Place, Suite 330, Boston,
-# MA 02111-1307 USA
-#
-
-include $(TOPDIR)/config.mk
-
-LIB = $(obj)lib$(BOARD).o
-
-COBJS := ixdp425.o
-
-SRCS := $(SOBJS:.o=.S) $(COBJS:.o=.c)
-OBJS := $(addprefix $(obj),$(COBJS))
-SOBJS := $(addprefix $(obj),$(SOBJS))
-
-$(LIB): $(obj).depend $(OBJS)
- $(call cmd_link_o_target, $(OBJS))
-
-clean:
- rm -f $(SOBJS) $(OBJS)
-
-distclean: clean
- rm -f $(LIB) core *.bak $(obj).depend
-
-#########################################################################
-
-# defines $(obj).depend target
-include $(SRCTREE)/rules.mk
-
-sinclude $(obj).depend
-
-#########################################################################
diff --git a/board/ixdp425/ixdp425.c b/board/ixdp425/ixdp425.c
deleted file mode 100644
index 7269458..0000000
--- a/board/ixdp425/ixdp425.c
+++ /dev/null
@@ -1,238 +0,0 @@
-/*
- * (C) Copyright 2006
- * Stefan Roese, DENX Software Engineering, sr at denx.de.
- *
- * (C) Copyright 2002
- * Kyle Harris, Nexus Technologies, Inc. kharris at nexus-tech.net
- *
- * (C) Copyright 2002
- * Sysgo Real-Time Solutions, GmbH <www.elinos.com>
- * Marius Groeger <mgroeger at sysgo.de>
- *
- * See file CREDITS for list of people who contributed to this
- * project.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of
- * the License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
- * MA 02111-1307 USA
- */
-
-#include <common.h>
-#include <command.h>
-#include <malloc.h>
-#include <netdev.h>
-#include <asm/arch/ixp425.h>
-#include <asm/io.h>
-#ifdef CONFIG_PCI
-#include <pci.h>
-#include <asm/arch/ixp425pci.h>
-#endif
-
-DECLARE_GLOBAL_DATA_PTR;
-
-#define IXDP425_LED_PORT 0x52000000 /* 4-digit hex display */
-
-int board_early_init_f(void)
-{
- /* CS2: LED port */
- writel(0xbcff0002, IXP425_EXP_CS2);
- writew(0x0001, IXDP425_LED_PORT); /* output postcode to LEDs */
-
- return 0;
-}
-
-#ifdef CONFIG_PCI
-#ifndef CONFIG_PCI_PNP
-static struct pci_config_table pci_ixpdp425_config_table[] = {
- { PCI_ANY_ID, PCI_ANY_ID, PCI_ANY_ID, PCI_ANY_ID, 0x00, PCI_ANY_ID,
- pci_cfgfunc_config_device,
- { 0x400,
- 0x40000000,
- PCI_COMMAND_IO | PCI_COMMAND_MEMORY | PCI_COMMAND_MASTER } },
-
- { PCI_ANY_ID, PCI_ANY_ID, PCI_ANY_ID, PCI_ANY_ID, 0x01, PCI_ANY_ID,
- pci_cfgfunc_config_device,
- { 0x800,
- 0x40010000,
- PCI_COMMAND_IO | PCI_COMMAND_MEMORY | PCI_COMMAND_MASTER } },
-
- { PCI_ANY_ID, PCI_ANY_ID, PCI_ANY_ID, PCI_ANY_ID, 0x02, PCI_ANY_ID,
- pci_cfgfunc_config_device,
- { 0xc00,
- 0x40020000,
- PCI_COMMAND_IO | PCI_COMMAND_MEMORY | PCI_COMMAND_MASTER } },
-
- { PCI_ANY_ID, PCI_ANY_ID, PCI_ANY_ID, PCI_ANY_ID, 0x03, PCI_ANY_ID,
- pci_cfgfunc_config_device,
- { 0x1000,
- 0x40030000,
- PCI_COMMAND_IO | PCI_COMMAND_MEMORY | PCI_COMMAND_MASTER } },
- { }
-};
-#endif
-
-struct pci_controller hose = {
-#ifndef CONFIG_PCI_PNP
- config_table: pci_ixpdp425_config_table,
-#endif
-};
-#endif /* CONFIG_PCI */
-
-
-/*
- * Miscelaneous platform dependent initialisations
- */
-int board_init(void)
-{
- writew(0x0002, IXDP425_LED_PORT); /* output postcode to LEDs */
-
-#ifdef CONFIG_IXDPG425
- /* arch number of IXDP */
- gd->bd->bi_arch_number = MACH_TYPE_IXDPG425;
-#else
- /* arch number of IXDP */
- gd->bd->bi_arch_number = MACH_TYPE_IXDP425;
-#endif
-
- /* adress of boot parameters */
- gd->bd->bi_boot_params = 0x00000100;
-
-#ifdef CONFIG_IXDPG425
- /*
- * Get realtek RTL8305 switch and SLIC out of reset
- */
- GPIO_OUTPUT_SET(CONFIG_SYS_GPIO_SWITCH_RESET_N);
- GPIO_OUTPUT_ENABLE(CONFIG_SYS_GPIO_SWITCH_RESET_N);
- GPIO_OUTPUT_SET(CONFIG_SYS_GPIO_SLIC_RESET_N);
- GPIO_OUTPUT_ENABLE(CONFIG_SYS_GPIO_SLIC_RESET_N);
-
- /*
- * Setup GPIOs for PCI INTA & INTB
- */
- GPIO_OUTPUT_DISABLE(CONFIG_SYS_GPIO_PCI_INTA_N);
- GPIO_INT_ACT_LOW_SET(CONFIG_SYS_GPIO_PCI_INTA_N);
- GPIO_OUTPUT_DISABLE(CONFIG_SYS_GPIO_PCI_INTB_N);
- GPIO_INT_ACT_LOW_SET(CONFIG_SYS_GPIO_PCI_INTB_N);
-
- /* Setup GPIOs for 33MHz clock output */
- writel(0x01FF01FF, IXP425_GPIO_GPCLKR);
-
- GPIO_OUTPUT_ENABLE(CONFIG_SYS_GPIO_PCI_CLK);
- GPIO_OUTPUT_ENABLE(CONFIG_SYS_GPIO_EXTBUS_CLK);
-
- /* set GPIO8..11 interrupt type to active low */
- writel((0x1 << 9) | (0x1 << 6) | (0x1 << 3) | 0x1, IXP425_GPIO_GPIT2R);
-
- /* clear pending interrupts */
- writel(-1, IXP425_GPIO_GPISR);
-
- /* assert PCI reset */
- GPIO_OUTPUT_CLEAR(CONFIG_SYS_GPIO_SLIC_RESET_N);
-
- udelay(533);
-
- /* deassert PCI reset */
- GPIO_OUTPUT_SET(CONFIG_SYS_GPIO_SLIC_RESET_N);
-
- udelay(533);
-
-#else /* IXDP425 */
- /* Setup GPIOs for 33MHz ExpBus and PCI clock output */
- writel(0x01FF01FF, IXP425_GPIO_GPCLKR);
- GPIO_OUTPUT_ENABLE(CONFIG_SYS_GPIO_PCI_CLK);
- GPIO_OUTPUT_ENABLE(CONFIG_SYS_GPIO_EXTBUS_CLK);
- GPIO_OUTPUT_ENABLE(CONFIG_SYS_GPIO_PCI_RESET_N);
-
- /* set GPIO8..11 interrupt type to active low */
- writel((0x1 << 9) | (0x1 << 6) | (0x1 << 3) | 0x1, IXP425_GPIO_GPIT2R);
- /* clear pending interrupts */
- writel(-1, IXP425_GPIO_GPISR);
-
- /* assert PCI reset */
- GPIO_OUTPUT_CLEAR(CONFIG_SYS_GPIO_PCI_RESET_N);
-
- udelay(533);
-
- /* deassert PCI reset */
- GPIO_OUTPUT_SET(CONFIG_SYS_GPIO_PCI_RESET_N);
-
- udelay(533);
-#endif
-
- return 0;
-}
-
-/*
- * Check Board Identity
- */
-int checkboard(void)
-{
- char buf[64];
- int i = getenv_f("serial#", buf, sizeof(buf));
-
-#ifdef CONFIG_IXDPG425
- puts("Board: IXDPG425 - Intel Network Gateway Reference Platform");
-#else
- puts("Board: IXDP425 - Intel Development Platform");
-#endif
-
- if (i > 0) {
- puts(", serial# ");
- puts(buf);
- }
- putc('\n');
-
- return 0;
-}
-
-int dram_init(void)
-{
- /* we can only map 64MB via PCI, so we limit memory
- until a better solution is implemented. */
-#ifdef CONFIG_PCI
- gd->ram_size = get_ram_size(CONFIG_SYS_SDRAM_BASE, 64<<20);
-#else
- gd->ram_size = get_ram_size(CONFIG_SYS_SDRAM_BASE, 256<<20);
-#endif
- return 0;
-}
-
-#ifdef CONFIG_PCI
-void pci_init_board(void)
-{
- pci_ixp_init(&hose);
-}
-
-/*
- * dev 0 on the PCI bus is not the host bridge, so we have to override
- * these functions in order to not skip PCI slot 0 during configuration.
-*/
-int pci_skip_dev(struct pci_controller *hose, pci_dev_t dev)
-{
- return 0;
-}
-int pci_print_dev(struct pci_controller *hose, pci_dev_t dev)
-{
- return 1;
-}
-
-#endif
-
-int board_eth_init(bd_t *bis)
-{
-#ifdef CONFIG_PCI
- pci_eth_init(bis);
-#endif
- return cpu_eth_init(bis);
-}
diff --git a/boards.cfg b/boards.cfg
index 8a5bfc1..d32ff7e 100644
--- a/boards.cfg
+++ b/boards.cfg
@@ -194,8 +194,6 @@ actux2 arm ixp
actux3 arm ixp
actux4 arm ixp
dvlhost arm ixp
-ixdp425 arm ixp
-ixdpg425 arm ixp ixdp425
balloon3 arm pxa
cerf250 arm pxa
colibri_pxa270 arm pxa
diff --git a/doc/README.scrapyard b/doc/README.scrapyard
index d68da2e..30aeccd 100644
--- a/doc/README.scrapyard
+++ b/doc/README.scrapyard
@@ -69,3 +69,5 @@ MVS1 powerpc MPC823 306620b 2008-08-26 Andre Schwarz <andre.schwarz at matrix-vis
adsvix ARM PXA27x 7610db1 2008-07-30 Adrian Filipi <adrian.filipi at eurotech.com>
R5200 ColdFire 48ead7a 2008-03-31 Zachary P. Landau <zachary.landau at labxtechnologies.com>
CPCI440 powerpc 440GP b568fd2 2007-12-27 Matthias Fuchs <matthias.fuchs at esd-electronics.com>
+ixdpg425 ARM xscale/ixp - 2011-09-22 Stefan Roese <sr at denx.de>
+ixdp425 ARM xscale/ixp - 2011-09-22 Kyle Harris <kharris at nexus-tech.net>
diff --git a/include/configs/ixdp425.h b/include/configs/ixdp425.h
deleted file mode 100644
index d6ef3b3..0000000
--- a/include/configs/ixdp425.h
+++ /dev/null
@@ -1,268 +0,0 @@
-/*
- * (C) Copyright 2003
- * Kyle Harris, Nexus Technologies, Inc. kharris at nexus-tech.net
- *
- * Configuation settings for the IXDP425 board.
- *
- * See file CREDITS for list of people who contributed to this
- * project.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of
- * the License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
- * MA 02111-1307 USA
- */
-
-#ifndef __CONFIG_H
-#define __CONFIG_H
-
-/*
- * High Level Configuration Options
- * (easy to change)
- */
-#define CONFIG_IXP425 1 /* This is an IXP425 CPU */
-#define CONFIG_IXDP425 1 /* on an IXDP425 Board */
-
-#define CONFIG_DISPLAY_CPUINFO 1 /* display cpu info (and speed) */
-#define CONFIG_DISPLAY_BOARDINFO 1 /* display board info */
-
-/*
- * select serial console configuration
- */
-#define CONFIG_IXP_SERIAL
-#define CONFIG_SYS_IXP425_CONSOLE IXP425_UART1
-#define CONFIG_BAUDRATE 115200
-
-#define CONFIG_BOARD_EARLY_INIT_F 1
-
-/***************************************************************
- * U-boot generic defines start here.
- ***************************************************************/
-
-/*
- * Size of malloc() pool
- */
-#define CONFIG_SYS_MALLOC_LEN (CONFIG_ENV_SIZE + 128*1024)
-
-/* allow to overwrite serial and ethaddr */
-#define CONFIG_ENV_OVERWRITE
-
-/*
- * BOOTP options
- */
-#define CONFIG_BOOTP_BOOTFILESIZE
-#define CONFIG_BOOTP_BOOTPATH
-#define CONFIG_BOOTP_GATEWAY
-#define CONFIG_BOOTP_HOSTNAME
-
-/* Command line configuration. */
-#include <config_cmd_default.h>
-
-#define CONFIG_CMD_ELF
-
-#define CONFIG_PCI
-#ifdef CONFIG_PCI
-#define CONFIG_CMD_PCI
-#define CONFIG_PCI_PNP
-#define CONFIG_IXP_PCI
-#define CONFIG_PCI_SCAN_SHOW
-#define CONFIG_CMD_PCI_ENUM
-#define CONFIG_EEPRO100
-#endif
-
-#define CONFIG_BOOTCOMMAND "run boot_flash"
-/* enable passing of ATAGs */
-#define CONFIG_CMDLINE_TAG 1
-#define CONFIG_SETUP_MEMORY_TAGS 1
-#define CONFIG_INITRD_TAG 1
-
-#if defined(CONFIG_CMD_KGDB)
-#define CONFIG_KGDB_BAUDRATE 230400 /* speed to run kgdb serial port */
-#define CONFIG_KGDB_SER_INDEX 2 /* which serial port to use */
-#endif
-
-/* Miscellaneous configurable options */
-#define CONFIG_SYS_LONGHELP /* undef to save memory */
-#define CONFIG_SYS_PROMPT "=> " /* Monitor Command Prompt */
-#define CONFIG_SYS_CBSIZE 256 /* Console I/O Buffer Size */
-#define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE+sizeof(CONFIG_SYS_PROMPT)+16) /* Print Buffer Size */
-#define CONFIG_SYS_MAXARGS 16 /* max number of command args */
-#define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE /* Boot Argument Buffer Size */
-
-#define CONFIG_SYS_MEMTEST_START 0x00400000 /* memtest works on */
-#define CONFIG_SYS_MEMTEST_END 0x00800000 /* 4 ... 8 MB in DRAM */
-
-/* timer clock - 2* OSC_IN system clock */
-#define CONFIG_IXP425_TIMER_CLK 66666666
-#define CONFIG_SYS_HZ 1000
-
-/* default load address */
-#define CONFIG_SYS_LOAD_ADDR 0x00010000
-
-#define CONFIG_SYS_BAUDRATE_TABLE { 9600, 19200, 38400, 57600, 115200 }
-
-/*
- * Stack sizes
- *
- * The stack sizes are set up in start.S using the settings below
- */
-#define CONFIG_STACKSIZE (128*1024) /* regular stack */
-
-/***************************************************************
- * Platform/Board specific defines start here.
- ***************************************************************/
-
-/*
- * Hardware drivers
- */
-
-/*
- * Physical Memory Map
- */
-#define CONFIG_SYS_TEXT_BASE 0x50000000
-
-#define PHYS_FLASH_1 0x50000000 /* Flash Bank #1 */
-#define PHYS_FLASH_SIZE 0x00800000 /* 8 MB */
-#define PHYS_FLASH_BANK_SIZE 0x00800000 /* 8 MB Banks */
-#define PHYS_FLASH_SECT_SIZE 0x00020000 /* 128 KB sectors (x1) */
-
-#define CONFIG_SYS_FLASH_BASE PHYS_FLASH_1
-#define CONFIG_SYS_MONITOR_BASE CONFIG_SYS_FLASH_BASE
-#define CONFIG_SYS_MONITOR_LEN (256 << 10) /* Reserve 256 kB for Monitor */
-#define CONFIG_BOARD_SIZE_LIMIT 262144
-
-/* Expansion bus settings */
-#define CONFIG_SYS_EXP_CS0 0xbcd23c42
-
-/* SDRAM settings */
-#define CONFIG_NR_DRAM_BANKS 1 /* we have 2 banks of DRAM */
-#define PHYS_SDRAM_1 0x00000000 /* SDRAM Bank #1 */
-#define CONFIG_SYS_SDRAM_BASE 0x00000000
-
-#define CONFIG_SYS_SDR_CONFIG 0xd
-#define CONFIG_SYS_SDR_MODE_CONFIG 0x1
-#define CONFIG_SYS_SDRAM_REFRESH_CNT 0x81a
-
-/*
- * FLASH and environment organization
- */
-#define CONFIG_SYS_MAX_FLASH_BANKS 1 /* max number of memory banks */
-#define CONFIG_SYS_MAX_FLASH_SECT 128 /* max number of sectors on one chip */
-
-#define CONFIG_ENV_IS_IN_FLASH 1
-
-#define CONFIG_SYS_FLASH_BANKS_LIST { PHYS_FLASH_1 }
-
-#define CONFIG_SYS_FLASH_ERASE_TOUT 120000 /* Timeout for Flash Erase (in ms) */
-#define CONFIG_SYS_FLASH_WRITE_TOUT 500 /* Timeout for Flash Write (in ms) */
-
-#define CONFIG_ENV_SECT_SIZE 0x20000 /* size of one complete sector */
-#define CONFIG_ENV_ADDR (PHYS_FLASH_1 + 0x40000)
-#define CONFIG_ENV_SIZE 0x2000 /* Total Size of Environment Sector */
-
-/* Use common CFI driver */
-#define CONFIG_SYS_FLASH_CFI
-#define CONFIG_FLASH_CFI_DRIVER
-/* no byte writes on IXP4xx */
-#define CONFIG_SYS_FLASH_CFI_WIDTH FLASH_CFI_16BIT
-/* print 'E' for empty sector on flinfo */
-#define CONFIG_SYS_FLASH_EMPTY_INFO
-
-/* Ethernet */
-
-/* include IXP4xx NPE support */
-#define CONFIG_IXP4XX_NPE 1
-#define CONFIG_NET_MULTI 1
-/* NPE0 PHY address */
-#define CONFIG_PHY_ADDR 0
-/* NPE1 PHY address (HW Release E only) */
-#define CONFIG_PHY1_ADDR 1
-/* MII PHY management */
-#define CONFIG_MII 1
-/* Number of ethernet rx buffers & descriptors */
-#define CONFIG_SYS_RX_ETH_BUFFER 16
-
-#define CONFIG_HAS_ETH1 1
-
-#define CONFIG_CMD_DHCP
-#define CONFIG_CMD_NET
-#define CONFIG_CMD_MII
-#define CONFIG_CMD_PING
-#undef CONFIG_CMD_NFS
-
-/* Cache Configuration */
-#define CONFIG_SYS_CACHELINE_SIZE 32
-
-#define CONFIG_EXTRA_ENV_SETTINGS \
- "npe_ucode=50060000\0" \
- "mtd=IXP4XX-Flash.0:256k(uboot),128k(env),128k(ucode),2048k(linux),-(root)\0" \
- "kerneladdr=50080000\0" \
- "kernelfile=ixdp425/uImage\0" \
- "rootfile=ixdp425/rootfs\0" \
- "rootaddr=50280000\0" \
- "loadaddr=10000\0" \
- "updateboot_ser=mw.b 10000 ff 40000;" \
- " loady ${loadaddr};" \
- " run eraseboot writeboot\0" \
- "updateboot_net=mw.b 10000 ff 40000;" \
- " tftp ${loadaddr} ixdp425/u-boot.bin;" \
- " run eraseboot writeboot\0" \
- "eraseboot=protect off 50000000 5003ffff;" \
- " erase 50000000 5003ffff\0" \
- "writeboot=cp.b 10000 50000000 ${filesize}\0" \
- "updateucode=loady;" \
- " era ${npe_ucode} +${filesize};" \
- " cp.b ${loadaddr} ${npe_ucode} ${filesize}\0" \
- "updateroot=tftp ${loadaddr} ${rootfile};" \
- " era ${rootaddr} +${filesize};" \
- " cp.b ${loadaddr} ${rootaddr} ${filesize}\0" \
- "updatekern=tftp ${loadaddr} ${kernelfile};" \
- " era ${kerneladdr} +${filesize};" \
- " cp.b ${loadaddr} ${kerneladdr} ${filesize}\0" \
- "flashargs=setenv bootargs mtdparts=${mtd} root=/dev/mtdblock4" \
- " rootfstype=squashfs,jffs2 init=/etc/preinit\0" \
- "netargs=setenv bootargs mtdparts=${mtd} root=/dev/mtdblock4" \
- " rootfstype=squashfs,jffs2 init=/etc/preinit\0" \
- "addtty=setenv bootargs ${bootargs} console=ttyS0,${baudrate}\0" \
- "addeth=setenv bootargs ${bootargs} ethaddr=${ethaddr}\0" \
- "boot_flash=run flashargs addtty addeth;" \
- " bootm ${kerneladdr}\0" \
- "boot_net=run netargs addtty addeth;" \
- " tftpboot ${loadaddr} ${kernelfile};" \
- " bootm\0"
-
-/* additions for new relocation code, must be added to all boards */
-#define CONFIG_SYS_INIT_SP_ADDR \
- (CONFIG_SYS_SDRAM_BASE + 0x1000 - GENERATED_GBL_DATA_SIZE)
-
-/*
- * GPIO settings
- */
-#define CONFIG_SYS_GPIO_UTOPIA_GPIO1 0
-#define CONFIG_SYS_GPIO_UTOPIA_IRQ_N 1
-#define CONFIG_SYS_GPIO_HSS1_IRQ_N 2
-#define CONFIG_SYS_GPIO_HSS0_IRQ_N 3
-#define CONFIG_SYS_GPIO_ETH0_IRQ_N 4
-#define CONFIG_SYS_GPIO_ETH1_IRQ_N 5
-#define CONFIG_SYS_GPIO_I2C_SCL 6
-#define CONFIG_SYS_GPIO_I2C_SDA 7
-#define CONFIG_SYS_GPIO_PCI_INTD_N 8
-#define CONFIG_SYS_GPIO_PCI_INTC_N 9
-#define CONFIG_SYS_GPIO_PCI_INTB_N 10
-#define CONFIG_SYS_GPIO_PCI_INTA_N 11
-#define CONFIG_SYS_GPIO_UTOPIA_GPIO0 12
-#define CONFIG_SYS_GPIO_PCI_RESET_N 13
-#define CONFIG_SYS_GPIO_PCI_CLK 14
-#define CONFIG_SYS_GPIO_EXTBUS_CLK 15
-
-#endif /* __CONFIG_H */
diff --git a/include/configs/ixdpg425.h b/include/configs/ixdpg425.h
deleted file mode 100644
index 3de0013..0000000
--- a/include/configs/ixdpg425.h
+++ /dev/null
@@ -1,256 +0,0 @@
-/*
- * (C) Copyright 2005-2006
- * Stefan Roese, DENX Software Engineering, sr at denx.de.
- *
- * (C) Copyright 2003
- * Martijn de Gouw, Prodrive B.V., martijn.de.gouw at prodrive.nl
- *
- * Configuation settings for the IXDPG425 board.
- *
- * See file CREDITS for list of people who contributed to this
- * project.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of
- * the License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
- * MA 02111-1307 USA
- */
-
-#ifndef __CONFIG_H
-#define __CONFIG_H
-
-/*
- * High Level Configuration Options
- * (easy to change)
- */
-#define CONFIG_IXP425 1 /* This is an IXP425 CPU */
-#define CONFIG_IXDPG425 1 /* on an IXDPG425 Board */
-
-#define CONFIG_DISPLAY_CPUINFO 1 /* display cpu info (and speed) */
-#define CONFIG_DISPLAY_BOARDINFO 1 /* display board info */
-
-/*
- * Ethernet
- */
-#define CONFIG_IXP4XX_NPE 1 /* include IXP4xx NPE support */
-#define CONFIG_NET_MULTI 1
-#define CONFIG_PHY_ADDR 5 /* NPE0 PHY address */
-#define CONFIG_HAS_ETH1
-#define CONFIG_PHY1_ADDR 4 /* NPE1 PHY address */
-#define CONFIG_MII 1 /* MII PHY management */
-#define CONFIG_SYS_RX_ETH_BUFFER 16 /* Number of ethernet rx buffers & descriptors */
-
-/*
- * Misc configuration options
- */
-
-#define CONFIG_BOOTCOUNT_LIMIT /* support for bootcount limit */
-#define CONFIG_SYS_BOOTCOUNT_ADDR 0x60003000 /* inside qmrg sram */
-
-#define CONFIG_CMDLINE_TAG 1 /* enable passing of ATAGs */
-#define CONFIG_SETUP_MEMORY_TAGS 1
-#define CONFIG_INITRD_TAG 1
-
-/*
- * Size of malloc() pool
- */
-#define CONFIG_SYS_MALLOC_LEN (256 << 10)
-
-/* allow to overwrite serial and ethaddr */
-#define CONFIG_ENV_OVERWRITE
-
-#define CONFIG_IXP_SERIAL
-#define CONFIG_BAUDRATE 115200
-#define CONFIG_SYS_IXP425_CONSOLE IXP425_UART1 /* we use UART1 for console */
-
-
-/*
- * BOOTP options
- */
-#define CONFIG_BOOTP_BOOTFILESIZE
-#define CONFIG_BOOTP_BOOTPATH
-#define CONFIG_BOOTP_GATEWAY
-#define CONFIG_BOOTP_HOSTNAME
-
-
-/*
- * Command line configuration.
- */
-#include <config_cmd_default.h>
-
-#define CONFIG_CMD_DHCP
-#define CONFIG_CMD_ELF
-#define CONFIG_CMD_NET
-#define CONFIG_CMD_MII
-#define CONFIG_CMD_PING
-
-
-#define CONFIG_ZERO_BOOTDELAY_CHECK /* check for keypress on bootdelay==0 */
-#define CONFIG_BOOTDELAY 5 /* autoboot after 5 seconds */
-
-/*
- * Miscellaneous configurable options
- */
-#define CONFIG_SYS_LONGHELP /* undef to save memory */
-#define CONFIG_SYS_PROMPT "=> " /* Monitor Command Prompt */
-#define CONFIG_SYS_CBSIZE 256 /* Console I/O Buffer Size */
-#define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE+sizeof(CONFIG_SYS_PROMPT)+16) /* Print Buffer Size */
-#define CONFIG_SYS_MAXARGS 16 /* max number of command args */
-#define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE /* Boot Argument Buffer Size */
-
-#define CONFIG_SYS_MEMTEST_START 0x00400000 /* memtest works on */
-#define CONFIG_SYS_MEMTEST_END 0x00800000 /* 4 ... 8 MB in DRAM */
-#define CONFIG_SYS_LOAD_ADDR 0x00010000 /* default load address */
-
-#define CONFIG_IXP425_TIMER_CLK 66666666
-#define CONFIG_SYS_HZ 1000 /* decrementer freq: 1 ms ticks */
-
- /* valid baudrates */
-#define CONFIG_SYS_BAUDRATE_TABLE { 9600, 19200, 38400, 57600, 115200 }
-
-/*
- * Stack sizes
- *
- * The stack sizes are set up in start.S using the settings below
- */
-#define CONFIG_STACKSIZE (128*1024) /* regular stack */
-#ifdef CONFIG_USE_IRQ
-#define CONFIG_STACKSIZE_IRQ (4*1024) /* IRQ stack */
-#define CONFIG_STACKSIZE_FIQ (4*1024) /* FIQ stack */
-#endif
-
-/***************************************************************
- * Platform/Board specific defines start here.
- ***************************************************************/
-
-/*-----------------------------------------------------------------------
- * Default configuration (environment varibles...)
- *----------------------------------------------------------------------*/
-#define CONFIG_PREBOOT "echo;" \
- "echo Type \\\"run flash_nfs\\\" to mount root filesystem over NFS;" \
- "echo"
-
-#undef CONFIG_BOOTARGS
-
-#define CONFIG_EXTRA_ENV_SETTINGS \
- "netdev=eth0\0" \
- "hostname=ixdpg425\0" \
- "nfsargs=setenv bootargs root=/dev/nfs rw " \
- "nfsroot=${serverip}:${rootpath}\0" \
- "ramargs=setenv bootargs root=/dev/ram rw\0" \
- "addip=setenv bootargs ${bootargs} " \
- "ip=${ipaddr}:${serverip}:${gatewayip}:${netmask}" \
- ":${hostname}:${netdev}:off panic=1\0" \
- "addtty=setenv bootargs ${bootargs} console=ttyS0,${baudrate}\0"\
- "flash_nfs=run nfsargs addip addtty;" \
- "bootm ${kernel_addr}\0" \
- "flash_self=run ramargs addip addtty;" \
- "bootm ${kernel_addr} ${ramdisk_addr}\0" \
- "net_nfs=tftp 200000 ${bootfile};run nfsargs addip addtty;" \
- "bootm\0" \
- "rootpath=/opt/eldk/arm\0" \
- "bootfile=/tftpboot/ixdpg425/uImage\0" \
- "kernel_addr=50080000\0" \
- "ramdisk_addr=50200000\0" \
- "load=tftp 100000 /tftpboot/ixdpg425/u-boot.bin\0" \
- "update=protect off 50000000 5003ffff;era 50000000 5003ffff;" \
- "cp.b 100000 50000000 40000;" \
- "setenv filesize;saveenv\0" \
- "upd=run load update\0" \
- ""
-#define CONFIG_BOOTCOMMAND "run net_nfs"
-
-/*
- * Physical Memory Map
- */
-#define CONFIG_NR_DRAM_BANKS 1 /* we have 2 banks of DRAM */
-#define PHYS_SDRAM_1 0x00000000 /* SDRAM Bank #1 */
-#define PHYS_SDRAM_1_SIZE 0x02000000 /* 32 MB */
-
-#define CONFIG_SYS_TEXT_BASE 0x50000000
-
-#define PHYS_FLASH_1 0x50000000 /* Flash Bank #1 */
-#define PHYS_FLASH_SIZE 0x01000000 /* 16 MB */
-#define PHYS_FLASH_BANK_SIZE 0x01000000 /* 16 MB Banks */
-#define PHYS_FLASH_SECT_SIZE 0x00020000 /* 128 KB sectors (x1) */
-
-#define CONFIG_SYS_DRAM_BASE 0x00000000
-#define CONFIG_SYS_DRAM_SIZE 0x01000000
-
-#define CONFIG_SYS_FLASH_BASE PHYS_FLASH_1
-#define CONFIG_SYS_MONITOR_BASE CONFIG_SYS_FLASH_BASE
-#define CONFIG_SYS_MONITOR_LEN (256 << 10) /* Reserve 256 kB for Monitor */
-
-/*
- * Expansion bus settings
- */
-#define CONFIG_SYS_EXP_CS0 0xbcd23c42
-
-/*
- * SDRAM settings
- */
-#define CONFIG_SYS_SDR_CONFIG 0x18
-#define CONFIG_SYS_SDR_MODE_CONFIG 0x1
-#define CONFIG_SYS_SDRAM_REFRESH_CNT 0x81a
-
-/*
- * FLASH and environment organization
- */
-#define CONFIG_SYS_MAX_FLASH_BANKS 1 /* max number of memory banks */
-#define CONFIG_SYS_MAX_FLASH_SECT 128 /* max number of sectors on one chip */
-
-#define CONFIG_SYS_FLASH_CFI /* The flash is CFI compatible */
-#define CONFIG_FLASH_CFI_DRIVER /* Use common CFI driver */
-#define CONFIG_ENV_IS_IN_FLASH 1
-
-#define CONFIG_SYS_FLASH_USE_BUFFER_WRITE 1 /* use buffered writes (20x faster) */
-#define CONFIG_SYS_FLASH_PROTECTION 1 /* hardware flash protection */
-
-#define CONFIG_SYS_FLASH_BANKS_LIST { PHYS_FLASH_1 }
-
-#define CONFIG_SYS_FLASH_CFI_WIDTH FLASH_CFI_16BIT /* no byte writes on IXP4xx */
-
-#define CONFIG_SYS_FLASH_ERASE_TOUT 120000 /* Timeout for Flash Erase (in ms) */
-#define CONFIG_SYS_FLASH_WRITE_TOUT 500 /* Timeout for Flash Write (in ms) */
-
-#define CONFIG_SYS_FLASH_EMPTY_INFO /* print 'E' for empty sector on flinfo */
-
-#define CONFIG_ENV_SECT_SIZE 0x20000 /* size of one complete sector */
-#define CONFIG_ENV_ADDR (PHYS_FLASH_1 + 0x40000)
-#define CONFIG_ENV_SIZE 0x2000 /* Total Size of Environment Sector */
-
-/* Address and size of Redundant Environment Sector */
-#define CONFIG_ENV_ADDR_REDUND (CONFIG_ENV_ADDR + CONFIG_ENV_SECT_SIZE)
-#define CONFIG_ENV_SIZE_REDUND (CONFIG_ENV_SIZE)
-
-/*
- * GPIO settings
- */
-#define CONFIG_SYS_GPIO_PCI_INTA_N 6
-#define CONFIG_SYS_GPIO_PCI_INTB_N 7
-#define CONFIG_SYS_GPIO_SWITCH_RESET_N 8
-#define CONFIG_SYS_GPIO_SLIC_RESET_N 13
-#define CONFIG_SYS_GPIO_PCI_CLK 14
-#define CONFIG_SYS_GPIO_EXTBUS_CLK 15
-
-/*
- * Cache Configuration
- */
-#define CONFIG_SYS_CACHELINE_SIZE 32
-
-/* additions for new relocation code, must be added to all boards */
-#define CONFIG_SYS_SDRAM_BASE 0
-#define CONFIG_SYS_INIT_SP_ADDR \
- (CONFIG_SYS_SDRAM_BASE + 0x1000 - GENERATED_GBL_DATA_SIZE)
-
-#endif /* __CONFIG_H */
--
1.7.4.1
More information about the U-Boot
mailing list