[U-Boot] [PATCH v10 3/9] omap-common: add nand spl support
Tom Rini
trini at ti.com
Tue Sep 13 23:27:32 CEST 2011
From: Simon Schwarz <simonschwarzcor at googlemail.com>
Add NAND support for the new SPL structure.
Signed-off-by: Simon Schwarz <simonschwarzcor at gmail.com>
---
arch/arm/cpu/armv7/omap-common/spl.c | 46 ++++++++++++++++++++++++++++++-
arch/arm/cpu/armv7/omap3/board.c | 50 ++++++++++++++++++++++++++++++++-
arch/arm/include/asm/omap_common.h | 31 +++++++++++++++++++++
include/nand.h | 3 ++
4 files changed, 127 insertions(+), 3 deletions(-)
diff --git a/arch/arm/cpu/armv7/omap-common/spl.c b/arch/arm/cpu/armv7/omap-common/spl.c
index 1d301f4..53d10bf 100644
--- a/arch/arm/cpu/armv7/omap-common/spl.c
+++ b/arch/arm/cpu/armv7/omap-common/spl.c
@@ -26,6 +26,7 @@
#include <asm/u-boot.h>
#include <asm/utils.h>
#include <asm/arch/sys_proto.h>
+#include <nand.h>
#include <mmc.h>
#include <fat.h>
#include <timestamp_autogenerated.h>
@@ -173,7 +174,7 @@ end:
hang();
}
}
-
+static void mmc_load_image(void) __attribute__((unused));
static void mmc_load_image(void)
{
struct mmc *mmc;
@@ -207,12 +208,48 @@ static void mmc_load_image(void)
}
}
+#ifdef CONFIG_SPL_NAND_SUPPORT
+static void nand_load_image(void) __attribute__ ((unused));
+static void nand_load_image(void)
+{
+ struct image_header *header;
+
+ gpmc_init();
+ nand_init();
+
+ /*use CONFIG_SYS_TEXT_BASE as temporary storage area */
+ header = (struct image_header *)(CONFIG_SYS_TEXT_BASE);
+
+#ifdef CONFIG_NAND_ENV_DST
+ nand_spl_load_image(CONFIG_ENV_OFFSET,
+ CONFIG_SYS_NAND_PAGE_SIZE, (void *)header);
+ parse_image_header(header);
+ nand_spl_load_image(CONFIG_ENV_OFFSET, image_size,
+ (void *)image_load_addr);
+#ifdef CONFIG_ENV_OFFSET_REDUND
+ nand_spl_load_image(CONFIG_ENV_OFFSET_REDUND,
+ CONFIG_SYS_NAND_PAGE_SIZE, (void *)header);
+ parse_image_header(header);
+ nand_spl_load_image(CONFIG_ENV_OFFSET_REDUND, image_size,
+ (void *)image_load_addr);
+#endif
+#endif
+ /* Load u-boot */
+ nand_spl_load_image(CONFIG_SYS_NAND_U_BOOT_OFFS,
+ CONFIG_SYS_NAND_PAGE_SIZE, (void *)header);
+ parse_image_header(header);
+ nand_spl_load_image(CONFIG_SYS_NAND_U_BOOT_OFFS,
+ image_size, (void *)image_load_addr);
+ nand_deselect();
+}
+#endif /* CONFIG_SPL_NAND_SUPPORT */
void jump_to_image_no_args(void)
{
typedef void (*image_entry_noargs_t)(void)__attribute__ ((noreturn));
image_entry_noargs_t image_entry =
(image_entry_noargs_t) image_entry_point;
+ debug("image entry point: 0x%X\n", image_entry_point);
image_entry();
}
@@ -228,10 +265,17 @@ void board_init_r(gd_t *id, ulong dummy)
boot_device = omap_boot_device();
debug("boot device - %d\n", boot_device);
switch (boot_device) {
+#ifdef CONFIG_SPL_MMC_SUPPORT
case BOOT_DEVICE_MMC1:
case BOOT_DEVICE_MMC2:
mmc_load_image();
break;
+#endif
+#ifdef CONFIG_SPL_NAND_SUPPORT
+ case BOOT_DEVICE_NAND:
+ nand_load_image();
+ break;
+#endif
default:
printf("SPL: Un-supported Boot Device - %d!!!\n", boot_device);
hang();
diff --git a/arch/arm/cpu/armv7/omap3/board.c b/arch/arm/cpu/armv7/omap3/board.c
index 0448bc9..1b3ef69 100644
--- a/arch/arm/cpu/armv7/omap3/board.c
+++ b/arch/arm/cpu/armv7/omap3/board.c
@@ -39,6 +39,7 @@
#include <asm/cache.h>
#include <asm/armv7.h>
#include <asm/arch/gpio.h>
+#include <asm/omap_common.h>
/* Declarations */
extern omap3_sysinfo sysinfo;
@@ -56,6 +57,41 @@ static const struct gpio_bank gpio_bank_34xx[6] = {
const struct gpio_bank *const omap_gpio_bank = gpio_bank_34xx;
+#ifdef CONFIG_SPL_BUILD
+/*
+* We use static variables because global data is not ready yet.
+* Initialized data is available in SPL right from the beginning.
+* We would not typically need to save these parameters in regular
+* U-Boot. This is needed only in SPL at the moment.
+*/
+u32 omap3_boot_device = BOOT_DEVICE_NAND;
+
+/* auto boot mode detection is not possible for OMAP3 - hard code */
+u32 omap_boot_mode(void)
+{
+ switch (omap_boot_device()) {
+ case BOOT_DEVICE_MMC2:
+ return MMCSD_MODE_RAW;
+ case BOOT_DEVICE_MMC1:
+ return MMCSD_MODE_FAT;
+ break;
+ case BOOT_DEVICE_NAND:
+ return NAND_MODE_HW_ECC;
+ break;
+ default:
+ puts("spl: ERROR: unknown device - can't select boot mode\n");
+ hang();
+ }
+}
+
+u32 omap_boot_device(void)
+{
+ return omap3_boot_device;
+}
+
+#endif /* CONFIG_SPL_BUILD */
+
+
/******************************************************************************
* Routine: delay
* Description: spinning delay to use before udelay works
@@ -197,6 +233,10 @@ void s_init(void)
per_clocks_enable();
+#ifdef CONFIG_SPL_BUILD
+ preloader_console_init();
+#endif
+
if (!in_sdram)
mem_init();
}
@@ -245,7 +285,7 @@ void abort(void)
{
}
-#ifdef CONFIG_NAND_OMAP_GPMC
+#if defined(CONFIG_NAND_OMAP_GPMC) & !defined(CONFIG_SPL_BUILD)
/******************************************************************************
* OMAP3 specific command to switch between NAND HW and SW ecc
*****************************************************************************/
@@ -273,7 +313,7 @@ U_BOOT_CMD(
"[hw/sw] - Switch between NAND hardware (hw) or software (sw) ecc algorithm"
);
-#endif /* CONFIG_NAND_OMAP_GPMC */
+#endif /* CONFIG_NAND_OMAP_GPMC & !CONFIG_SPL_BUILD */
#ifdef CONFIG_DISPLAY_BOARDINFO
/**
@@ -410,3 +450,9 @@ void enable_caches(void)
dcache_enable();
}
#endif
+
+void omap_rev_string(char *omap_rev_string)
+{
+ sprintf(omap_rev_string, "OMAP3, sorry revision detection" \
+ " unimplemented");
+}
diff --git a/arch/arm/include/asm/omap_common.h b/arch/arm/include/asm/omap_common.h
index d3cb857..015cede 100644
--- a/arch/arm/include/asm/omap_common.h
+++ b/arch/arm/include/asm/omap_common.h
@@ -37,6 +37,7 @@
void preloader_console_init(void);
/* Boot device */
+#ifdef CONFIG_OMAP44XX /* OMAP4 */
#define BOOT_DEVICE_NONE 0
#define BOOT_DEVICE_XIP 1
#define BOOT_DEVICE_XIPWAIT 2
@@ -44,13 +45,43 @@ void preloader_console_init(void);
#define BOOT_DEVICE_ONE_NAND 4
#define BOOT_DEVICE_MMC1 5
#define BOOT_DEVICE_MMC2 6
+#elif CONFIG_OMAP34XX /* OMAP3 */
+#define BOOT_DEVICE_NONE 0
+#define BOOT_DEVICE_XIP 1
+#define BOOT_DEVICE_NAND 2
+#define BOOT_DEVICE_ONE_NAND 3
+#define BOOT_DEVICE_MMC2 5 /*emmc*/
+#define BOOT_DEVICE_MMC1 6
+#define BOOT_DEVICE_XIPWAIT 7
+#endif
/* Boot type */
#define MMCSD_MODE_UNDEFINED 0
#define MMCSD_MODE_RAW 1
#define MMCSD_MODE_FAT 2
+#define NAND_MODE_HW_ECC 3
+
+struct spl_image_info {
+ const char *name;
+ u8 os;
+ u32 load_addr;
+ u32 entry_point;
+ u32 size;
+};
+
+extern struct spl_image_info spl_image;
u32 omap_boot_device(void);
u32 omap_boot_mode(void);
+
+/* SPL common function s*/
+void spl_parse_image_header(const struct image_header *header);
+
+/* NAND SPL functions */
+void spl_nand_load_image(void);
+
+/* MMC SPL functions */
+void spl_mmc_load_image(void);
+
#endif /* _OMAP_COMMON_H_ */
diff --git a/include/nand.h b/include/nand.h
index 8d94b5c..3c5ef4e 100644
--- a/include/nand.h
+++ b/include/nand.h
@@ -132,6 +132,9 @@ int nand_lock( nand_info_t *meminfo, int tight );
int nand_unlock( nand_info_t *meminfo, ulong start, ulong length );
int nand_get_lock_status(nand_info_t *meminfo, loff_t offset);
+void nand_spl_load_image(loff_t offs, unsigned int size, uchar *dst);
+void nand_deselect(void);
+
#ifdef CONFIG_SYS_NAND_SELECT_DEVICE
void board_nand_select_device(struct nand_chip *nand, int chip);
#endif
--
1.7.0.4
More information about the U-Boot
mailing list