[U-Boot] [PATCH v2 4/7] Add bootgraph instrumentation for ARM boards

Andrew Murray amurray at theiet.org
Sat Sep 10 14:37:04 CEST 2011


From: Andrew Murray <amurray at mpcdata.com>

This patch adds bootgraph instrumentation for ARM boards.
---
Changes for v2:
	- Use improvde DO_INITCALL_RET macro
	- Fix compiler warnings

Signed-off-by: Andrew Murray <amurray at theiet.org>
---
 arch/arm/lib/board.c |   26 +++++++++++++++++---------
 1 files changed, 17 insertions(+), 9 deletions(-)

diff --git a/arch/arm/lib/board.c b/arch/arm/lib/board.c
index 169dfeb..7b09bf1 100644
--- a/arch/arm/lib/board.c
+++ b/arch/arm/lib/board.c
@@ -282,7 +282,7 @@ void board_init_f (ulong bootflag)
 	gd->mon_len = _bss_end_ofs;
 
 	for (init_fnc_ptr = init_sequence; *init_fnc_ptr; ++init_fnc_ptr) {
-		if ((*init_fnc_ptr)() != 0) {
+		if (DO_INITCALL_RET(*init_fnc_ptr) != 0) {
 			hang ();
 		}
 	}
@@ -416,6 +416,9 @@ void board_init_f (ulong bootflag)
 	debug ("relocation Offset is: %08lx\n", gd->reloc_off);
 	memcpy (id, (void *)gd, sizeof (gd_t));
 
+#if defined(CONFIG_BOOT_TRACE)
+	printf("performing relocate to ram to 0x%08lx\n", addr);
+#endif
 	relocate_code (addr_sp, id, addr);
 
 	/* NOTREACHED - relocate_code() does not return */
@@ -444,6 +447,10 @@ void board_init_r (gd_t *id, ulong dest_addr)
 	ulong flash_size;
 #endif
 
+#if defined(CONFIG_BOOT_TRACE)
+	printf("completed relocate to ram\n");
+#endif
+
 	gd = id;
 	bd = gd->bd;
 
@@ -451,7 +458,8 @@ void board_init_r (gd_t *id, ulong dest_addr)
 
 	monitor_flash_len = _end_ofs;
 	debug ("monitor flash len: %08lX\n", monitor_flash_len);
-	board_init();	/* Setup chipselects */
+
+	DO_INITCALL(board_init);	/* Setup chipselects */
 
 #ifdef CONFIG_SERIAL_MULTI
 	serial_initialize();
@@ -499,7 +507,7 @@ void board_init_r (gd_t *id, ulong dest_addr)
 
 #if defined(CONFIG_CMD_NAND)
 	puts ("NAND:  ");
-	nand_init();		/* go init the NAND */
+	DO_INITCALL(nand_init);		/* go init the NAND */
 #endif
 
 #if defined(CONFIG_CMD_ONENAND)
@@ -508,7 +516,7 @@ void board_init_r (gd_t *id, ulong dest_addr)
 
 #ifdef CONFIG_GENERIC_MMC
        puts("MMC:   ");
-       mmc_initialize(bd);
+       DO_INITCALL(mmc_initialize, bd);
 #endif
 
 #ifdef CONFIG_HAS_DATAFLASH
@@ -517,7 +525,7 @@ void board_init_r (gd_t *id, ulong dest_addr)
 #endif
 
 	/* initialize environment */
-	env_relocate ();
+	DO_INITCALL(env_relocate);
 
 #if defined(CONFIG_CMD_PCI) || defined(CONFIG_PCI)
 	arm_pci_init();
@@ -526,16 +534,16 @@ void board_init_r (gd_t *id, ulong dest_addr)
 	/* IP Address */
 	gd->bd->bi_ip_addr = getenv_IPaddr ("ipaddr");
 
-	stdio_init ();	/* get the devices list going. */
+	DO_INITCALL(stdio_init);	/* get the devices list going. */
 
-	jumptable_init ();
+	DO_INITCALL(jumptable_init);
 
 #if defined(CONFIG_API)
 	/* Initialize API */
 	api_init ();
 #endif
 
-	console_init_r ();	/* fully init console as a device */
+	DO_INITCALL(console_init_r);	/* fully init console as a device */
 
 #if defined(CONFIG_ARCH_MISC_INIT)
 	/* miscellaneous arch dependent initialisations */
@@ -543,7 +551,7 @@ void board_init_r (gd_t *id, ulong dest_addr)
 #endif
 #if defined(CONFIG_MISC_INIT_R)
 	/* miscellaneous platform dependent initialisations */
-	misc_init_r ();
+	DO_INITCALL(misc_init_r);
 #endif
 
 	 /* set up exceptions */
-- 
1.7.4.1



More information about the U-Boot mailing list